<br><font size=2 face="sans-serif">Hi All,</font>
<br><font size=2 face="sans-serif"> We have a custom target
board based on PPC-EP405. We just got the board from the hardware team
.I connected the board to BDI200 and powered it on. </font>
<br><font size=2 face="sans-serif">The control came to the resetvec address
which is 0xfffffffc. I was able to read and write to flash. So I erased
the flash and burnt the bootloader into flash from 0xfffc0000.</font>
<br><font size=2 face="sans-serif">I verified that the instruction at 0xfffffffc
is <b>4bfc2104 </b>whicis actually a branch to 0xfffc2100. Also a memory
dump of 0xfffc2100 shows the correct code. This proved that</font>
<br><font size=2 face="sans-serif">the uboot bootloader was burnt properly.</font>
<br><font size=2 face="sans-serif">Now when I reset the board the control
never reaches 0xfffc2100 i.e for some reason the code at the resetvec is
not getting executed. Any help or pointers to resolve this is greatly appreciated.</font>
<br><font size=2 face="sans-serif">Thanks,<br>
</font><font size=2>Ravishankar Govindarao<br>
RFL Electronics Inc.<br>
E-mail</font><font size=1> </font><font size=2>: </font><a href=mailto:Ravi.Rao@rflelect.com><font size=2 color=blue><u>Ravi.Rao@rflelect.com</u></font></a>
<br><font size=2>Voice: 973.334.3100 Ext. 233<br>
Fax: 973.334.3863</font>
<p><font size=2> </font>
<div align=center>
<br><font size=2 color=blue><u>CONFIDENTIALITY NOTE</u></font></div>
<br><font size=1>This e-mail, including any attachments, may contain confidential
and/or legally privileged information. The Information is intended
only for the use of the individual or entity named on this e-mail</font><font size=1>
</font><font size=1>. If you are not the intended recipient, you
are hereby notified that any disclosure, copying, distribution, or the
taking of any action in reliance on the contents of this transmitted Information
is strictly prohibited. Further, if you are not the intended recipient,
please notify us by return e-mail and delete the Information promptly.</font>
<p><font size=2> </font>
<p><font size=2> </font>
<p><font size=3> </font>