TFTP from server 10.10.2.24 our IP address is 10.10.14.5 Filename 'kernel-aspmppc440-linux-2.6.10'. Load address: 0xc000000 Loading: ################################################################# ################################################################# ################################################################# #################################################### done Bytes transferred = 1260746 (133cca hex) ## Booting image at 0c000000 ... Image Name: Linux-2.6.10-pmppc440 Created: 2007-09-18 19:28:50 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1260682 Bytes = 1231 kB = 1 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.6.10-pmppc440 (randy@fred) (gcc version 3.3.3 (DENX ELDK 3.1 3.3 .3-8)) #2 Tue Sep 18 19:28:48 GMT 2007 Artesyn PmPPC440 Copyright 2006, Artesyn Communication Products, Inc. Built 1 zonelists Kernel command line: rw ip=on PID hash table entries: 4096 (order: 12, 65536 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 516480k available (1844k kernel code, 648k data, 324k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Cannot allocate resource region 5 of device 0000:00:06.0 PCI: Failed to allocate mem resource #5:100@a0000000 for 0000:00:06.0 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing enabled ttyS0 at MMIO 0x0 (irq = 0) is a 16550A ttyS1 at MMIO 0x0 (irq = 1) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.5.4-k2 Copyright (c) 1999-2004 Intel Corporation. mal0: Initialized, 4 tx channels, 2 rx channels emac: IBM EMAC Ethernet driver, version 2.0 Maintained by Benjamin Herrenschmidt zmii0: input 0 in RMII mode eth0: IBM emac, MAC 00:80:f9:69:0b:1f eth0: Found Generic MII PHY (0x04) zmii0: input 1 in RMII mode eth1: IBM emac, MAC 00:80:f9:69:08:1f eth1: Found Generic MII PHY (0x05) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SiI680: IDE controller at PCI slot 0000:00:06.0 SiI680: chipset revision 2 siimage: IDE controller MMIO ports not available. SiI680: BASE CLOCK == 100 SiI680: 100% native mode on irq 25 ide0: BM-DMA at 0xffd0-0xffd7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffd8-0xffdf, BIOS settings: hdc:pio, hdd:pio hda: HTS424040M9AT00, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0xfff8-0xffff,0xfff6 on irq 25 eth0: Link is Up eth0: Speed: 100, Full duplex. hda: max request size: 64KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 PmPPC440 flash: Found 1 x16 devices at 0x0 in 16-bit bank PmPPC440 flash: Found 1 x16 devices at 0x1000000 in 16-bit bank PmPPC440 flash: Found 1 x16 devices at 0x2000000 in 16-bit bank PmPPC440 flash: Found 1 x16 devices at 0x3000000 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 5 MTD partitions on "PmPPC440 flash": 0x00000000-0x01d80000 : "Primary Filesystem" 0x01d80000-0x02000000 : "Primary Kernel" 0x02000000-0x03d80000 : "Secondary Filesystem" 0x03d80000-0x03f00000 : "Secondary Kernel" 0x03f00000-0x04000000 : "U-Boot (Reserved)" mice: PS/2 mouse device common for all mice i2c /dev entries driver IBM IIC driver v2.1 ibm-iic0: using standard (100 kHz) mode ibm-iic1: using standard (100 kHz) mode NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 eth0: Link is Up eth0: Speed: 100, Full duplex. Sending BOOTP requests . OK IP-Config: Got BOOTP answer from 10.10.2.24, my address is 10.10.14.5 IP-Config: Gateway not on directly connected network. Looking up port of RPC 100003/2 on 10.10.2.24 Looking up port of RPC 100005/1 on 10.10.2.24 VFS: Mounted root (nfs filesystem). Mounted devfs on /dev Freeing unused kernel memory: 324k init INIT: version 2.84 booting Welcome to DENX Embedded Linux Environment Press 'I' to enter interactive startup. Building the cache [ OK ] Mounting proc filesystem: [ OK ] Configuring kernel parameters: [ OK ] Setting clock : Tue Sep 18 14:47:08 EDT 2007 [ OK ] Setting hostname gsr-fileserver5: [ OK ] Activating swap partitions: [ OK ] Checking filesystems [ OK ] Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Initializing random number generator: [ OK ] Starting portmapper: [ OK ] Mounting NFS filesystems: [ OK ] Mounting other filesystems: [ OK ] Starting xinetd: [ OK ] gsr-fileserver5 login: root Last login: Mon Sep 17 20:37:51 on console bash-2.05b# lspci -v 00:02.0 Class 0680: 3388:0021 (rev 04) Subsystem: 1223:003a Flags: bus master, stepping, 66Mhz, medium devsel, latency 128, IRQ 25 Memory at 80000000 (32-bit, prefetchable) [size=512M] Capabilities: [dc] Power Management version 4 Capabilities: [e4] #06 [0094] Capabilities: [e8] Vital Product Data 00:06.0 Class 0101: 1095:0680 (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: 1095:0680 Flags: bus master, medium devsel, latency 128, IRQ 25 I/O ports at fff8 [size=8] I/O ports at fff4 [size=4] I/O ports at ffe8 [size=8] I/O ports at ffe4 [size=4] I/O ports at ffd0 [size=16] Memory at a0000000 (32-bit, non-prefetchable) Expansion ROM at a0080000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 bash-2.05b# mount /dev/ide/host0/bus0/target0/lun0/part3 x bash-2.05b# ls x bin boot etc images lib lost+found mnt proc root sbin tmp usr var bash-2.05b# mount /dev/ide/host0/bus0/target0/lun0/part1 y Oops: kernel access of bad area, sig: 11 [#1] NIP: C0003804 LR: C00081B0 SP: DE8A3AF0 REGS: de8a3a40 TRAP: 0300 Not tainted MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 DAR: E0000000, DSISR: 00800000 TASK = dfe9ae20[336] 'mount' THREAD: de8a2000 Last syscall: 21 PLB0: bear= 0x00000000 acr= 0x9b000000 besr= 0x00000000 GPR00: C00082B4 DE8A3AF0 DFE9AE20 E0000000 07FFFFE0 0000001F 00000002 C02A0000 GPR08: 00000000 1FB44000 00000000 C02A0000 00000001 1002863C 1FFA8600 100C0000 GPR16: 00000000 00000000 100D0888 100C2A88 00000001 C02A0000 00029000 00000001 GPR24: 00000002 00000400 00000000 FFFFFC00 DE8A2000 DFB44800 C06BF880 FFFFFC00 NIP [c0003804] invalidate_dcache_range+0x1c/0x30 LR [c00081b0] __dma_sync+0x54/0x60 Call trace: [c00082b4] __dma_sync_page+0xf8/0x19c [c01467c0] ide_build_sglist+0xa8/0xf8 [c0146840] ide_build_dmatable+0x30/0x1ac [c0146d64] ide_dma_setup+0x3c/0xc8 [c0148ee4] __ide_do_rw_disk+0x2b8/0x598 [c013e0f0] start_request+0x190/0x280 [c013e438] ide_do_request+0x238/0x3d8 [c011711c] __generic_unplug_device+0x68/0x6c [c011713c] generic_unplug_device+0x1c/0x38 [c0117190] blk_backing_dev_unplug+0x38/0x3c [c0056a68] sync_buffer+0x64/0x68 [c01ca8c4] __wait_on_bit+0xb0/0xc0 [c01ca934] out_of_line_wait_on_bit+0x60/0x74 [c0056b30] __wait_on_buffer+0x3c/0x40 [c0058560] __bread_slow+0xac/0xd4 note: mount[336] exited with preempt_count 1 Oops: kernel access of bad area, sig: 11 [#2] NIP: C007C7B4 LR: C007CB0C SP: DFDD5E80 REGS: dfdd5dd0 TRAP: 0300 Not tainted MSR: 00029000 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00 DAR: 00000094, DSISR: 00000000 TASK = c07d0720[7] 'pdflush' THREAD: dfdd4000 Last syscall: -1 PLB0: bear= 0x00000000 acr= 0x9b000000 besr= 0x00000000 GPR00: A0000000 DFDD5E80 C07D0720 DFFD2000 DFDD5F00 00000000 000001F4 00000BB8 GPR08: 00000004 20000000 00000400 00000004 00005B8A 00000000 1FFA8600 007FFF08 GPR16: 00000000 00000001 007FFF00 FFFFFFFF 1FFA3428 00000000 C0250000 FFFC615D GPR24: C02A0000 C02A0000 DFFD2074 DFFD207C DFDD5F00 C0250000 FFFFFFFC DFFD2000 NIP [c007c7b4] sync_sb_inodes+0x54/0x2a4 LR [c007cb0c] writeback_inodes+0x108/0x120 Call trace: [c007cb0c] writeback_inodes+0x108/0x120 [c0038f48] wb_kupdate+0xe4/0x168 [c0039c30] __pdflush+0x120/0x1e4 [c0039d14] pdflush+0x20/0x30 [c002bd44] kthread+0xb4/0xbc [c0003bec] kernel_thread+0x44/0x60 Segmentation fault bash-2.05b#