<DIV id=RTEContent> <DIV id=RTEContent> We are trying to port Linux-2.6.13 on Custom build board, We gone through some of the threads and done those modifications for initializing the console. But it was not working. We are sending the output data and config file.</DIV> <DIV id=RTEContent> </DIV> <DIV id=RTEContent><BR>U-Boot 1.0.2 (Oct 13 2005 - 10:06:32)</DIV> <DIV id=RTEContent>CPU: XPC86xxxZPnnD3 at 60 MHz: 4 kB I-Cache 4 kB D-Cache FEC present<BR>Board: FADS with db MPC860T rev ENG<BR>DRAM: (64 MB SDRAM) unknown dramdelay (0x1) - defaulting to 70 ns64 MB<BR>ok1<BR>ok2<BR>functions are over<BR>Top of RAM usable for U-Boot at: 04000000<BR>Reserving 141k for U-Boot at: 03fdc000<BR>Reserving 640k for malloc() at: 03f3c000<BR>Reserving 60 Bytes for Board Info at: 03f3bfc4<BR>Reserving 48 Bytes for Global Data at: 03f3bf94<BR>Stack Pointer at: 03f3bf78<BR>New Stack Pointer is: 03f3bf78</DIV> <DIV id=RTEContent>memcopy over<BR>Now running
in RAM - U-Boot at: 03fdc000<BR>FLASH:<BR>in flash_get_size micron is identified ffff<BR>device id in flash.c 18<BR>device id correct</DIV> <DIV id=RTEContent>in flash_get_size micron is identified 1<BR>device id in flash.c 18<BR>device id correct<BR>32 MB<BR>In: serial<BR>Out: serial<BR>Err: serial<BR>KGDB: [on SMC2] kgdb ready<BR>ready<BR>Net: FEC ETHERNET<BR>ent into mainloop<BR>Hit any key to stop autoboot: 0<BR>=>loadb 0x100000 57600<BR>## Ready for binary (kermit) download to 0x00100000 at 57600 bps...<BR>## Total Size = 0x000e9e5d = 958045 Bytes<BR>## Start Addr = 0x00100000<BR>=>loadb 0x400000 57600<BR>## Ready for binary (kermit) download to 0x00400000 at 57600 bps...<BR>## Total Size = 0x0039c124 = 3784996 Bytes<BR>## Start
Addr = 0x00400000<BR>=>bootm 0x100000 0x400000<BR>## Booting image at 00100000 ...<BR> Image Name: Linux-2.6.13<BR> Image Type: PowerPC Linux Kernel Image (gzip compressed)<BR> Data Size: 957981 Bytes = 935.5 kB<BR> Load Address: 00000000<BR> Entry Point: 00000000<BR> Verifying Checksum ... OK<BR> Uncompressing Kernel Image ... gunzip function called<BR>OK<BR>do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux before RAM<BR> Disk image loading ...<BR>## Loading RAMDisk Image at 00400000 ...<BR> Image Name: Ramdisk image<BR> Image Type: PowerPC Linux RAMDisk Image (gzip compressed)<BR> Data Size: 3784932 Bytes = 3.6 MB<BR> Load Address: 00000000<BR> Entry Point:
00000000<BR> Verifying Checksum ... OK<BR>data is non zero<BR> Loading Ramdisk to 03b9f000, end 03f3b0e4 ... OK<BR>## Transferring control to Linux (at address 00000000) ...<BR></DIV></DIV><p>
                <hr size=1>Yahoo! Shopping<br>
Find Great Deals on Holiday Gifts at <a href="http://us.rd.yahoo.com/mail_us/footer/shopping/*http://shopping.yahoo.com/;_ylc=X3oDMTE2bzVzaHJtBF9TAzk1OTQ5NjM2BHNlYwNtYWlsdGFnBHNsawNob2xpZGF5LTA1
">Yahoo! Shopping</a>