<DIV>Hi,</DIV> <DIV> </DIV> <DIV>I am using linux kernel 2.6.17.1 on ML403 dev board. I am trying to get the TEMAC to work but with no success. I applied TEMAC patches from <A href="http://source.mvista.com/~ank/paulus-powerpc/20060309/" target=_blank rel=nofollow _><FONT color=#003399>http://source.mvista.com/~ank/paulus-powerpc/20060309/</FONT></A>. But the ethernet interface does not seem to come up. <BR></DIV> <DIV>Is there any other TEMAC patch out there which is known to work with 2.6 kernel? </DIV> <DIV> </DIV> <DIV>For the BSP I tried using the ML403 EDK Embedded PowerPC reference design from Xilinx. But it doesn't come with a PLB TEMAC in the design. I also tried to use xapp902 which has the PLB TEMAC module. But on running "Generate Libraries and BSPs" it does not generate any sources code under "drivers" or "arch" folder.</DIV> <DIV> </DIV> <DIV>-Pradeep</DIV> <DIV> </DIV> <DIV>I have attached the boot up logs from the
hyper-terminal.<BR>loaded at: 00400000 0051913C<BR>board data at: 00517124 0051713C<BR>relocated to: 004050E0 004050F8<BR>zimage at: 004057F5 00516F4D<BR>avail ram: 0051A000 10000000</DIV> <DIV>Linux/PPC load: console=ttyS0,9600 root=/dev/xsa2</DIV> <DIV>Uncompressing Linux...done.<BR>Now booting the kernel<BR>[ 0.000000] Linux version 2.6.17.1 (<A href="http://us.f832.mail.yahoo.com/ym/Compose?To=psampath@psampath-test" target=_blank rel=nofollow _><FONT color=#003399>psampath@psampath-test</FONT></A>) (gcc version 3.4.<BR>1) #5 Sun Oct 22 10:25:16 PDT 2006<BR>[ 0.000000] Xilinx ML403 Reference System (Virtex-4 FX)<BR>[ 0.000000] Built 1 zonelists<BR>[ 0.000000] Kernel command line: console=ttyS0,9600 root=/dev/xsa2<BR>[ 0.000000] Xilinx INTC #0 at 0xD1000FC0 mapped to 0xFDFFEFC0<BR>[
0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)<BR>[ 0.000183] Console: colour dummy device 80x25<BR>[ 0.001962] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)<BR>[ 0.005114] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)<BR>[ 0.060120] Memory: 257280k available (1808k kernel code, 616k data, 84k init<BR>, 0k highmem)<BR>[ 0.248262] Security Framework v1.0.0 initialized<BR>[ 0.248328] SELinux: Disabled at boot.<BR>[ 0.248481] Mount-cache hash table entries: 512<BR>[ 0.254057] NET: Registered protocol family 16<BR>[ 0.262730] NET: Registered protocol family 2<BR>[ 0.316488] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)<BR>[ 0.317422] TCP established hash table entries: 8192 (order: 3, 32768
bytes)<BR>[ 0.317970] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)<BR>[ 0.318284] TCP: Hash tables configured (established 8192 bind 4096)<BR>[ 0.318320] TCP reno registered<BR>[ 0.325013] audit: initializing netlink socket (disabled)<BR>[ 0.325150] audit(0.324:1): initialized<BR>[ 0.326666] VFS: Disk quotas dquot_6.5.1<BR>[ 0.326910] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<BR>[ 0.327817] Initializing Cryptographic API<BR>[ 0.327891] io scheduler noop registered<BR>[ 0.328088] io scheduler anticipatory registered (default)<BR>[ 0.328173] io scheduler deadline registered<BR>[ 0.328345] io scheduler cfq registered<BR>[ 0.946309] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing<BR>enabled<BR>[ 0.955054] serial8250.0: ttyS0 at MMIO 0xa0001003 (irq = 9) is a 16450<BR>[ 3.002532] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc<BR>ksize<BR>[ 3.093986] xsa: xsa1 xsa2<BR>[ 3.138222] i8042.c: No controller found.<BR>[ 3.186302] TCP bic registered<BR>[ 3.222088] NET: Registered protocol family 8<BR>[ 3.274064] NET: Registered protocol family 20</DIV> <DIV>[ 3.336810] EXT3-fs: INFO: recovery required on readonly filesystem.<BR>[ 3.412076] EXT3-fs: write access will be enabled during recovery.<BR>[ 3.717927] kjournald starting. Commit interval 5 seconds<BR>[ 3.782937] EXT3-fs: recovery complete.<BR>[ 3.870012] EXT3-fs: mounted filesystem with ordered data mode.<BR>[ 3.940755] VFS: Mounted
root (ext3 filesystem) readonly.<BR>[ 4.004944] Freeing unused kernel memory: 84k init<BR>INIT: version 2.78 booting<BR>Activating swap...<BR>/etc/init.d/rcS: /dev/null: Read-only file system<BR>[ 9.866081] EXT3-fs warning: mounting unchecked fs, running e2fsck is recomme<BR>nded<BR>[ 9.957819] EXT3 FS on xsa2, internal journal<BR>Checking all file systems...<BR>fsck 1.27 (8-Mar-2002)<BR>Calculating module dependencies... depmod: QM_MODULES: Function not implemented</DIV> <DIV>done.<BR>Loading modules:<BR>modprobe: Can't open dependencies file /lib/modules/2.6.17.1/modules.dep (No suc<BR>h file or directory)<BR>Mounting local filesystems...<BR>nothing was mounted<BR>Cleaning: /etc/network/ifstate.<BR>Setting up IP spoofing protection: rp_filter.<BR>Disable TCP/IP Explicit Congestion Notification: done.<BR>Configuring network interfaces: done.<BR>Starting portmap daemon: portmap.<BR>Starting dhcpcd on eth0<BR>Running
ntpdate to synchronize clock.<BR>Cleaning: /tmp /var/lock /var/runfind: ./syslogd.pid: Input/output error<BR>find: ./syslogd.pid: Input/output error<BR>find: ./inetd.pid: Input/output error<BR>find: ./inetd.pid: Input/output error<BR>dhcpcd[734]: dhcpStart: socket: Address family not supported by protocol</DIV> <DIV>.</DIV> <DIV>sed: can't read /etc/motd: Input/output error<BR>INIT: Entering runlevel: 3': Input/output<BR>Starting kernel log daemon: klogd.<BR>Starting system log daemon: syslogd</DIV> <DIV>Starting web server: apache.<BR>Starting internet superserver: inetdstart-stop-daemon: open pidfile /var/run/ine<BR>td.pid: Input/output error<BR>.<BR>Hostname: ml403.<BR>Creating barrier for shutdown<BR>Starting X11 session for user 'linux'<BR>PAM_unix[966]: (su) session opened for user linux by (uid=0)<BR>Welcome to the ML403 Evaluation Board<BR>(C) 2004 Xilinx, I<BR>MontaVista(R) Linux(R) Professional Edition 3.1</DIV> <DIV>ml403 login: root<BR>PAM-securetty[988]:
Couldn't open /etc/securetty<BR>Password:<BR>PAM_unix[988]: (login) session opened for user root by LOGIN(uid=0)<BR>Last login: Thu Jan 1 00:16:05 1970 on console<BR>login[988]: ROOT LOGIN on `console'</DIV> <DIV><A href="http://us.f832.mail.yahoo.com/ym/Compose?To=root@ml403" target=_blank rel=nofollow _><FONT color=#003399>root@ml403</FONT></A>:~#</DIV>