######## For 2.6.11.7 kernel from Freescale ################## U-Boot 1.1.3 (Freescale) (May 17 2006 - 08:00:07) CPU: MPC5200 v2.2 at 396 MHz Bus 132 MHz, IPB 132 MHz, PCI 33 MHz Board: Freescale MPC5200 (Lite5200B) I2C: 85 kHz, ready DRAM: 64 MB Top of RAM usable for U-Boot at: 04000000 Reserving 524k for U-Boot at: 03f7c000 Reserving 191k for malloc() at: 03f4c008 Reserving 68 Bytes for Board Info at: 03f4bfc4 Reserving 56 Bytes for Global Data at: 03f4bf8c Stack Pointer at: 03f4bf68 New Stack Pointer is: 03f4bf68 Now running in RAM - U-Boot at: 03f7c000 FLASH: Flash does not respond to CFI commands flash_protect ON: from 0xFF000000 to 0xFF038FFF protect on 0 protect on 1 protect on 2 protect on 3 flash_protect ON: from 0xFF040000 to 0xFF04FFF7 protect on 4 16 MB basetask = 0, tasks = 2 task_org = 0x03fb3000 TDT start = 0x00000040, end = 0x000001b8 U-Boot : Doing PCI Initialization for MPC5200B PCI: Bus Dev VenId DevId Class Int PCI: Bus Dev VenId DevId Class Int PCI Scan: Found Bus 0, Device 24, Function 0 00 18 1057 5809 0680 00 PCI Scan: Found Bus 0, Device 26, Function 0 PCI Scan: Found Bus 1, Device 8, Function 0 01 08 104c 9065 ff00 00 00 1a 104c ac23 0604 ff In: serial Out: serial Err: serial U-Boot relocated to 03f7c000 ### main_loop entered: bootdelay=5 ### main_loop: bootcmd="run nfsargs addip;tftp 1000000 /tftpboot/uImage;bootm 1000000" Hit any key to stop autoboot: 5  4  3  2  1  0 Net: mpc5xxx_fec_init_phy... Begin mpc5xxx_fec_init_phy... Done FEC ETHERNET Trying FEC ETHERNET mpc5xxx_fec_init... Begin mpc5xxx_fec_init_phy_complete... Begin mpc5xxx_fec_init_phy_complete... Done mpc5xxx_fec_init... Done Using FEC ETHERNET device TFTP from server 10.50.40.203; our IP address is 10.50.40.201 Filename '/tftpboot/uImage'. Load address: 0x1000000 Loading: ############################################################################ ############################################################################ ############################################################################ ############################################################################ ############################################################################ ##################################### Bytes transferred = 1471170 (1672c2 hex) Ethernet task stopped ## Booting image at 01000000 ... Image Name: Linux-2.6.11.7 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1471106 Bytes = 1.4 MB Load Address: 00000000 Entry Point: 00000000 Uncompressing Kernel Image ... OK ## Current stack ends at 0x03F4BBB8 => set upper limit to 0x00800000 ## cmdline at 0x007FFF00 ... 0x007FFF9E bd address = 0x03F4BFC4 memstart = 0x00000000 memsize = 0x04000000 flashstart = 0xFF000000 flashsize = 0x01000000 flashoffset = 0x00039000 sramstart = 0x00000000 sramsize = 0x00000000 bootflags = 0x00000001 intfreq = 396 MHz busfreq = 132 MHz ethaddr = 00:04:9F:AA:BB:CC IP addr = 10.50.40.201 baudrate = 115200 bps No initrd ## Transferring control to Linux (at address 00000000) ... Linux version 2.6.11.7 (root@localname) (gcc version 3.3.2) #25 Tue Jul 11 12:00:47 UTC 2006 mpc52xx_find_bridges: isa_io_base = ef000000 mpc52xx_find_bridges: cfg_addr = 0 PCI Autoconfig: Found P2P bridge, device 26 Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/nfs nfsroot=10.50.40.203:/tftpboot/5200B_test/rootfsdir ip=10.50.40.201:10.50.40.203:10.50.40.1:255.255.248.0::eth0:off panic=1 PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61568k available (2292k kernel code, 840k data, 140k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. softirq RT prio: 24. desched cpu_callback 2/00000000 desched thread 0 started up. NET: Registered protocol family 16 PCI: Probing PCI hardware ******** In pcibios_fixup_resources ******** VendorId: 1057, DevId: 5809 For 1: res->start = 80000000, res->end = bfffffff ******** In pcibios_fixup_resources ******** VendorId: 104c, DevId: ac23 ******** In pcibios_fixup_resources ******** VendorId: 104c, DevId: 9065 For 0: res->start = 7fc00000, res->end = 7fffffff For 1: res->start = 7f000000, res->end = 7f7fffff For 2: res->start = f003fff0, res->end = f003ffff pci_read_bridge_base: VendorId: 104c, DevId = ac23 Bus Res Start = f003f000, Bus Res End = f003ffff Bus Res Start = 7f000000, Bus Res End = 7fffffff Bus Res Start = 7ef00000, Bus Res End = 7effffff Bus Res Start = 0, Bus Res End = 0 PCI: bridge rsrc 0..ffffff (100), parent c02a290c PCI: bridge rsrc 40000000..4fffffff (200), parent c02a2928 PCI: bridge rsrc f003f000..f003ffff (101), parent 00000000 PCI: Cannot allocate resource region 0 of PCI bridge 1 PCI: bridge 1 resource 0 moved to fff000..ffffff PCI: bridge rsrc 7f000000..7fffffff (200), parent 00000000 PCI: Cannot allocate resource region 1 of PCI bridge 1 PCI: bridge 1 resource 1 moved to 4f000000..4fffffff PCI: bridge rsrc 7ef00000..7effffff (1200), parent 00000000 PCI: Cannot allocate resource region 2 of PCI bridge 1 PCI: bridge 1 resource 2 moved to 4ef00000..4effffff SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. ppdev: user-space parallel port driver Serial: MPC52xx PSC driver ttyS0 at MMIO 0xf0002000 (irq = 39) is a MPC52xx PSC io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx mpc52xx_ide: Setting up IDE interface ide0... ocp-ohci 02: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c-algo-52xx.o: scanning bus Lite5200 I2C module #1 interface... ................................................................................................................................ i2c-lite5200.o: I2C module #1 installed i2c-algo-52xx.o: scanning bus Lite5200 I2C module #2 interface... ...............................................................................................................................(0x7f) i2c-lite5200.o: I2C module #2 installed Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 usb 1-1: new full speed USB device using ocp-ohci and address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected eth0: Phy @ 0x0, type LXT971 (0x001378e2) IP-Config: Complete: device=eth0, addr=10.50.40.201, mask=255.255.248.0, gw=10.50.40.1, host=10.50.40.201, domain=, nis-domain=(none), bootserver=10.50.40.203, rootserver=10.50.40.203, rootpath= Looking up port of RPC 100003/2 on 10.50.40.203 Looking up port of RPC 100005/1 on 10.50.40.203 VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 140k init Setting hostname hostname: /etc/hostname: No such file or directory Setting Date Wed Sep 10 00:00:00 GMT 2003 Mounting proc Remounting rootfs r/w Mounting sysfs *** Running rc.modules *** Running rc.serial *** Attempting to start S15inet Starting inetd Done *** Attempting to start S20network Setting up link for loopback Done Setting up link for eth0 SIOCSIFNETMASK: Invalid argument RTNETLINK answers: File exists FAILED *** Attempting to start S23portmap Starting rpc.portmap Done *** Attempting to start S30ftp Starting in.ftpd Done *** Attempting to start S30vsftpd Starting vsftpd Done *** Attempting to start S90boa bind: Address already in use *** Running rc.local 10.50.40.201 login: root login[47]: root login on `ttyS0' # # # # # cat /proc/bus/pci/devices 00c0 10575809 0 40000000 00000000 00000000 00000000 00000000 00000000 00000000 00040000 00000000 00000000 00000000 00000000 00000000 00000000 00d0 104cac23 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0140 104c9065 0 4f000008 4f800000 00fff001 00000000 00000000 00000000 00000000 00400000 00800000 00000010 00000000 00000000 00000000 00000000 #