<div>Hi All,</div>  <div>I build uboot1.1.4 for&nbsp;ocotea_config&nbsp; and run on an ocotea without SPD on DIMMS (SDRAM) and &nbsp;It works. We manufactured another board derived from Ocotea Ref design, 440GX processor and on baord SDRAM (DIMMS) 256MB discrete parts. I use the same Uboot1.1.4 for this board. It boots upto calling the </div>  <div>&nbsp;</div>  <div>relocate_code in cpu/ppc4xx/start.S and hangs. The same code works well on Ocotea. I run the memory tests and it passed all.</div>  <div>&nbsp;</div>  <div>Any idea why this could hang and never finish the relocate_code function. Trying relocating Uboot to SDRAM memory to get the C environment and run from memory.</div>  <div>&nbsp;</div>  <div>Any help would be appreciated. Any idea if i need any special code because of the discrete parts of SDRAM on our board.</div>  <div>&nbsp;</div>  <div>Thanks,</div>  <div>Pravin</div>  <div>&nbsp;</div>