<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=921420821-23082006><FONT face=Arial size=2>Hey guys,<BR><BR>I 
have a development board based loosely off the MPC8540ADS design that I am 
trying to move to the Linux kernel 2.6. I already have this system working 
successfully in Linux Kernel 2.4, but after dealing with compilation and load 
errors, i've come to the point where I can get to a console. However, this 
problem at boot time keeps me from using&nbsp;a&nbsp;lot of onboard hardware. 
When I enable PCI support in the Kernel configuration, this is the text I get at 
boot time...<BR><BR>PCI: Probing PCI hardware<BR>PCI: Cannot allocate resource 
region 1 of PCI bridge 1<BR>PCI: Cannot allocate resource region 2 of PCI bridge 
1<BR>PCI: bridge 1 resource 2 moved to 9ff00000..9fffffff<BR>PCI: Cannot 
allocate resource region 1 of PCI bridge 2<BR>PCI: Cannot allocate resource 
region 2 of PCI bridge 2<BR>PCI: bridge 2 resource 2 moved to 
9fe00000..9fefffff<BR>PCI: Cannot allocate resource region 1 of device 
0000:00:14.0<BR>PCI: Cannot allocate resource region 2 of device 
0000:00:14.0<BR>PCI: Cannot allocate resource region 0 of device 
0000:01:01.0<BR>PCI: Cannot allocate resource region 1 of device 
0000:01:01.0<BR>PCI: Cannot allocate resource region 2 of device 
0000:01:01.0<BR>PCI: Cannot allocate resource region 0 of device 
0000:01:05.0<BR>PCI: Cannot allocate resource region 1 of device 
0000:01:05.0<BR>PCI: Cannot allocate resource region 2 of device 
0000:01:05.0<BR>PCI: Cannot allocate resource region 0 of device 
0000:01:06.0<BR>PCI: Cannot allocate resource region 0 of device 
0000:01:06.1<BR>PCI: Cannot allocate resource region 0 of device 
0000:01:06.2<BR>PCI: Failed to allocate mem resource #0:1000000@0 for 
0000:01:01.0<BR>PCI: Failed to allocate I/O resource #1:100@1000 for 
0000:01:01.0<BR>PCI: Failed to allocate mem resource #2:1000@0 for 
0000:01:01.0<BR>PCI: Failed to allocate mem resource #0:10000@0 for 
0000:01:05.0<BR>PCI: Failed to allocate mem resource #2:10000@0 for 
0000:01:05.0<BR>PCI: Failed to allocate mem resource #0:1000@0 for 
0000:01:06.0<BR>PCI: Failed to allocate mem resource #0:1000@0 for 
0000:01:06.1<BR>PCI: Failed to allocate mem resource #0:100@0 for 
0000:01:06.2</FONT></SPAN></DIV>
<DIV><SPAN class=921420821-23082006><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=921420821-23082006><FONT face=Arial size=2>the system is using 
a PLX PCI bridge chip. Like I said, this works fine in my 2.4 distribution. 
Thanks for any and all help!</FONT></SPAN></DIV>
<DIV>&nbsp;</DIV>
<DIV align=left><FONT face=Arial size=2>Clinton 
Thomas<BR>cthomas@soneticom.com</FONT></DIV>
<DIV>&nbsp;</DIV></BODY></HTML>