bjking1@kastria:~> ssh honda Elapsed time since release of system processors: 1 mins 21 secs Config file read, 1080 bytes Welcome to yaboot version 1.3.11.SuSE Enter "help" to get some basic usage information boot: git Please wait, loading kernel... Elf64 kernel loaded... Loading ramdisk... ramdisk loaded at 04200000, size: 1400 Kbytes OF stdout device is: /pci@400000000110/isa@3/serial@i3f8 command line: root=/dev/disk/by-id/SIBM_ST336732LC_3ET0D0NZ00007237T4S9p3 selinux=0 elevator=cfq xmon=on memory layout at init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom : 000000000435e000 alloc_top : 0000000030000000 alloc_top_hi : 0000000040000000 rmo_top : 0000000030000000 ram_top : 0000000040000000 Looking for displays opening PHB /pci@400000000110... done opening PHB /pci@400000000111... done instantiating rtas at 0x000000002fd13000 ... done 0000000000000000 : boot cpu 0000000000000000 copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x000000000465f000 -> 0x00000000046601ec Device tree struct 0x0000000004661000 -> 0x0000000004668000 Calling quiesce ... returning from prom_init Page orders: linear mapping = 24, others = 12 Found initrd at 0xc000000004200000:0xc00000000435e000 Starting Linux PPC64 #5 SMP Fri Dec 2 10:41:05 CST 2005 ----------------------------------------------------- ppc64_pft_size = 0x0 ppc64_interrupt_controller = 0x2 platform = 0x100 physicalMemorySize = 0x40000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc00000003e000000 htab_hash_mask = 0x1ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.15-rc4-gdeda4987 (root@hondapreg) (gcc version 3.3.3 (SuSE Linux)) #5 SMP Fri Dec 2 10:41:05 CST 2005 [boot]0012 Setup Arch Node 0 Memory: 0x0-0x40000000 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 81920 bytes Using default idle loop [boot]0015 Setup Done Built 1 zonelists Kernel command line: root=/dev/disk/by-id/SIBM_ST336732LC_3ET0D0NZ00007237T4S9p3 selinux=0 elevator=cfq xmon=on [boot]0020 XICS Init [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 124.997400 MHz time_init: processor frequency = 1000.000000 MHz Page orders: linear mapping = 24, others = 12 Found initrd at 0xc000000004200000:0xc00000000435e000 Starting Linux PPC64 #5 SMP Fri Dec 2 10:41:05 CST 2005 ----------------------------------------------------- ppc64_pft_size = 0x0 ppc64_interrupt_controller = 0x2 platform = 0x100 physicalMemorySize = 0x40000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc00000003e000000 htab_hash_mask = 0x1ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.15-rc4-gdeda4987 (root@hondapreg) (gcc version 3.3.3 (SuSE Linux)) #5 SMP Fri Dec 2 10:41:05 CST 2005 [boot]0012 Setup Arch Node 0 Memory: 0x0-0x40000000 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 81920 bytes Using default idle loop [boot]0015 Setup Done Built 1 zonelists Kernel command line: root=/dev/disk/by-id/SIBM_ST336732LC_3ET0D0NZ00007237T4S9p3 selinux=0 elevator=cfq xmon=on [boot]0020 XICS Init [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 124.997400 MHz time_init: processor frequency = 1000.000000 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) freeing bootmem node 0 Memory: 982600k/1048576k available (4560k kernel code, 65976k reserved, 1480k data, 892k bss, 236k init) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1400k freed NET: Registered protocol family 16 PCI: Probing PCI hardware Failed to request PCI IO region on PCI domain 0000 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,4 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,6 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/ide@3,1 Using INTC for W82c105 IDE controller. IOMMU table initialized, virtual merging disabled EEH: event on unsupported device, rc=0 dn=/pci@400000000111/pci@2 EEH: event on unsupported device, rc=0 dn=/pci@400000000111/pci@2,2 EEH: event on unsupported device, rc=0 dn=/pci@400000000111/pci@2,3 EEH: event on unsupported device, rc=0 dn=/pci@400000000111/pci@2,4 EEH: event on unsupported device, rc=0 dn=/pci@400000000111/pci@2,6 ISA bridge at 0000:00:03.0 mapping IO 3fd30000000 -> d000080000000000, size: 100000 mapping IO 3fd40000000 -> d000080000100000, size: 100000 PCI: Probing PCI hardware done RTAS daemon started audit: initializing netlink socket (disabled) audit(1133542215.523:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpadlpar_io_init: partition not DLPAR capable HVSI: registered 0 devices Generic RTC Driver v1.07 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250.0: ttyS2 at I/O 0x898 (irq = 10) is a 16550A Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller at PCI slot 0000:00:03.1 W82C105: chipset revision 5 W82C105: 100% native mode on irq 181 ide0: BM-DMA at 0xf040-0xf047, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf048-0xf04f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM DROM00205, ATAPI CD/DVD-ROM drive hda: selected PIO 4 (120ns) (0240) ide0 at 0xf000-0xf007,0xf012 on irq 181 ide-cd: cmd 0x5a timed out hda: lost interrupt ide-cd: cmd 0x5a timed out hda: lost interrupt ide-cd: cmd 0x5a timed out hda: lost interrupt hda: ATAPI 24X DVD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.20 hda: lost interrupt ide-cd: cmd 0x3 timed out hda: lost interrupt