<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">Hi ,<br><br><br>I have a PQ2FADS-VR board with 2.4.26 kernel running well on it which came with Metrworks PCS BSP pacakge and now I am trying to upgrade it to 2.6.25 version by using ltib and enabling PQ2FADS support in the kernel. I got the kernel built successfully and when I try to load it onto the board which has u-boot-1.3.2 version in 8 M FLASH SIMM i encounter the following error.<br><br><tt>tftpboot 400000 uImage</tt><br>
<tt>[snip]</tt><br>
<tt>Bytes transferred = 1624909 (18cb4d hex)</tt><br>
<tt>=> tftpboot 800000 pq2fads.dtb</tt><br>
<tt>[snip]</tt><br>
<tt>Bytes transferred = 12288 (3000 hex)</tt><br>
<tt>=> bootm 400000 - 800000</tt><br>
<tt>## Booting image at 00400000 ...</tt><br>
<tt> Image Name: Linux-2.6.25</tt><br>
<tt> Image Type: PowerPC Linux Kernel Image (gzip compressed)</tt><br>
<tt> Data Size: 1624845 Bytes = 1.5 MB</tt><br>
<tt> Load Address: 00000000</tt><br>
<tt> Entry Point: 00000000</tt><br>
<tt> Verifying Checksum ... OK</tt><br>
<tt> Uncompressing Kernel Image ... OK</tt><br>
<tt> Booting using the fdt at 0x800000</tt><br>
<tt> Loading Device Tree to 007fc000, end 007fefff ... OK</tt><br>
<br>
<tt>And Then it stops. The board doesn't print anything else.</tt>
Can anyone please help me to whats going on and to what I need to enable to see some debug info on the serial port ( minicom in my case ). <br><br>P.S : I did enable all the early level debugging in the kernel but yet I dont see anything on the console.<br><br>Any help is greatly appreciated.<br><br>Thanks in advance<br><br>Regards<br>Jyotshna<br><br></td></tr></table><br>