February 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Feb 1 00:41:31 EST 2007
Ending: Wed Feb 28 21:13:04 EST 2007
Messages: 1563

• [PATCH]Enabling Auto poweron after power is restored.   Manish Ahuja
• [PATCH]Enabling Auto poweron after power is restored.   Manish Ahuja
• [PATCH]Enabling Auto poweron after power is restored.   Manish Ahuja
• [PATCH]Enabling Auto poweron after power is restored.   Manish Ahuja
• [2.6 patch] remove the broken FB_S3TRIO driver   Alan
• [PATCHSET] libata: PATA driver for Celleb   Alan
• [PATCHSET] libata: PATA driver for Celleb   Alan
• [PATCH 2/2] Use resource_size_t for serial port IO addresses   Alan
• [PATCH 1/2] Define FIXED_PORT flag for serial_core   Alan
• [PATCH] Check mac-address first in fsl_soc.c   Jerry Van Baren
• device tree / how to build/compile & use with u-boot to boot uImage?   Jerry Van Baren
• [PATCH 0/2] libfdt: problems with real life blobs   Jerry Van Baren
• [PATCH 1/2] libfdt: Make the test values fdt endian   Jerry Van Baren
• [PATCH 2/2] libfdt: Use Jon's fdc for testing   Jerry Van Baren
• [PATCH 0/2] libfdt: problems with real life blobs   Jerry Van Baren
• libfdt: a fix but still broken   Jerry Van Baren
• libfdt: a fix but still broken   Jerry Van Baren
• libfdt: a fix but still broken   Jerry Van Baren
• libfdt: a fix but still broken   Jerry Van Baren
• powerbook/radeon PM problem   Johannes Berg
• [PATCH] powermac: proper time of day after resume   Johannes Berg
• CPU hotplug vs. cpufreq on ppc64   Johannes Berg
• [Alsa-devel] [PATCH] snd-aoa: fix onyx resume   Johannes Berg
• [PATCH] powermac: clean up PIC initialisation code   Johannes Berg
• [PATCH] powermac: proper time of day after resume   Johannes Berg
• [PATCH] powermac: proper time of day after resume   Johannes Berg
• powerbook/radeon PM problem   Johannes Berg
• CPU hotplug vs. cpufreq on ppc64   Johannes Berg
• [PATCH] powermac: clean up PIC initialisation code   Johannes Berg
• [PATCH] powermac: clean up PIC initialisation code   Johannes Berg
• CPU hotplug vs. cpufreq on ppc64   Johannes Berg
• [PATCH/RFC 00/10] suspend to disk for powermac G5   Johannes Berg
• [PATCH 01/10] dont copy pages that arent RAM   Johannes Berg
• [PATCH 02/10] windfarm: dont die on suspend thread signal   Johannes Berg
• [PATCH 03/10] powerpc: fix comment in kernel/irq.c   Johannes Berg
• [PATCH 04/10] powermac: clean up PIC initialisation code   Johannes Berg
• [PATCH 05/10] powermac: generic time suspend/resume code   Johannes Berg
• [RFC 06/10] powerpc: MPIC sys_device & suspend/resume   Johannes Berg
• [RFC 07/10] powermac: support G5 CPU hotplug   Johannes Berg
• [RFC 08/10] powerpc: dart iommu suspend   Johannes Berg
• [RFC 09/10] powermac: suspend to disk on G5   Johannes Berg
• [RFC 10/10] powermac: fix G5-cpufreq for cpu on/offline   Johannes Berg
• [PATCH revision 2] windfarm: dont die on suspend thread signal   Johannes Berg
• [PATCH 02/10] windfarm: dont die on suspend thread signal   Johannes Berg
• [RFC 08/10] powerpc: dart iommu suspend   Johannes Berg
• [RFC 08/10] powerpc: dart iommu suspend   Johannes Berg
• [linux-pm] [RFC 07/10] powermac: support G5 CPU hotplug   Johannes Berg
• [linux-pm] [RFC 08/10] powerpc: dart iommu suspend   Johannes Berg
• patches in powerpc.git   Johannes Berg
• [RFC 10/10] powermac: fix G5-cpufreq for cpu on/offline   Johannes Berg
• [RFC 08/10] powerpc: dart iommu suspend   Johannes Berg
• [RFC 07/10] powermac: support G5 CPU hotplug   Johannes Berg
• [RFC 06/10] powerpc: MPIC sys_device & suspend/resume   Johannes Berg
• [PATCH 00/12] powerpc/powermac power management patches   Johannes Berg
• [PATCH 01/12] powerpc: MPIC sys_device & suspend/resume   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 03/12] powerpc: dart iommu suspend   Johannes Berg
• [PATCH 04/12] powerpc: mark pages that dont exist as Nosave   Johannes Berg
• [PATCH 05/12] power management: no valid states w/o pm_ops + docs   Johannes Berg
• [PATCH 06/12] powerpc: fix suspend states again   Johannes Berg
• [PATCH 07/12] powermac: suspend to disk on G5   Johannes Berg
• [PATCH 08/12] powermac: fix G5-cpufreq for cpu on/offline   Johannes Berg
• [PATCH 09/12] powerpc: remove bogus comment about page_is_ram   Johannes Berg
• [PATCH 10/12] powerpc: remove unneeded exports in mem.c   Johannes Berg
• [PATCH 11/12] powermac: disallow pmu sleep notifiers from aborting sleep   Johannes Berg
• [PATCH 12/12] powermac: proper sleep management   Johannes Berg
• [PATCH 04/10] powermac: clean up PIC initialisation code   Johannes Berg
• [PATCH 11/12] powermac: disallow pmu sleep notifiers from aborting sleep   Johannes Berg
• [PATCH 10/12] powerpc: remove unneeded exports in mem.c   Johannes Berg
• [PATCH] aoa i2sbus: Stop Apple i2s DMA gracefully   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 11/12] powermac: disallow pmu sleep notifiers from aborting sleep   Johannes Berg
• [PATCH 13/12] mpic: add affinity callback for IPI "chip"   Johannes Berg
• [PATCH 10/12] powerpc: remove unneeded page_is_ram export   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [linux-pm] [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 13/12] mpic: add affinity callback for IPI "chip"   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 13/12] mpic: set IPIs to be per-CPU   Johannes Berg
• [PATCH 05/12] power management: no valid states w/o pm_ops + docs   Johannes Berg
• [linux-pm] [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• [PATCH 02/12] powermac: support G5 CPU hotplug   Johannes Berg
• Front LED on Mac mini G4   Johannes Berg
• Front LED on Mac mini G4   Johannes Berg
• several messages   Johannes Berg
• rtc suspend()/resume() restores system clock   Johannes Berg
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Arnd Bergmann
• [PATCH] [4/9] pasemi: Idle loops   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Arnd Bergmann
• [PATCH] [v2] [3/8] pasemi: Idle loops   Arnd Bergmann
• [PATCH 2/3] add soc setup code for USB DR OTG mode   Arnd Bergmann
• [PATCH 1/3] add USB setup code for 8349emds PB   Arnd Bergmann
• [PATCH 2/4] PS3: Move vuart declarations to ps3.h   Arnd Bergmann
• [PATCH 3/4] PS3: Fix DMA scatter-gather   Arnd Bergmann
• [PATCH 4/4] PS3: Enable USB mass storage   Arnd Bergmann
• [PATCH 1/4] PS3: Move system bus to platform directory   Arnd Bergmann
• [PATCH 3/4] PS3: Fix DMA scatter-gather   Arnd Bergmann
• [PATCH 1/3] add USB setup code for 8349emds PB   Arnd Bergmann
• [PATCH 1/3] add USB setup code for 8349emds PB   Arnd Bergmann
• [PATCH 1/3] add USB setup code for 8349emds PB   Arnd Bergmann
• [PATCH 0/3] spufs: don't need struct page for SPEs   Arnd Bergmann
• [PATCH] Celleb: improve htab lock   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [PATCH] Celleb: improve htab lock   Arnd Bergmann
• [PATCH] Celleb: improve htab lock   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [POWERPC] Wire up sys_getcpu   Arnd Bergmann
• [Cbe-oss-dev] [PATCH 1/3] spufs: remove need for struct page for SPEs   Arnd Bergmann
• [Cbe-oss-dev] [PATCH 2/3] powerpc: Remove SPU struct page's for PS3   Arnd Bergmann
• [Cbe-oss-dev] [PATCH 3/3] spufs: Fix bitrot of the SPU mmap facility   Arnd Bergmann
• [PATCH] Open Firmware serial port driver   Arnd Bergmann
• patches in powerpc.git   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [PATCHSET] libata: PATA driver for Celleb   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [RFC/PATCH] powerpc: introduce "slices" (aka. meta-segments)   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [PATCH 1/12]: sungem_phy: support bcm5461 phy, autoneg.   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [Cbe-oss-dev] [PATCH] powerpc: Introduce address space "slices"   Arnd Bergmann
• [0/14] Ebony support, 2nd spin   Arnd Bergmann
• [0/14] Ebony support, 2nd spi   Arnd Bergmann
• [0/14] Ebony support, 2nd spi   Arnd Bergmann
• [0/14] Ebony support, 2nd spin   Arnd Bergmann
• [POWERPC] wire up sys_epoll_pwait   Arnd Bergmann
• [PATCH] ps3: always make sure we're running on a PS3   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Arnd Bergmann
• EMAC device-tree binding (#2)   Segher Boessenkool
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH v3] powerpc: delete boot-cpu property from all DTS files   Segher Boessenkool
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Segher Boessenkool
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Segher Boessenkool
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Segher Boessenkool
• [PATCH] powerpc: add of_get_mac_address() and update fsl_soc.c to use it   Segher Boessenkool
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   Segher Boessenkool
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   Segher Boessenkool
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [PATCH 15/16] Add device tree for Ebony   Segher Boessenkool
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Segher Boessenkool
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Segher Boessenkool
• [PATCH] powerpc: add of_get_mac_address() and update fsl_soc.c to use it   Segher Boessenkool
• [PATCH 02/10] powerpc: Add device tree fixups for the EFIKA   Segher Boessenkool
• macros and dtc   Segher Boessenkool
• [PATCH 10/14] Early serial debug support for PPC44x   Segher Boessenkool
• [0/14] Ebony support, 2nd spin   Segher Boessenkool
• [0/14] Ebony support, 2nd spi   Segher Boessenkool
• [RFC 3/3] zImage: Exception vector support   Segher Boessenkool
• [0/14] Ebony support, 2nd spi   Segher Boessenkool
• [PATCH 12/14] Add device tree for Ebony   Segher Boessenkool
• [PATCH 12/14] Add device tree for Ebony   Segher Boessenkool
• [PATCH 12/14] Add device tree for Ebony   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• platform_ops.malloc() vs. realloc()   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] PowerPC: select default image for Linkstation   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [RFC 3/3] zImage: Exception vector support   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: Remove some redunant isync instructions   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• Make sure we populate the initroot filesystem late enough   Segher Boessenkool
• #cpus property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• Make sure we populate the initroot filesystem late enough   Segher Boessenkool
• [PATCH] powerpc: update interrupt info in booting-without-of.txt   Segher Boessenkool
• [RFC] powerpc: Document new property called interrupt-parents   Segher Boessenkool
• [PATCH] powerpc: document new interrupt-array property   Segher Boessenkool
• [RFC] powerpc: Document new property called interrupt-parents   Segher Boessenkool
• patches in powerpc.git   Vitaly Bordug
• [PATCH] Fix compile failure in cpm_uart_cpm2   Vitaly Bordug
• Okay to change default zImage link/load address?   Josh Boyer
• Okay to change default zImage link/load address?   Josh Boyer
• [PATCH 18/19] bootwrapper: Add xlate_reg(), and use it to find serial registers.   Josh Boyer
• [PATCH 1/16] Remove ibm4{xx,4x}.h from arch/powerpc   Josh Boyer
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   Josh Boyer
• [PATCH 7/16] Early serial debug support for PPC44x   Josh Boyer
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   Josh Boyer
• [PATCH 6/16] Port 44x MMU definitions to ARCH=powerpc   Josh Boyer
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   Josh Boyer
• [PATCH 7/16] Early serial debug support for PPC44x   Josh Boyer
• [PATCH 7/16] Early serial debug support for PPC44x   Josh Boyer
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   Josh Boyer
• [PATCH 15/16] Add device tree for Ebony   Josh Boyer
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   Josh Boyer
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   Josh Boyer
• Time to put bootwrapper patches into powerpc.git?   Josh Boyer
• [RFC 3/3] zImage: Exception vector support   Josh Boyer
• [RFC 3/3] zImage: Exception vector support   Josh Boyer
• [RFC 3/3] zImage: Exception vector support   Josh Boyer
• [PATCH 13/14] Re-organize Kconfig code for 4xx in arch/powerpc   Josh Boyer
• [0/14] Ebony support, 2nd spin   Josh Boyer
• [0/14] Ebony support, 2nd spin   Josh Boyer
• [0/14] Ebony support, 2nd spin   Josh Boyer
• [0/14] Ebony support, 2nd spin   Josh Boyer
• [PATCH 12/14] Add device tree for Ebony   Josh Boyer
• [0/14] Ebony support, 2nd spi   Josh Boyer
• [0/14] Ebony support, 2nd spi   Josh Boyer
• [0/14] Ebony support, 2nd spi   Josh Boyer
• PMAC: Problems with devices that use PCI shared memory on 2nd PCI bus?   Bob Brose
• 2.6.20 zImage.prep??   Bob Brose
• [PATCH] ps3: don't call ps3_system_bus_driver_register on other platforms   David Brownell
• [spi-devel-general] [PATCH] Adapt spi_mpc83xx SPI driver for 832x   David Brownell
• several messages   David Brownell
• [PATCH] powerpc: Don't write reserved values to MAS1[TSIZE]   Becky Bruce
• [PATCH] powerpc: UPDATED Don't write reserved values to MAS1[TSIZE]   Becky Bruce
• [PATCH] powerpc/ppc: Drop use of SYNC macro in head_fsl_booke.S   Becky Bruce
• 2.6.20-rc7: known regressions   Adrian Bunk
• 2.6.20-rc7: known regressions (v2) (part 1)   Adrian Bunk
• [2.6 patch] remove the broken FB_S3TRIO driver   Adrian Bunk
• [2.6 patch] drivers/macintosh/mac_hid.c: make code static   Adrian Bunk
• [2.6 patch] unexport mac_hid_mouse_emulate_buttons   Adrian Bunk
• [PATCH 2.6.20] arch PowerPC: user ARRAY_SIZE macro when appropriate   Ahmed S. Darwish
• [PATCH 2.6.20] arch PPC: user ARRAY_SIZE macro when appropriate   Ahmed S. Darwish
• [PATCH] Missing include in include/asm-powerpc/prom.h   Mathieu Desnoyers
• [PATCH] Missing ifndef __ASSEMBLY__ in include/asm-powerpc/dcr.h   Mathieu Desnoyers
• [PATCH] powerpc 405 : remove 4xx platform from Makefile   Mathieu Desnoyers
• [PATCH] Missing ifndef __ASSEMBLY__ in include/asm-powerpc/dcr.h   Mathieu Desnoyers
• [PATCH] Missing include in include/asm-powerpc/prom.h   Mathieu Desnoyers
• [PATCH] powerpc 405 : remove 4xx platform from Makefile   Mathieu Desnoyers
• [PATCH] Powerpc move of_irq_to_resource from prom.h to prom_parse.c   Mathieu Desnoyers
• [PATCH] arch/powerpc missing export vgacon_remap_base   Mathieu Desnoyers
• Multicast problem on MPC8272ADS   Vikram Dhir
• [PATCH] include stddef.h in asm-powerpc/current.h to get definition of offsetof   Hugh Dickins
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Roland Dreier
• [PATCH 6/16] Port 44x MMU definitions to ARCH=powerpc   Roland Dreier
• [PATCH 16/16] Support for Ebony in arch/powerpc   Roland Dreier
• [PATCH 2.6.21-rc1 1/5] ehca: reworked irq handler to avoid/reduce missed irq events   Roland Dreier
• [PATCH 2.6.21-rc1 4/5] ehca: replace yield() by wait_for_completion()   Roland Dreier
• [PATCH 2.6.21-rc1 5/5] ehca: query_port() returns LINK_UP instead UNKNOWN   Roland Dreier
• [PATCH 2.6.21-rc1 4/5] ehca: replace yield() by wait_for_completion()   Roland Dreier
• [PATCH] ehea: Optional TX/RX path optimized for SMP   Roland Dreier
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Zhu Ebony-r57400
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Zhu Ebony-r57400
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Zhu Ebony-r57400
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Zhu Ebony-r57400
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Zhu Ebony-r57400
• [PATCH] powermac: proper time of day after resume   Michael Ellerman
• [PATCH 3/3] PS3: System manager support   Michael Ellerman
• [PATCH 3/3] PS3: System manager support   Michael Ellerman
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Michael Ellerman
• [PATCH] Update udbg_progress() to display the integer   Michael Ellerman
• [PATCH 1/4] Consolidate pseries platform header files into pseries.h   Michael Ellerman
• [PATCH 2/4] Cleanup pseries smp initialisation code   Michael Ellerman
• [PATCH 3/4] Cleanup pseries kexec code   Michael Ellerman
• [PATCH 4/4] Move MPIC smp routines into mpic.c   Michael Ellerman
• [PATCH 4/16] powerpc: Allow duplicate lmb_reserve() calls   Michael Ellerman
• patches in powerpc.git   Michael Ellerman
• [PATCH] Fix cut and paste breakage in arch/powerpc/platforms/pseries/pseries.h   Michael Ellerman
• [PATCH] Add missing newline in xmon help output   Michael Ellerman
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Michael Ellerman
• [patch] ipmi: check, if default ports are accessible on PPC   Michael Ellerman
• Front LED on Mac mini G4   Florian Fainelli
• Front LED on Mac mini G4   Florian Fainelli
• patches in powerpc.git   Pavel Fedin
• [PATCH 2.6.21-rc1] ibmebus: Support dynamic addition and removal of adapters   Joachim Fenkes
• [PATCH 2.6.21-rc1] ibmebus: Support dynamic addition and removal of adapters   Joachim Fenkes
• [PATCH 2.6.21-rc1] ibmebus: Use of_device_uevent()   Joachim Fenkes
• [PATCH 2.6.21-rc1] powerpc: Make of_device_uevent() compatible with ibmebus   Joachim Fenkes
• [PATCH 2.6.21-rc1] powerpc: Make of_device_uevent() compatible with ibmebus   Joachim Fenkes
• [PATCH 2.6.21-rc1] ibmebus: Support dynamic addition and removal of adapters   Joachim Fenkes
• options for root file system for MPC8548   Andy Fleming
• [PATCH] Added QE to the list of default scanned OF devices   Andy Fleming
• [PATCH 0/2] Add 8568 MDS support   Andy Fleming
• [PATCH 1/2] Added support for the MPC8568E MDS board   Andy Fleming
• [PATCH 2/2] Create a defconfig for the 8568 MDS board   Andy Fleming
• Subject: [PATCH] Add support for the 8568 MDS board   Andy Fleming
• [PATCH v2] Add a defconfig for the 8568 MDS   Andy Fleming
• Subject: [PATCH] Add support for the 8568 MDS board   Andy Fleming
• Subject: [PATCH] Add support for the 8568 MDS board   Andy Fleming
• [RFC 0/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 1/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 2/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 3/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 4/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 5/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 6/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [RFC 7/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• MPC85xx git branch - problem with Marvel SATA driver...   Andy Fleming
• MPC85xx git branch - problem with Marvel SATA driver...   Andy Fleming
• [RFC 5/7] Unite all PCI-e on 85xx and 86xx under one codebase   Andy Fleming
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Kumar Gala
• [PATCH 2/3] [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads   Kumar Gala
• [PATCH] [5/9] pasemi: Implement restart   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH 3/3] 8349emds default dts updates for USB change   Kumar Gala
• [PATCH 2/3] add soc setup code for USB DR OTG mode   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH 3/3] 8349emds default dts updates for USB change   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH 2/3] add soc setup code for USB DR OTG mode   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH] generic RTC support for PPC   Kumar Gala
• [PATCH] generic RTC support for PPC   Kumar Gala
• [PATCH 3/3] DTS updates for 8349emds USB peripheral support   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH 2/3] add platform_device for USB DR pheripheral driver   Kumar Gala
• [PATCH 1/2] 83xx: ioremap() the entire IMMR for misc register blocks.   Kumar Gala
• [PATCH 2/2] 83xx: Don't ioremap() from the reset function.   Kumar Gala
• [PATCH] Update udbg_progress() to display the integer   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [dtc] Allow references to labels   Kumar Gala
• [dtc] Allow multipart property values   Kumar Gala
• [dtc] Allow multipart property values   Kumar Gala
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Kumar Gala
• Please pull from 'for_paulus' branch   Kumar Gala
• [patch][0/5] powerpc: Add support to fully comply with IEEE-754 standard   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• mac-address vs. local-mac-address   Kumar Gala
• mac-address vs. local-mac-address   Kumar Gala
• mac-address vs. local-mac-address   Kumar Gala
• [PATCH] Add base support for the MPC8313E RDB   Kumar Gala
• patches in powerpc.git   Kumar Gala
• [PATCH] Add base support for the MPC8313E RDB   Kumar Gala
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• [PATCH] ppc: Fix booke watchdog initialization   Kumar Gala
• [PATCH 1/3] add USB setup code for 8349emds PB   Kumar Gala
• [PATCH 2/3] add platform_device for USB DR pheripheral driver   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Kumar Gala
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Kumar Gala
• [PATCH] Rename ucc_slow_info.us_regs to .regs   Kumar Gala
• [PATCH] Added QE to the list of default scanned OF devices   Kumar Gala
• [patch][0/5] powerpc V2 : Add support to fully comply with IEEE-754 standard   Kumar Gala
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Kumar Gala
• [PATCH] linkstation / kurobox support   Kumar Gala
• No subject   Kumar Gala
• Please pull from 'for_paulus' branch   Kumar Gala
• [PATCH] Added QE to the list of default scanned OF devices   Kumar Gala
• [PATCH] Added QE to the list of default scanned OF devices   Kumar Gala
• [UPDATED] Please pull from 'for_paulus' branch   Kumar Gala
• [PATCH 1/2] Added support for the MPC8568E MDS board   Kumar Gala
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Kumar Gala
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Kumar Gala
• [PATCH 1/2] Added support for the MPC8568E MDS board   Kumar Gala
• [PATCH] Updated mpc834x_itx_defconfig   Kumar Gala
• [PATCH] Updated mpc834x_itx_defconfig   Kumar Gala
• [PATCH] powerpc: Add support for MPC8349E-mITX-GP   Kumar Gala
• [PATCH] Check mac-address first in fsl_soc.c   Kumar Gala
• Discussion about iopa()   Kumar Gala
• Discussion about iopa()   Kumar Gala
• Discussion about iopa()   Kumar Gala
• Discussion about iopa()   Kumar Gala
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Kumar Gala
• [PATCH 02/10] powerpc: Add device tree fixups for the EFIKA   Kumar Gala
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Kumar Gala
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Kumar Gala
• [PATCH] Check mac-address first in fsl_soc.c   Kumar Gala
• [PATCH] Check mac-address first in fsl_soc.c   Kumar Gala
• [PATCH] powerpc: UPDATED Don't write reserved values to MAS1[TSIZE]   Kumar Gala
• Subject: [PATCH] Add support for the 8568 MDS board   Kumar Gala
• [PATCH v2] Add a defconfig for the 8568 MDS   Kumar Gala
• [PATCH] powerpc: Add support for MPC8349E-mITX-GP   Kumar Gala
• [PATCH] Updated mpc834x_itx_defconfig   Kumar Gala
• Subject: [PATCH] Add support for the 8568 MDS board   Kumar Gala
• [PATCH] Check mac-address first in fsl_soc.c   Kumar Gala
• Subject: [PATCH] Add support for the 8568 MDS board   Kumar Gala
• [PATCH] Check mac-address first in fsl_soc.c   Kumar Gala
• Please pull from 'for_paulus' branch   Kumar Gala
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Kumar Gala
• USB Host controller for MPC8548e board   Kumar Gala
• [PATCH] powerpc/ppc: Drop use of SYNC macro in head_fsl_booke.S   Kumar Gala
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Kumar Gala
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Kumar Gala
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   Kumar Gala
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Kumar Gala
• [RFC 7/7] Unite all PCI-e on 85xx and 86xx under one codebase   Kumar Gala
• [RFC 7/7] Unite all PCI-e on 85xx and 86xx under one codebase   Kumar Gala
• [RFC 2/7] Unite all PCI-e on 85xx and 86xx under one codebase   Kumar Gala
• [POWERPC] 83xx: Cleaned up 83xx platform dts files   Kumar Gala
• purpose of /chosen node (was RE: [PATCH] powerpc: deleteboot-cpu and chosen nodes from all DTSfiles)   Kumar Gala
• [PATCH] Add missing of_node_put() in mpc86xx_hpcn_init_irq().   Kumar Gala
• [PATCH] Remove obsolete setting of ROOT_DEV for 85xx and 86xx platforms.   Kumar Gala
• [PATCH] powerpc: clean up ucc_slow.c and ucc_fast.c   Kumar Gala
• [POWERPC] 86xx: Cleaned up platform dts files   Kumar Gala
• Please pull from 'for_paulus' branch   Kumar Gala
• Please pull from 'for_paulus' branch   Kumar Gala
• macros and dtc   Kumar Gala
• macros and dtc   Kumar Gala
• [PATCH] powerpc: document new interrupt-array property   Kumar Gala
• [patch][5/5] powerpc V2: Add the general support for Embedded Floating-Point instructions   Kumar Gala
• [PATCH] powerpc: document new interrupt-array property   Kumar Gala
• [RFC 2/7] Unite all PCI-e on 85xx and 86xx under one codebase   Kumar Gala
• [RFC 2/7] Unite all PCI-e on 85xx and 86xx under one codebase   Kumar Gala
• Make sure we populate the initroot filesystem late enough   Kumar Gala
• Another Update (SUCCESS) on: MPC85xx git/MPC8548cds - PCI/PCIE problemS w/ Marvel SATA driver...   Kumar Gala
• [PATCH] spidernet : fix memory leak in spider_net_stop   Jeff Garzik
• [PATCH 1/4] ucc_geth: Change private immrbar_virt_to_phys to generic iopa   Jeff Garzik
• [PATCH 1/3] libata: add another IRQ calls (core and headers)   Jeff Garzik
• [PATCH 2/3] libata: add another IRQ calls (libata drivers)   Jeff Garzik
• [PATCH 0/4] spidernet: support for Celleb   Jeff Garzik
• [PATCH 2.6.21-rc1] ehea: Fixed error recovery   Jeff Garzik
• [PATCHSET] libata: PATA driver for Celleb   Jeff Garzik
• spidernet (was Re: [PATCHSET] libata: PATA driver for Celleb)   Jeff Garzik
• [PATCH] add delay around sl82c105_reset_engine calls   Jeff Garzik
• [PATCH] use winbond libata instead of ide driver for pseries CD drives   Jeff Garzik
• [PATCH 3/3] libata: PATA driver for Celleb   Jeff Garzik
• I don't understand #size-cells = <0>   David Gibson
• EMAC device-tree binding (#2)   David Gibson
• [PATCH] powerpc 405 : remove 4xx platform from Makefile   David Gibson
• [PATCH] Missing ifndef __ASSEMBLY__ in include/asm-powerpc/dcr.h   David Gibson
• [powerpc] Compile fixes for arch/powerpc dcr code   David Gibson
• Remove ibm4{xx,4x}.h from arch/powerpc   David Gibson
• [powerpc] Use udbg_early_init() on ppc32   David Gibson
• [dtc] Allow multipart property values   David Gibson
• [dtc] Allow references to labels   David Gibson
• [dtc] Allow multipart property values   David Gibson
• [dtc] Allow multipart property values   David Gibson
• [dtc] Allow multipart property values   David Gibson
• [PATCH 11/19] bootwrapper: Add ft_find_device_rel().   David Gibson
• [PATCH 19/19] bootwrapper: compatibility layer for old U-Boots (a.k.a. cuImage, cuboot)   David Gibson
• More DCR native fixups   David Gibson
• [resend] Use udbg_early_init() on ppc32   David Gibson
• powerpc: Allow duplicate lmb_reserve() calls   David Gibson
• Okay to change default zImage link/load address?   David Gibson
• Okay to change default zImage link/load address?   David Gibson
• device tree / how to build/compile & use with u-boot to boot uImage?   David Gibson
• [PATCH 15/19] bootwrapper: Add initrd information to the device tree in ft_finalize().   David Gibson
• device tree / how to build/compile & use with u-boot to boot uImage?   David Gibson
• Subject: [PATCH] Add support for the 8568 MDS board   David Gibson
• Okay to change default zImage link/load address?   David Gibson
• [PATCH 19/19] bootwrapper: compatibility layer for old U-Boots (a.k.a. cuImage, cuboot)   David Gibson
• Subject: [PATCH] Add support for the 8568 MDS board   David Gibson
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   David Gibson
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   David Gibson
• [PATCH 15/19] bootwrapper: Add initrd information to the device tree in ft_finalize().   David Gibson
• [PATCH 18/19] bootwrapper: Add xlate_reg(), and use it to find serial registers.   David Gibson
• [resend] Use udbg_early_init() on ppc32   David Gibson
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   David Gibson
• [PATCH 1/16] Remove ibm4{xx,4x}.h from arch/powerpc   David Gibson
• [PATCH 2/16] More DCR native fixups   David Gibson
• [PATCH 3/16] [powerpc] Use udbg_early_init() on ppc32   David Gibson
• [PATCH 4/16] powerpc: Allow duplicate lmb_reserve() calls   David Gibson
• [PATCH 5/16] powerpc: Add zImage platform hook for kernel address   David Gibson
• [PATCH 6/16] Port 44x MMU definitions to ARCH=powerpc   David Gibson
• [PATCH 7/16] Early serial debug support for PPC44x   David Gibson
• [PATCH 8/16] Define FIXED_PORT flag for serial_core   David Gibson
• [PATCH 9/16] Use resource_size_t for serial port IO addresses   David Gibson
• [PATCH 10/16] Add support for BSS stack for zImage wrapper   David Gibson
• [PATCH 11/16] zImage wrapper for Ebony   David Gibson
• [PATCH 12/16] Automatically lmb_reserve() initrd   David Gibson
• [PATCH 13/16] Add initrd properties to device tree from zImage   David Gibson
• [PATCH 14/16] Add arch/powerpc driver for UIC, PPC4xx interrupt controller   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH 16/16] Support for Ebony in arch/powerpc   David Gibson
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   David Gibson
• [PATCH 7/16] Early serial debug support for PPC44x   David Gibson
• [PATCH 11/16] zImage wrapper for Ebony   David Gibson
• [PATCH 16/16] Support for Ebony in arch/powerpc   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   David Gibson
• [PATCH 7/16] Early serial debug support for PPC44x   David Gibson
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   David Gibson
• [PATCH 7/16] Early serial debug support for PPC44x   David Gibson
• [PATCH 15/19] bootwrapper: Add initrd information to the device tree in ft_finalize().   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• Automatically lmb_reserve() initrd   David Gibson
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   David Gibson
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   David Gibson
• [PATCH 7/16] Early serial debug support for PPC44x   David Gibson
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   David Gibson
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   David Gibson
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles   David Gibson
• [PATCH v3] powerpc: delete boot-cpu property from all DTS files   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• [PATCH 15/16] Add device tree for Ebony   David Gibson
• More DCR native fixups   David Gibson
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   David Gibson
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   David Gibson
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   David Gibson
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   David Gibson
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   David Gibson
• [DTC PATCH] Add some initial test cases.   David Gibson
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   David Gibson
• [0/16] Preliminary Ebony (440GP) support for arch/powerpc   David Gibson
• [0/3] RFC: Cleanups and improvements to the zImage wrapper   David Gibson
• [PATCH 1/3] zImage: Add more flexible gunzip convenience functions   David Gibson
• [PATCH 2/3] zImage: Cleanup and improve prep_kernel()   David Gibson
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   David Gibson
• [POWERPC] 86xx: Cleaned up platform dts files   David Gibson
• [PATCH 19/19] bootwrapper: compatibility layer for old U-Boots (a.k.a. cuImage, cuboot)   David Gibson
• [PATCH 2/3] zImage: Cleanup and improve prep_kernel()   David Gibson
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   David Gibson
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   David Gibson
• macros and dtc   David Gibson
• [PATCH 0/2] libfdt: problems with real life blobs   David Gibson
• [0/14] Ebony support, 2nd spin   David Gibson
• [PATCH 1/14] powerpc: Allow duplicate lmb_reserve() calls   David Gibson
• [PATCH 2/14] Automatically lmb_reserve() initrd   David Gibson
• [PATCH 3/14] Define FIXED_PORT flag for serial_core   David Gibson
• [PATCH 4/14] Use resource_size_t for serial port IO addresses   David Gibson
• [PATCH 5/14] zImage: Add more flexible gunzip convenience functions   David Gibson
• [PATCH 6/14] zImage: Cleanup and improve prep_kernel()   David Gibson
• [PATCH 7/14] zImage: Cleanup and improve zImage entry point   David Gibson
• [PATCH 8/14] zImage wrapper for Ebony   David Gibson
• [PATCH 9/14] Port 44x MMU definitions to ARCH=powerpc   David Gibson
• [PATCH 10/14] Early serial debug support for PPC44x   David Gibson
• [PATCH 11/14] Add arch/powerpc driver for UIC, PPC4xx interrupt controller   David Gibson
• [PATCH 12/14] Add device tree for Ebony   David Gibson
• [PATCH 13/14] Re-organize Kconfig code for 4xx in arch/powerpc   David Gibson
• [PATCH 14/14] Support for Ebony in arch/powerpc   David Gibson
• [RFC 2/3] zImage: SMP hold   David Gibson
• [RFC 3/3] zImage: Exception vector support   David Gibson
• Use resource_size_t for serial MMIO addresses   David Gibson
• [PATCH 1/2] Define FIXED_PORT flag for serial_core   David Gibson
• [PATCH 2/2] Use resource_size_t for serial port IO addresses   David Gibson
• [RFC 3/3] zImage: Exception vector support   David Gibson
• [RFC 3/3] zImage: Exception vector support   David Gibson
• [PATCH 4/14] Use resource_size_t for serial port IO addresses   David Gibson
• [PATCH 10/14] Early serial debug support for PPC44x   David Gibson
• [PATCH 12/14] Add device tree for Ebony   David Gibson
• [PATCH 13/14] Re-organize Kconfig code for 4xx in arch/powerpc   David Gibson
• [PATCH] powerpc: Introduce address space "slices"   David Gibson
• [0/14] Ebony support, 2nd spin   David Gibson
• [0/14] Ebony support, 2nd spin   David Gibson
• [0/14] Ebony support, 2nd spi   David Gibson
• [0/14] Ebony support, 2nd spi   David Gibson
• [PATCH 12/14] Add device tree for Ebony   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• platform_ops.malloc() vs. realloc()   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• libfdt: a fix but still broken   David Gibson
• libfdt: a fix but still broken   David Gibson
• libfdt: a fix but still broken   David Gibson
• libfdt: a fix but still broken   David Gibson
• [0/14] Ebony support, 2nd spin   David Gibson
• [dtc] Fix flat_dt_property structure   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• #cpus property   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: remove ununused, undocumented #cpus property from cpus node   David Gibson
• [PATCH] powerpc: document new interrupt-array property   David Gibson
• [PATCH] powerpc: update interrupt info in booting-without-of.txt   David Gibson
• [RFC] powerpc: Document new property called interrupt-parents   David Gibson
• [0/2] Automatically reserve the initrd   David Gibson
• [PATCH 1/2] powerpc: Allow duplicate lmb_reserve() calls   David Gibson
• [PATCH 2/2] Automatically lmb_reserve() initrd   David Gibson
• [PATCH] Fix compile failure in cpm_uart_cpm2   Paul Gortmaker
• [PATCH] Fix compile failure in cpm_uart_cpm2   Paul Gortmaker
• [RFC] mpc5200 device tree bindings refinement   Mark A. Greer
• [RFC] mpc5200 device tree bindings refinement   Mark A. Greer
• Okay to change default zImage link/load address?   Mark A. Greer
• Okay to change default zImage link/load address?   Mark A. Greer
• [PATCH 15/19] bootwrapper: Add initrd information to the device tree in ft_finalize().   Mark A. Greer
• [PATCH 17/19] bootwrapper: Add dt_ops methods.   Mark A. Greer
• [PATCH 18/19] bootwrapper: Add xlate_reg(), and use it to find serial registers.   Mark A. Greer
• Okay to change default zImage link/load address?   Mark A. Greer
• Okay to change default zImage link/load address?   Mark A. Greer
• Okay to change default zImage link/load address?   Mark A. Greer
• [RFC] mpc5200 device tree bindings refinement   Mark A. Greer
• Time to put bootwrapper patches into powerpc.git?   Mark A. Greer
• Make sure we populate the initroot filesystem late enough   Paul TBBle Hampson
• [PATCH 02/10] windfarm: dont die on suspend thread signal   Christoph Hellwig
• [Cbe-oss-dev] [PATCH 3/3] spufs: remove need for struct page for SPEs   Christoph Hellwig
• [PATCH] Celleb: improve htab lock   Christoph Hellwig
• [PATCH 2/10] ps3: AV Settings Driver   Christoph Hellwig
• [Cbe-oss-dev] [PATCH] spufs: Fix bitrot of the SPU mmap facility (#2)   Christoph Hellwig
• [PATCH 2.6.21-rc1 1/5] ehca: reworked irq handler to avoid/reduce missed irq events   Christoph Hellwig
• [PATCH 2.6.21-rc1 4/5] ehca: replace yield() by wait_for_completion()   Christoph Hellwig
• [patch 1/4] ps3fb: thread updates   Christoph Hellwig
• [patch 1/4] ps3fb: thread updates   Christoph Hellwig
• [PATCH 1/4 (updated)] ps3fb: thread updates   Christoph Hellwig
• Okay to change default zImage link/load address?   Olaf Hering
• [PATCH] move variables in drivers/macintosh to bss   Olaf Hering
• [PATCH] add delay around sl82c105_reset_engine calls   Olaf Hering
• [PATCH] cleanup variable usage in mesh interrupt handler   Olaf Hering
• [PATCH] mark winbond IDE PCI resources with start 0 as unassigned   Olaf Hering
• [PATCH] correct AC Power: in /proc/pmu/info on ibook1   Olaf Hering
• [PATCH] use winbond libata instead of ide driver for pseries CD drives   Olaf Hering
• [PATCH] use winbond libata instead of ide driver for pseries CD drives   Olaf Hering
• [PATCH] include stddef.h in asm-powerpc/current.h to get definition of offsetof   Olaf Hering
• No Subject   Benjamin Herrenschmidt
• EMAC device-tree binding (#2)   Benjamin Herrenschmidt
• EMAC device-tree binding (#2)   Benjamin Herrenschmidt
• powerbook/radeon PM problem   Benjamin Herrenschmidt
• I don't understand #size-cells = <0>   Benjamin Herrenschmidt
• [Cbe-oss-dev] spidernet: dynamic phy setup code   Benjamin Herrenschmidt
• [PATCH] [3/9] pasemi: Machine check handler   Benjamin Herrenschmidt
• [PATCH] [7/9] pasemi: Configure DMA controller interrupts   Benjamin Herrenschmidt
• [PATCH 0/11] Patches for Toshiba Cell reference set   Benjamin Herrenschmidt
• [PATCH 6/11] Celleb: support udbg   Benjamin Herrenschmidt
• spidernet: dynamic phy setup code   Benjamin Herrenschmidt
• [PATCH] Assign all PCI busses on G3 Blue & White   Benjamin Herrenschmidt
• CPU hotplug vs. cpufreq on ppc64   Benjamin Herrenschmidt
• [PATCH] powermac: clean up PIC initialisation code   Benjamin Herrenschmidt
• EMAC device-tree binding #3 (& driver)   Benjamin Herrenschmidt
• [PATCH] Missing include in include/asm-powerpc/prom.h   Benjamin Herrenschmidt
• [PATCH] Missing ifndef __ASSEMBLY__ in include/asm-powerpc/dcr.h   Benjamin Herrenschmidt
• [PATCH 02/10] windfarm: dont die on suspend thread signal   Benjamin Herrenschmidt
• [PATCH 03/10] powerpc: fix comment in kernel/irq.c   Benjamin Herrenschmidt
• [PATCH revision 2] windfarm: dont die on suspend thread signal   Benjamin Herrenschmidt
• [PATCH revision 2] windfarm: dont die on suspend thread signal   Benjamin Herrenschmidt
• [PATCH 03/10] powerpc: fix comment in kernel/irq.c   Benjamin Herrenschmidt
• [Cbe-oss-dev] [RFC, PATCH] CELL PPU Oprofile SPU profiling updated patch   Benjamin Herrenschmidt
• [powerpc] Compile fixes for arch/powerpc dcr code   Benjamin Herrenschmidt
• [PATCH] (2.6.20-rt3) PowerPC: convert spinlocks into raw   Benjamin Herrenschmidt
• [PATCH 0/10] ps3av/fb drivers for 2.6.21   Benjamin Herrenschmidt
• [PATCH 0/11] Patches for Toshiba Cell reference set   Benjamin Herrenschmidt
• [PATCH 0/11] Patches for Toshiba Cell reference set   Benjamin Herrenschmidt
• [PATCH] Update udbg_progress() to display the integer   Benjamin Herrenschmidt
• [PATCH 10/11] Celleb: basic support   Benjamin Herrenschmidt
• [PATCH 3/4] PS3: Fix DMA scatter-gather   Benjamin Herrenschmidt
• [PATCH 0/3] spufs: don't need struct page for SPEs   Benjamin Herrenschmidt
• [PATCH 1/3] add vm_insert_pfn()   Benjamin Herrenschmidt
• [PATCH 2/3] Add NOPFN_REFAULT result from vm_ops->nopfn()   Benjamin Herrenschmidt
• [PATCH 3/3] spufs: remove need for struct page for SPEs   Benjamin Herrenschmidt
• [PATCH 3/3] spufs: remove need for struct page for SPEs   Benjamin Herrenschmidt
• Revised: [PATCH 5/11] Celleb: htab routines   Benjamin Herrenschmidt
• [PATCH] Update udbg_progress() to display the integer   Benjamin Herrenschmidt
• [Linux-fbdev-devel] [PATCH 0/10] ps3av/fb drivers for 2.6.21   Benjamin Herrenschmidt
• Program Check (700) in lpar.c:551 was: Re: patches in powerpc.git   Benjamin Herrenschmidt
• Program Check (700) in lpar.c:551 was: Re: patches in powerpc.git   Benjamin Herrenschmidt
• mac-address vs. local-mac-address   Benjamin Herrenschmidt
• mac-address vs. local-mac-address   Benjamin Herrenschmidt
• [PATCH 3/3] spufs: remove need for struct page for SPEs   Benjamin Herrenschmidt
• [PATCH 0/4] spidernet: support for Celleb   Benjamin Herrenschmidt
• [PATCH 13/12] mpic: add affinity callback for IPI "chip"   Benjamin Herrenschmidt
• [PATCH 10/11] Celleb: basic support   Benjamin Herrenschmidt
• [PATCH] Celleb: improve htab lock   Benjamin Herrenschmidt
• Discussion about iopa()   Benjamin Herrenschmidt
• [PATCH 02/12] powermac: support G5 CPU hotplug   Benjamin Herrenschmidt
• [PATCH 02/12] powermac: support G5 CPU hotplug   Benjamin Herrenschmidt
• [PATCH] Added QE to the list of default scanned OF devices   Benjamin Herrenschmidt
• [PATCH] Celleb: improve htab lock   Benjamin Herrenschmidt
• [PATCH] Celleb: improve htab lock   Benjamin Herrenschmidt
• [linux-pm] [PATCH 02/12] powermac: support G5 CPU hotplug   Benjamin Herrenschmidt
• [PATCH] Added QE to the list of default scanned OF devices   Benjamin Herrenschmidt
• [PATCH 1/2] Added support for the MPC8568E MDS board   Benjamin Herrenschmidt
• [Cbe-oss-dev] [PATCH 3/3] spufs: remove need for struct page for SPEs   Benjamin Herrenschmidt
• [PATCH 0/2] spufs: mmap fixes and updates   Benjamin Herrenschmidt
• [PATCH 1/2] spufs: remove need for struct page for SPEs   Benjamin Herrenschmidt
• [PATCH 2/2] spufs: Fix bitrot of the SPU mmap facility   Benjamin Herrenschmidt
• [PATCH] spufs: Fix bitrot of the SPU mmap facility (#2)   Benjamin Herrenschmidt
• [PATCH] Celleb: improve htab lock   Benjamin Herrenschmidt
• Discussion about iopa()   Benjamin Herrenschmidt
• Discussion about iopa()   Benjamin Herrenschmidt
• Discussion about iopa()   Benjamin Herrenschmidt
• Discussion about iopa()   Benjamin Herrenschmidt
• Discussion about iopa()   Benjamin Herrenschmidt
• [PATCH] powerpc: Fix vDSO page count calculation   Benjamin Herrenschmidt
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Benjamin Herrenschmidt
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Benjamin Herrenschmidt
• [PATCH] ppc: Add support for AMCC Taishan 440GX eval board   Benjamin Herrenschmidt
• [PATCH 01/10] powerpc/serial: Dispose irq mapping when done in mpc52xx_serial.c   Benjamin Herrenschmidt
• [PATCH 02/10] powerpc: Add device tree fixups for the EFIKA   Benjamin Herrenschmidt
• [PATCH 02/10] powerpc: Add device tree fixups for the EFIKA   Benjamin Herrenschmidt
• [PATCH 02/10] powerpc: Add device tree fixups for the EFIKA   Benjamin Herrenschmidt
• [PATCH 0/4] spidernet: support for Celleb   Benjamin Herrenschmidt
• [PATCH 0/3] spufs: mmap fixes and updates   Benjamin Herrenschmidt
• [PATCH 1/3] spufs: remove need for struct page for SPEs   Benjamin Herrenschmidt
• [PATCH 2/3] powerpc: Remove SPU struct page's for PS3   Benjamin Herrenschmidt
• [PATCH 3/3] spufs: Fix bitrot of the SPU mmap facility   Benjamin Herrenschmidt
• [PATCH 2/16] More DCR native fixups   Benjamin Herrenschmidt
• [PATCH 3/16] [powerpc] Use udbg_early_init() on ppc32   Benjamin Herrenschmidt
• [PATCH 6/16] Port 44x MMU definitions to ARCH=powerpc   Benjamin Herrenschmidt
• [PATCH 4/16] powerpc: Allow duplicate lmb_reserve() calls   Benjamin Herrenschmidt
• [PATCH 6/16] Port 44x MMU definitions to ARCH=powerpc   Benjamin Herrenschmidt
• [RFC] mpc5200 device tree bindings refinement   Benjamin Herrenschmidt
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Benjamin Herrenschmidt
• [PATCH] powerpc: add of_get_mac_address() and update fsl_soc.c to use it   Benjamin Herrenschmidt
• USB Host controller for MPC8548e board   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Benjamin Herrenschmidt
• [PATCH] powerpc: add of_get_mac_address() and update fsl_soc.c to use it   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Benjamin Herrenschmidt
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Benjamin Herrenschmidt
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Benjamin Herrenschmidt
• [PATCH] celleb: fix CONFIG_KEXEC dependency   Benjamin Herrenschmidt
• [PATCH] celleb: fix scc_uhc.c dependency   Benjamin Herrenschmidt
• [PATCH] ps3: don't call ps3_system_bus_driver_register on other platforms   Benjamin Herrenschmidt
• undefined symbol 'PS3_PS3AV'   Benjamin Herrenschmidt
• [linux-pm] [PATCH 02/12] powermac: support G5 CPU hotplug   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTS files   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• spidernet (was Re: [PATCHSET] libata: PATA driver for Celleb)   Benjamin Herrenschmidt
• [RFC/PATCH] powerpc: introduce "slices" (aka. meta-segments)   Benjamin Herrenschmidt
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• [RFC/PATCH] powerpc: introduce "slices" (aka. meta-segments)   Benjamin Herrenschmidt
• [PATCH 15/16] Add device tree for Ebony   Benjamin Herrenschmidt
• [patch 1/4] ps3fb: thread updates   Benjamin Herrenschmidt
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Benjamin Herrenschmidt
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   Benjamin Herrenschmidt
• purpose of /chosen node (was RE: [PATCH] powerpc: delete boot-cpu and chosen nodes from all DTSfiles)   Benjamin Herrenschmidt
• [PATCH] use winbond libata instead of ide driver for pseries CD drives   Benjamin Herrenschmidt
• [PATCH 2.6.21-rc1] powerpc: Make of_device_uevent() compatible with ibmebus   Benjamin Herrenschmidt
• [PATCH 2.6.21-rc1] powerpc: Make of_device_uevent() compatible with ibmebus   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH 2.6.21-rc1] powerpc: Make of_device_uevent() compatible with ibmebus   Benjamin Herrenschmidt
• [RFC 3/3] zImage: Exception vector support   Benjamin Herrenschmidt
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   Benjamin Herrenschmidt
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   Benjamin Herrenschmidt
• macros and dtc   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   Benjamin Herrenschmidt
• [RFC 3/3] zImage: Exception vector support   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• [PATCHSET] libata: PATA driver for Celleb   Benjamin Herrenschmidt
• [PATCH 0/5] Support 64K pages mapping of SPE local stores on 4K kernel   Benjamin Herrenschmidt
• [PATCH 1/5] powerpc: Fix spu SLB invalidations   Benjamin Herrenschmidt
• [PATCH 2/5] This is a hack to get_unmapped_area to make the SPE 64K code work.   Benjamin Herrenschmidt
• [PATCH 3/5] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH 4/5] powerpc: Add ability to 4K kernel to hash in 64K pages   Benjamin Herrenschmidt
• [PATCH 5/5] powerpc: spufs support for 64K LS mappings on 4K kernels   Benjamin Herrenschmidt
• Front LED on Mac mini G4   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [PATCH] powerpc: Introduce address space "slices"   Benjamin Herrenschmidt
• [RFC 3/3] zImage: Exception vector support   Benjamin Herrenschmidt
• [RFC 3/3] zImage: Exception vector support   Benjamin Herrenschmidt
• [PATCH] powerpc: document new interrupt-array property   Benjamin Herrenschmidt
• [PATCH] powerpc: document new interrupt-array property   Benjamin Herrenschmidt
• [PATCH] powerpc: document new interrupt-array property   Benjamin Herrenschmidt
• [PATCH] powerpc: document new interrupt-array property   Benjamin Herrenschmidt
• Update on: MPC85xx git/MPC8548cds - PCI/PCIE problemS with Marvel SATA driver...   Benjamin Herrenschmidt
• Make sure we populate the initroot filesystem late enough   Benjamin Herrenschmidt
• Make sure we populate the initroot filesystem late enough   Benjamin Herrenschmidt
• [PATCH] powerpc: Remove some redunant isync instructions   Benjamin Herrenschmidt
• [PATCH] ehea: NAPI multi queue TX/RX path for SMP   Benjamin Herrenschmidt
• Make sure we populate the initroot filesystem late enough   Benjamin Herrenschmidt
• Make sure we populate the initroot filesystem late enough   Benjamin Herrenschmidt
• #cpus property   Benjamin Herrenschmidt
• Possible ppc64 (and maybe others ?) mm problem   Benjamin Herrenschmidt
• [PATCH] powerpc: document new interrupt-array property   Benjamin Herrenschmidt
• Make sure we populate the initroot filesystem late enough   Benjamin Herrenschmidt
• 2.6.20 zImage.prep??   Sebastian Heutling
• Make sure we populate the initroot filesystem late enough   William Lee Irwin III
• Mpc875 Ethernet does not work under linux.   Cem Vedat ISIK
• Mpc875 Ethernet does not work under linux.   Cem Vedat ISIK
• mpc875 support in 2.4.34 kernel   Cem Vedat ISIK
• [PATCH] Celleb: improve htab lock   Akira Iguchi
• [PATCH] Celleb: improve htab lock   Akira Iguchi
• [PATCHSET] libata: PATA driver for Celleb   Akira Iguchi
• [Alsa-devel] [PATCH] snd-aoa: fix onyx resume   Takashi Iwai
• [PATCH] aoa i2sbus: Stop Apple i2s DMA gracefully   Takashi Iwai
• [PATCH] [0/9] PA Semi patches   Olof Johansson
• [PATCH] [1/9] pasemi: Default root device   Olof Johansson
• [PATCH] [2/9] pasemi: UART udbg support   Olof Johansson
• [PATCH] [3/9] pasemi: Machine check handler   Olof Johansson
• [PATCH] [4/9] pasemi: Idle loops   Olof Johansson
• [PATCH] [5/9] pasemi: Implement restart   Olof Johansson
• [PATCH] [6/9] pasemi: SMP timebase sync   Olof Johansson
• [PATCH] [7/9] pasemi: Configure DMA controller interrupts   Olof Johansson
• [PATCH] [8/9] pasemi: iommu support   Olof Johansson
• [PATCH] [9/9] pasemi: defconfig   Olof Johansson
• [PATCH] [5/9] pasemi: Implement restart   Olof Johansson
• [PATCH] [1/9] pasemi: Default root device   Olof Johansson
• [PATCH] [4/9] pasemi: Idle loops   Olof Johansson
• [PATCH] [v2] [0/8] PA Semi patches   Olof Johansson
• [PATCH] [v2] [1/8] pasemi: UART udbg support   Olof Johansson
• [PATCH] [v2] [2/8] pasemi: Machine check handler   Olof Johansson
• [PATCH] [v2] [3/8] pasemi: Idle loops   Olof Johansson
• [PATCH] [v2] [4/8] pasemi: Implement restart   Olof Johansson
• [PATCH] [v2] [5/8] pasemi: SMP timebase sync   Olof Johansson
• [PATCH] [v2] [6/8] pasemi: Configure DMA controller interrupts   Olof Johansson
• [PATCH] [v2] [7/8] pasemi: iommu support   Olof Johansson
• [PATCH] [v2] [8/8] pasemi: defconfig   Olof Johansson
• [PATCH] [1/9] pasemi: Default root device   Olof Johansson
• [PATCH] [3/9] pasemi: Machine check handler   Olof Johansson
• [PATCH] [7/9] pasemi: Configure DMA controller interrupts   Olof Johansson
• [RFC 08/10] powerpc: dart iommu suspend   Olof Johansson
• [PATCH] Update udbg_progress() to display the integer   Olof Johansson
• [PATCH] [v2] [3/8] pasemi: Idle loops   Olof Johansson
• [PATCH] generic RTC support for PPC   Olof Johansson
• [PATCH] generic RTC support for PPC   Olof Johansson
• [PATCH] Update udbg_progress() to display the integer   Olof Johansson
• patches in powerpc.git   Olof Johansson
• patches in powerpc.git   Olof Johansson
• [PATCH]Enabling Auto poweron after power is restored.   Olof Johansson
• [PATCH] powerpc: add of_get_mac_address() and update fsl_soc.c to use it   Olof Johansson
• [DTC PATCH] Add support for decimal, octal and binary based cell values.   Olof Johansson
• [RFC 5/7] Unite all PCI-e on 85xx and 86xx under one codebase   Olof Johansson
• [PATCH] powerpc: Introduce address space "slices"   Olof Johansson
• [PATCH] powerpc: Introduce address space "slices"   Olof Johansson
• Update on: MPC85xx git/MPC8548cds - PCI/PCIE problemS with Marvel SATA driver...   Olof Johansson
• Update on: MPC85xx git/MPC8548cds - PCI/PCIE problemS with Marvel SATA driver...   Olof Johansson
• [PATCH] No DEEPNAP on 970MP 1.0   Olof Johansson
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH 4/4] Add support to OProfile for profiling Cell BE SPUs -- update   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [Cbe-oss-dev] [RFC, PATCH] CELL Oprofile SPU profiling updated patch   Maynard Johnson
• [RFC/PATCH 4/16] Abstract MSI suspend   Greg KH
• [PATCH 0/6] MSI portability cleanups   Greg KH
• USB Host controller for MPC8548e board   Michael Kelly
• USB Host controller for MPC8548e board   Michael Kelly
• USB Host controller for MPC8548e board   Michael Kelly
• [PATCH 1/3] pci: New PCI-E reset API   Brian King
• [PATCH 2/3] powerpc: Add powerpc PCI-E reset API implementation   Brian King
• [PATCH 3/3] ipr: Use PCI-E reset API for new ipr adapter   Brian King
• [PATCH 1/3] pci: New PCI-E reset API   Brian King
• [PATCH 1/3] pci: New PCI-E reset API   Brian King
• [PATCH 1/3] pci: New PCI-E reset API   Brian King
• [PATCH 2/3] powerpc: Add powerpc PCI-E reset API implementation   Brian King
• [PATCH 3/3] ipr: Use PCI-E reset API for new ipr adapter   Brian King
• I don't understand #size-cells = <0>   Andrew Klossner
• [Cbe-oss-dev] spidernet: dynamic phy setup code   Ishizaki Kou
• [PATCH 0/11] Patches for Toshiba Cell reference set   Ishizaki Kou
• [PATCH 1/11] Celleb: interfaces to the hypervisor   Ishizaki Kou
• [PATCH 2/11] Celleb: support interrupts   Ishizaki Kou
• [PATCH 3/11] Celleb: setup usb host controller in SCC   Ishizaki Kou
• [PATCH 4/11] Celleb: support iommu   Ishizaki Kou
• [PATCH 5/11] Celleb: htab routines   Ishizaki Kou
• [PATCH 6/11] Celleb: support udbg   Ishizaki Kou
• [PATCH 7/11] Celleb: hypervisor console driver   Ishizaki Kou
• [PATCH 8/11] Celleb: consolidate spu management ops   Ishizaki Kou
• [PATCH 9/11] Celleb: support spu priv1 ops   Ishizaki Kou
• [PATCH 10/11] Celleb: basic support   Ishizaki Kou
• [PATCH 11/11] Celleb: add celleb_defconfig   Ishizaki Kou
• spidernet: dynamic phy setup code   Ishizaki Kou
• [RFC/PATCH 2.6.20-rc6 1/4] spidernet: autoneg support for Celleb   Ishizaki Kou
• [RFC/PATCH 2.6.20-rc6 2/4] spidernet: load firmaware when open   Ishizaki Kou
• [RFC/PATCH 2.6.20-rc6 3/4] spidernet: add support for Celleb   Ishizaki Kou
• [RFC/PATCH 2.6.20-rc6 4/4] spidernet: remove txram full logging   Ishizaki Kou
• spidernet: dynamic phy setup code   Ishizaki Kou
• [PATCH 0/11] Patches for Toshiba Cell reference set   Ishizaki Kou
• Revised: [PATCH 5/11] Celleb: htab routines   Ishizaki Kou
• [PATCH 0/4] spidernet: support for Celleb   Ishizaki Kou
• [PATCH 1/4] spidernet: autoneg support for Celleb   Ishizaki Kou
• [PATCH 2/4] spidernet: load firmware when open   Ishizaki Kou
• [PATCH 3/4] spidernet: spidernet: add support for Celleb   Ishizaki Kou
• [PATCH 4/4] spidernet: remove txram full logging   Ishizaki Kou
• [PATCH] spidernet : fix memory leak in spider_net_stop   Ishizaki Kou
• [PATCH] Celleb: improve htab lock   Ishizaki Kou
• [PATCH 10/11] Celleb: basic support   Ishizaki Kou
• [PATCH] celleb: fix CONFIG_KEXEC dependency   Ishizaki Kou
• [PATCH] celleb: fix scc_uhc.c dependency   Ishizaki Kou
• [PATCH] ps3: don't call ps3_system_bus_driver_register on other platforms   Ishizaki Kou
• [PATCH 0/4] spidernet: support for Celleb   Ishizaki Kou
• [PATCH 0/4] spidernet: support for Celleb   Ishizaki Kou
• [PATCH 1/4] spidernet: autoneg support for Celleb   Ishizaki Kou
• [PATCH 2/4] spidernet: load firmware when open   Ishizaki Kou
• [PATCH 3/4] spidernet: spidernet: add support for Celleb   Ishizaki Kou
• [PATCH 4/4] spidernet: remove txram full logging   Ishizaki Kou
• [patch 0/1] pmi: initial version   Christian Krafft
• [patch 1/1] pmi: initial version   Christian Krafft
• [patch 1/1] pmi: initial version   Christian Krafft
• [Cbe-oss-dev] [patch v2] pmi: initial version   Christian Krafft
• [Cbe-oss-dev] [patch v3] pmi: initial version   Christian Krafft
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Christian Krafft
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Christian Krafft
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Christian Krafft
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Christian Krafft
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Christian Krafft
• [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade   Christian Krafft
• [patch] ipmi: check, if default ports are accessible on PPC   Christian Krafft
• [PATCH 2/10] ps3: AV Settings Driver Library   Geoff Levand
• [PATCH] [1/9] pasemi: Default root device   Geoff Levand
• [PATCH 3/4] PS3: Fix DMA scatter-gather   Geoff Levand
• [PATCH 1/3] PS3: Vuart cleanups   Geoff Levand
• [PATCH 2/3] PS3: Vuart add async read   Geoff Levand
• [PATCH 3/3] PS3: System manager support   Geoff Levand
• [PATCH 3/3] PS3: System manager support   Geoff Levand
• [PATCH 3/3] PS3: System manager support   Geoff Levand
• [PATCH 3/3] PS3: System manager support   Geoff Levand
• [PATCH 3/3 v2] PS3: System manager support   Geoff Levand
• [PATCH] ps3 usb missed the addition of new argument to ps3_alloc_io_irq()   Geoff Levand
• [PATCH] ps3: missing exports   Geoff Levand
• [PATCH] ps3 usb missed the addition of new argument to ps3_alloc_io_irq()   Geoff Levand
• Okay to change default zImage link/load address?   Geoff Levand
• vdso error   Geoff Levand
• Okay to change default zImage link/load address?   Geoff Levand
• [PATCH 19/19] bootwrapper: compatibility layer for old U-Boots (a.k.a. cuImage, cuboot)   Geoff Levand
• [PATCH 11/16] zImage wrapper for Ebony   Geoff Levand
• [PATCH 19/19] bootwrapper: compatibility layer for old U-Boots (a.k.a. cuImage, cuboot)   Geoff Levand
• [PATCH 1/3 v2] PS3: Vuart cleanups   Geoff Levand
• [PATCH] ps3: don't call ps3_system_bus_driver_register on other platforms   Geoff Levand
• [0/3] RFC: Cleanups and improvements to the zImage wrapper   Geoff Levand
• Time to put bootwrapper patches into powerpc.git?   Geoff Levand
• [RFC 1/3] zImage: Add signed types   Geoff Levand
• [RFC 2/3] zImage: SMP hold   Geoff Levand
• [RFC 3/3] zImage: Exception vector support   Geoff Levand
• [PATCH 2/3] zImage: Cleanup and improve prep_kernel()   Geoff Levand
• [PATCH 3/3] zImage: Cleanup and improve zImage entry point   Geoff Levand