/ { model = "EP8248E"; compatible = "fsl,ep8248e"; #address-cells = <1>; #size-cells = <1>; aliases { planetcore-SMC1 = &smc1; planetcore-SCC1 = &scc1; ethernet0 = ð0; ethernet1 = ð1; serial0 = &smc1; serial1 = &scc1; }; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8248@0 { device_type = "cpu"; reg = <0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <16384>; i-cache-size = <16384>; timebase-frequency = <0>; clock-frequency = <0>; }; }; localbus { compatible = "fsl,mpc8248-localbus", "fsl,pq2-localbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; reg = <0xe0010100 0x40>; ranges = <0 0 0xf8000000 0x08000000 4 0 0xf0000000 0x08000000 2 0 0xe4000000 0x00008000 5 0 0xe4100000 0x00008000 6 0 0xe4200000 0x00008000>; flash@0,0 { compatible = "cfi-flash"; reg = <0 0x0 0x08000000>; bank-width = <4>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; fs@0 { label ="RootFS"; reg = <0 0x7c00000>; /*read-only;*/ }; kernel@7d00000 { label ="Linux Kernel"; reg = <0x7c00000 0x300000>; }; firmware@7f00000 { label ="u-boot"; reg = <0x7f00000 0x80000>; }; firmware@7f80000 { label ="empty"; reg = <0x7f80000 0x80000>; }; }; flash@4,0 { compatible = "cfi-flash"; reg = <4 0 0x08000000>; bank-width = <4>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; config@0 { label ="28 MB Config"; reg = <0x0 0x1c00000>; }; root@1c00000 { label ="36 MB Config"; reg = <0x1c00000 0x2400000>; }; fs@4000000 { label ="64MB MB"; reg = <0x4000000 0x4000000>; }; }; dualcsr@6,0 { #address-cells = <2>; #size-cells = <1>; reg = <6 0 2>; compatible = "fsl,ep8248e-dualcsr"; ranges; }; dpram@5,0 { #address-cells = <2>; #size-cells = <1>; reg = <5 0 320>; compatible = "fsl,ep8248e-dpram"; ranges; }; bcsr@2,0 { #address-cells = <2>; #size-cells = <1>; reg = <2 0 0x14>; compatible = "fsl,ep8248e-bcsr"; ranges; mdio { device_type = "mdio"; compatible = "fsl,ep8248e-mdio-bitbang"; #address-cells = <1>; #size-cells = <0>; reg = <0 8 1>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; reg = <0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; reg = <1>; device_type = "ethernet-phy"; }; }; }; timer1 { name = "timer1"; compatible = "vtm,timer1"; interrupts = <0xc 8>; interrupt-parent = <&PIC>; }; timer2 { name = "timer2"; compatible = "vtm,timer2"; interrupts = <0xd 8>; interrupt-parent = <&PIC>; }; timer3 { name = "timer3"; compatible = "vtm,timer3"; interrupts = <0xe 8>; interrupt-parent = <&PIC>; }; timer4 { name = "timer4"; compatible = "vtm,timer4"; interrupts = <0xf 8>; interrupt-parent = <&PIC>; }; irq4 { name = "irq4"; compatible = "vtm,arinc"; interrupts = <0x16 8>; interrupt-parent = <&PIC>; }; irq5 { name = "irq5"; compatible = "vtm,printheadcomplete"; interrupts = <0x17 8>; interrupt-parent = <&PIC>; }; irq6 { name = "irq6"; compatible = "vtm,statuschange"; interrupts = <0x18 8>; interrupt-parent = <&PIC>; }; i2c-thermal@34 { compatible = "vtm,i2c-thermister"; reg = <0x34 0 0>; interrupts = <>; interrupt-parent = <>; }; i2c-led@34 { compatible = "vtm,i2c-led"; reg = <0x41 0 0>; interrupts = <>; interrupt-parent = <>; }; i2c-eeprom@54 { compatible = "vtm,i2c-eeprom"; reg = <0x54 0 0>; interrupts = <>; interrupt-parent = <>; }; }; memory { device_type = "memory"; reg = <0 0>; }; soc@e0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; ranges = <0x00000000 0xe0000000 0x00053000>; // Temporary until code stops depending on it. device_type = "soc"; // Temporary -- will go away once kernel uses ranges for get_immrbase(). reg = <0xe0000000 0x00053000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; compatible = "fsl,mpc8248-cpm", "fsl,cpm2", "simple-bus"; reg = <0x119c0 0x30>; ranges; muram { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; reg = <0x80 0x1f80 0x9800 0x800>; }; }; brg@119f0 { compatible = "fsl,mpc8248-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; reg = <0x119f0 0x10 0x115f0 0x10>; }; /* Monitor port/SMC1 */ smc1: serial@11a80 { device_type = "serial"; compatible = "fsl,mpc8248-smc-uart", "fsl,cpm2-smc-uart"; reg = <0x11a80 0x20 0x87fc 2>; interrupts = <4 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <7>; fsl,cpm-command = <0x1d000000>; }; /* "Serial" port/SCC1 */ scc1: serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8248-scc-uart", "fsl,cpm2-scc-uart"; reg = <0x11a00 0x20 0x8000 0x100>; interrupts = <0x40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <0x00800000>; }; /* "Serial" port/SCC4 */ scc1: serial@11a60 { device_type = "serial"; compatible = "fsl,mpc8248-scc-uart", "fsl,cpm2-scc-uart"; reg = <0x11a60 0x20 0x8300 0x100>; interrupts = <0x2B 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <4>; fsl,cpm-command = <0x0CE00000>; }; eth0: ethernet@11300 { device_type = "network"; compatible = "fsl,mpc8248-fcc-enet", "fsl,cpm2-fcc-enet"; reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x20 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; fsl,cpm-command = <0x12000300>; }; eth1: ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8248-fcc-enet", "fsl,cpm2-fcc-enet"; reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x21 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; fsl,cpm-command = <0x16200300>; }; usb@11b60 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc8248-usb", "fsl,cpm2-usb"; reg = <0x11b60 0x18 0x8b00 0x100>; interrupt-parent = <&PIC>; interrupts = <0xb 8>; fsl,cpm-command = <0x2e600000>; }; i2c@11860 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc8248-i2c", "fsl,cpm2-i2c"; reg = <0x11860 0x20 0x8afc 0x2>; interrupts = <1 8>; interrupt-parent = <&PIC>; fsl,cpm-command = <0x29600000>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; reg = <0x10c00 0x80>; compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; }; }; chosen { linux,stdout-path = "/soc/cpm/serial@11a80"; }; };