<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16608" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I''ve ported u-boot-1.1.1 sucessfully on my
IBM STBx25xx rewood6 platform (ppc405 core). Earlier in the ppcboot I used
to load the zImage.treeboot directly via the bootloader and it used to relocate
and run. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>But with u-boot which image I should use and
which address I should load the image. My board has 64 MB of RAM and out of
which 32 MB is mapped at 0x0000000 and another 32MB is mapped at 0xA0000000. The
U-boot code is located at 0x1fe2000 in RAM.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Also is there any 2.6 kernel source supporting
redwood6 IBM STBx25xx platform.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanx in advance.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Regards,</FONT></DIV>
<DIV><FONT face=Arial size=2>Akhilesh</FONT></DIV></BODY></HTML>