<div><BR>We are seinding the details of porting Linux on MPC860T. </div> <div>Initially we have enabled all the SMC/SCC devices these are conflicting with the console, the boot loader argument was wrong( connsole=ttyS1,57600 console=tty1 root=/dev/ram),and we have enabled CONFIG_VT. </div> <div>Modifications :</div> <div>We have selected only SMC2, and changed the boot loader argument to connsole=ttyCPM2,57600 root=/dev/ram , and modified the drivers/char/Kconfig file</div> <div><BR>( original lines )</div> <div>config VT</div> <div>bool "Virtual terminal" if EMBEDDED</div> <div>select INPUT</div> <div>default y if !VIOCONS </div> <div> </div> <div>( Modified lines )</div> <div><BR>config VT</div> <div>bool "Virtual terminal" if EMBEDDED</div> <div>select INPUT</div> <div>default n</div> <div> </div> <div>These are the only modifications we have done to the config and Kconfig files.</div> <div> <BR>Thanks <BR>Venakta jagadeesh.p</div> <div>> Hi
Sinan Akman<BR>> <BR>> Thanks for Your suggestion, Now linux is up and <BR>> booting. thanks for the community who contributed in this >porting.</div> <div><BR>> I am glad it worked. I guess my reply to you didn't go >through <BR>>to <BR>>linuxppc-embedded.<BR>>You might want to post the sequence of things you tried, what >worked <BR>>and <BR>>what didn't. This<BR>>way someone else can find it through search, assuming it >wasn't in the <BR>>FAQ already.</div> <div> > Regards</div> <div>> Sinan Akman</div> <div>> <BR>> Thanks and one and all,<BR>> Venkata jagadish.p<BR>></div> <div><BR>Sinan Akman <<A href="mailto:sinan@writeme.com">sinan@writeme.com</A>> wrote:<BR>Date: Thu, 29 Dec 2005 02:51:42 -0500<BR>From: Sinan Akman <<A
href="mailto:sinan@writeme.com">sinan@writeme.com</A>><BR>To: venkatajagadeesh p <<A href="mailto:cpvjagadeesh@yahoo.com">cpvjagadeesh@yahoo.com</A>><BR>Subject: Re: Porting Linux2.6.13 on MPC860T custom build board</div> <div>venkatajagadeesh p wrote:</div> <div>> venkatajagadeesh p wrote:<BR>> >/<BR>> />/ Hi,<BR>> />/ We are trying to port Linux-2.6.13 on Custom build MPC860T, <BR>> board,<BR>> />/ We are unable to see any messages on console. We got the output given<BR>> />/ below. Please help us in porting the kernel.<BR>> />/ I am attaching the config file .<BR>> />/ <BR>> />/ =>bootm 0x100000<BR>> />/ ## Booting image at 00100000 ...<BR>> />/ Image Name: Linux-2.6.13<BR>> />/ Image Type: PowerPC Linux Kernel Image (gzip compressed)<BR>> />/ Data Size: 958189 Bytes = 935.7 kB<BR>> />/ Load Address: 00000000<BR>> />/ Entry Point: 00000000<BR>> />/ Verifying Checksum ...
OK<BR>> />/ Uncompressing Kernel Image ... gunzip function called<BR>> />/ OK<BR>> />/ do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux<BR>> />/ before RAM<BR>> />/ Disk image loading ...<BR>> />/ No initrd<BR>> />/ ## Transferring control to Linux (at address 00000000) ...<BR>> />/<BR>> /> >Most probably, something odd with serial setup.<BR>> > >You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)<BR>> >>they can hardly live together, having alternative - conflicting IO <BR>> pin configurations.<BR>> <BR>> We enabling only SMC2, still it is showing the same problem. In U-boot <BR>> loader we have modified the default console to SMC2. We have not done <BR>> any modifications to the original linux-2.6.13 code.<BR>> <BR>> I am sending config file as an attachment.</div> <div><BR>Try unsetting VT_CONSOLE. That is, uncheck "Support for console on
<BR>virtual terminal" in<BR>Character Devices. It looks like your console output is directed to a <BR>VT. You might also<BR>want to specify console=ttyCPM2 in your bootloader argument.</div> <div>Hope this helps</div> <div>-- sinan</div> <div>> <BR>> I am sending U-boot env varibles also<BR>><BR>> =>printenv<BR>> bootcmd=bootm;setenv bootargs root=/dev/ram rw<BR>> bootdelay=5<BR>> baudrate=57600<BR>> loads_echo=1<BR>> ethaddr=9a:52:63:15:85:25<BR>> bootfile=uImage<BR>> filesize=95f0a<BR>> ipaddr=192.168.3.2<BR>> serverip=192.168.3.6<BR>> netdev=eth0<BR>> netmask=255.255.255.0<BR>> addip=setenv bootargs ${bootargs} <BR>> ip=${ipaddr}:${serverip}:${gatewayip}:${netmas<BR>> k}:${hostname}:${netdev}:off<BR>> ramargs=setenv bootargs root=/dev/ram rw<BR>> kernel_addr=0xfc0a0000<BR>> ramdisk_addr=0xfc160000<BR>> flash_ram=run ramargs addip;bootm 0xfc0a0000 0xfc160000<BR>> net_ram=tftpboot 0x100000 uImage;tftpboot
0x400000 rambb2;run ramargs <BR>> addip;boot<BR>> m 0x100000 0x400000<BR>> stdin=serial<BR>> stdout=serial<BR>> stderr=serial<BR>> bootargs=root=/dev/ram rw<BR>> Environment size: 638/262140 bytes<BR>> <BR>> <BR>><BR>> ------------------------------------------------------------------------<BR>> Yahoo! Photos<BR>> Ring in the New Year with Photo Calendars <BR>> . <BR>> Add photos, events, holidays, whatever.<BR>><BR>>------------------------------------------------------------------------<BR>><BR>>#<BR>># Automatically generated make config: don't edit<BR>># Linux kernel version: 2.6.13<BR>># Thu Dec 29 10:54:14
2005<BR>>#<BR>>CONFIG_MMU=y<BR>>CONFIG_GENERIC_HARDIRQS=y<BR>>CONFIG_RWSEM_XCHGADD_ALGORITHM=y<BR>>CONFIG_GENERIC_CALIBRATE_DELAY=y<BR>>CONFIG_HAVE_DEC_LOCK=y<BR>>CONFIG_PPC=y<BR>>CONFIG_PPC32=y<BR>>CONFIG_GENERIC_NVRAM=y<BR>>CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y<BR>><BR>>#<BR>># Code maturity level options<BR>>#<BR>>CONFIG_EXPERIMENTAL=y<BR>>CONFIG_CLEAN_COMPILE=y<BR>>CONFIG_BROKEN_ON_SMP=y<BR>>CONFIG_INIT_ENV_ARG_LIMIT=32<BR>><BR>>#<BR>># General setup<BR>>#<BR>>CONFIG_LOCALVERSION=""<BR>># CONFIG_SWAP is not set<BR>>CONFIG_SYSVIPC=y<BR>># CONFIG_POSIX_MQUEUE is not set<BR>># CONFIG_BSD_PROCESS_ACCT is not set<BR>>CONFIG_SYSCTL=y<BR>># CONFIG_AUDIT is not set<BR>># CONFIG_HOTPLUG is not set<BR>>CONFIG_KOBJECT_UEVENT=y<BR>># CONFIG_IKCONFIG is not set<BR>># CONFIG_EMBEDDED is not set<BR>>CONFIG_KALLSYMS=y<BR>># CONFIG_KALLSYMS_EXTRA_PASS is not
set<BR>>CONFIG_PRINTK=y<BR>>CONFIG_BUG=y<BR>>CONFIG_BASE_FULL=y<BR>>CONFIG_FUTEX=y<BR>>CONFIG_EPOLL=y<BR>>CONFIG_SHMEM=y<BR>>CONFIG_CC_ALIGN_FUNCTIONS=0<BR>>CONFIG_CC_ALIGN_LABELS=0<BR>>CONFIG_CC_ALIGN_LOOPS=0<BR>>CONFIG_CC_ALIGN_JUMPS=0<BR>># CONFIG_TINY_SHMEM is not set<BR>>CONFIG_BASE_SMALL=0<BR>><BR>>#<BR>># Loadable module support<BR>>#<BR>># CONFIG_MODULES is not set<BR>><BR>>#<BR>># Processor<BR>>#<BR>># CONFIG_6xx is not set<BR>># CONFIG_40x is not set<BR>># CONFIG_44x is not set<BR>># CONFIG_POWER3 is not set<BR>># CONFIG_POWER4 is not set<BR>>CONFIG_8xx=y<BR>># CONFIG_E200 is not set<BR>># CONFIG_E500 is not set<BR>># CONFIG_MATH_EMULATION is not set<BR>># CONFIG_KEXEC is not set<BR>># CONFIG_CPU_FREQ is not set<BR>># CONFIG_WANT_EARLY_SERIAL is not set<BR>>CONFIG_EMBEDDEDBOOT=y<BR>>CONFIG_NOT_COHERENT_CACHE=y<BR>><BR>>#<BR>># Platform
options<BR>>#<BR>>CONFIG_FADS=y<BR>># CONFIG_RPXLITE is not set<BR>># CONFIG_RPXCLASSIC is not set<BR>># CONFIG_BSEIP is not set<BR>>CONFIG_MPC8XXFADS=y<BR>># CONFIG_MPC86XADS is not set<BR>># CONFIG_MPC885ADS is not set<BR>># CONFIG_TQM823L is not set<BR>># CONFIG_TQM850L is not set<BR>># CONFIG_TQM855L is not set<BR>># CONFIG_TQM860L is not set<BR>># CONFIG_FPS850L is not set<BR>># CONFIG_SPD823TS is not set<BR>># CONFIG_IVMS8 is not set<BR>># CONFIG_IVML24 is not set<BR>># CONFIG_SM850 is not set<BR>># CONFIG_HERMES_PRO is not set<BR>># CONFIG_IP860 is not set<BR>># CONFIG_LWMON is not set<BR>># CONFIG_PCU_E is not set<BR>># CONFIG_CCM is not set<BR>># CONFIG_LANTEC is not set<BR>># CONFIG_MBX is not set<BR>># CONFIG_WINCEPT is not set<BR>># CONFIG_HIGHMEM is not set<BR>>CONFIG_HZ_100=y<BR>># CONFIG_HZ_250 is not set<BR>># CONFIG_HZ_1000 is not
set<BR>>CONFIG_HZ=100<BR>>CONFIG_PREEMPT_NONE=y<BR>># CONFIG_PREEMPT_VOLUNTARY is not set<BR>># CONFIG_PREEMPT is not set<BR>>CONFIG_SELECT_MEMORY_MODEL=y<BR>>CONFIG_FLATMEM_MANUAL=y<BR>># CONFIG_DISCONTIGMEM_MANUAL is not set<BR>># CONFIG_SPARSEMEM_MANUAL is not set<BR>>CONFIG_FLATMEM=y<BR>>CONFIG_FLAT_NODE_MEM_MAP=y<BR>>CONFIG_BINFMT_ELF=y<BR>># CONFIG_BINFMT_MISC is not set<BR>>CONFIG_CMDLINE_BOOL=y<BR>>CONFIG_CMDLINE="console=ttyS1,57600 console=tty1 root=/dev/ram"<BR>># CONFIG_PM is not set<BR>>CONFIG_SECCOMP=y<BR>>CONFIG_ISA_DMA_API=y<BR>><BR>>#<BR>># Bus options<BR>>#<BR>># CONFIG_PCI is not set<BR>># CONFIG_PCI_DOMAINS is not set<BR>># CONFIG_PCI_QSPAN is not set<BR>><BR>>#<BR>># PCCARD (PCMCIA/CardBus) support<BR>>#<BR>># CONFIG_PCCARD is not set<BR>><BR>>#<BR>># Advanced setup<BR>>#<BR>># CONFIG_ADVANCED_OPTIONS is not set<BR>><BR>>#<BR>># Default settings for
advanced configuration options are used<BR>>#<BR>>CONFIG_HIGHMEM_START=0xfe000000<BR>>CONFIG_LOWMEM_SIZE=0x30000000<BR>>CONFIG_KERNEL_START=0xc0000000<BR>>CONFIG_TASK_SIZE=0x80000000<BR>>CONFIG_CONSISTENT_START=0xff100000<BR>>CONFIG_CONSISTENT_SIZE=0x00200000<BR>>CONFIG_BOOT_LOAD=0x00400000<BR>><BR>>#<BR>># Networking<BR>>#<BR>>CONFIG_NET=y<BR>><BR>>#<BR>># Networking options<BR>>#<BR>>CONFIG_PACKET=y<BR>>CONFIG_PACKET_MMAP=y<BR>>CONFIG_UNIX=y<BR>># CONFIG_NET_KEY is not set<BR>>CONFIG_INET=y<BR>># CONFIG_IP_MULTICAST is not set<BR>># CONFIG_IP_ADVANCED_ROUTER is not set<BR>>CONFIG_IP_FIB_HASH=y<BR>>CONFIG_IP_PNP=y<BR>>CONFIG_IP_PNP_DHCP=y<BR>>CONFIG_IP_PNP_BOOTP=y<BR>>CONFIG_IP_PNP_RARP=y<BR>># CONFIG_NET_IPIP is not set<BR>># CONFIG_NET_IPGRE is not set<BR>>CONFIG_ARPD=y<BR>># CONFIG_SYN_COOKIES is not set<BR>># CONFIG_INET_AH is not set<BR>># CONFIG_INET_ESP is not
set<BR>># CONFIG_INET_IPCOMP is not set<BR>># CONFIG_INET_TUNNEL is not set<BR>>CONFIG_IP_TCPDIAG=y<BR>>CONFIG_IP_TCPDIAG_IPV6=y<BR>># CONFIG_TCP_CONG_ADVANCED is not set<BR>>CONFIG_TCP_CONG_BIC=y<BR>>CONFIG_IPV6=y<BR>># CONFIG_IPV6_PRIVACY is not set<BR>># CONFIG_INET6_AH is not set<BR>># CONFIG_INET6_ESP is not set<BR>># CONFIG_INET6_IPCOMP is not set<BR>># CONFIG_INET6_TUNNEL is not set<BR>># CONFIG_IPV6_TUNNEL is not set<BR>># CONFIG_NETFILTER is not set<BR>><BR>>#<BR>># SCTP Configuration (EXPERIMENTAL)<BR>>#<BR>># CONFIG_IP_SCTP is not set<BR>># CONFIG_ATM is not set<BR>>CONFIG_BRIDGE=y<BR>># CONFIG_VLAN_8021Q is not set<BR>># CONFIG_DECNET is not set<BR>># CONFIG_LLC2 is not set<BR>># CONFIG_IPX is not set<BR>># CONFIG_ATALK is not set<BR>># CONFIG_X25 is not set<BR>># CONFIG_LAPB is not set<BR>># CONFIG_NET_DIVERT is not set<BR>># CONFIG_ECONET is not set<BR>># CONFIG_WAN_ROUTER is
not set<BR>># CONFIG_NET_SCHED is not set<BR>># CONFIG_NET_CLS_ROUTE is not set<BR>><BR>>#<BR>># Network testing<BR>>#<BR>># CONFIG_NET_PKTGEN is not set<BR>># CONFIG_HAMRADIO is not set<BR>># CONFIG_IRDA is not set<BR>># CONFIG_BT is not set<BR>><BR>>#<BR>># Device Drivers<BR>>#<BR>><BR>>#<BR>># Generic Driver Options<BR>>#<BR>>CONFIG_STANDALONE=y<BR>>CONFIG_PREVENT_FIRMWARE_BUILD=y<BR>># CONFIG_FW_LOADER is not set<BR>><BR>>#<BR>># Memory Technology Devices (MTD)<BR>>#<BR>># CONFIG_MTD is not set<BR>><BR>>#<BR>># Parallel port support<BR>>#<BR>># CONFIG_PARPORT is not set<BR>><BR>>#<BR>># Plug and Play support<BR>>#<BR>><BR>>#<BR>># Block devices<BR>>#<BR>># CONFIG_BLK_DEV_FD is not set<BR>># CONFIG_BLK_DEV_COW_COMMON is not set<BR>># CONFIG_BLK_DEV_LOOP is not set<BR>># CONFIG_BLK_DEV_NBD is not
set<BR>>CONFIG_BLK_DEV_RAM=y<BR>>CONFIG_BLK_DEV_RAM_COUNT=16<BR>>CONFIG_BLK_DEV_RAM_SIZE=4096<BR>>CONFIG_BLK_DEV_INITRD=y<BR>>CONFIG_INITRAMFS_SOURCE=""<BR>># CONFIG_LBD is not set<BR>># CONFIG_CDROM_PKTCDVD is not set<BR>><BR>>#<BR>># IO Schedulers<BR>>#<BR>>CONFIG_IOSCHED_NOOP=y<BR>># CONFIG_IOSCHED_AS is not set<BR>># CONFIG_IOSCHED_DEADLINE is not set<BR>># CONFIG_IOSCHED_CFQ is not set<BR>># CONFIG_ATA_OVER_ETH is not set<BR>><BR>>#<BR>># ATA/ATAPI/MFM/RLL support<BR>>#<BR>># CONFIG_IDE is not set<BR>><BR>>#<BR>># SCSI device support<BR>>#<BR>># CONFIG_SCSI is not set<BR>><BR>>#<BR>># Multi-device support (RAID and LVM)<BR>>#<BR>># CONFIG_MD is not set<BR>><BR>>#<BR>># Fusion MPT device support<BR>>#<BR>># CONFIG_FUSION is not set<BR>><BR>>#<BR>># IEEE 1394 (FireWire) support<BR>>#<BR>><BR>>#<BR>># I2O device support<BR>>#<BR>><BR>>#<BR>>#
Macintosh device drivers<BR>>#<BR>><BR>>#<BR>># Network device support<BR>>#<BR>>CONFIG_NETDEVICES=y<BR>># CONFIG_DUMMY is not set<BR>># CONFIG_BONDING is not set<BR>># CONFIG_EQUALIZER is not set<BR>># CONFIG_TUN is not set<BR>><BR>>#<BR>># Ethernet (10 or 100Mbit)<BR>>#<BR>>CONFIG_NET_ETHERNET=y<BR>>CONFIG_MII=y<BR>><BR>>#<BR>># Ethernet (1000 Mbit)<BR>>#<BR>><BR>>#<BR>># Ethernet (10000 Mbit)<BR>>#<BR>><BR>>#<BR>># Token Ring devices<BR>>#<BR>><BR>>#<BR>># Wireless LAN (non-hamradio)<BR>>#<BR>># CONFIG_NET_RADIO is not set<BR>><BR>>#<BR>># Wan interfaces<BR>>#<BR>># CONFIG_WAN is not set<BR>># CONFIG_PPP is not set<BR>># CONFIG_SLIP is not set<BR>># CONFIG_SHAPER is not set<BR>># CONFIG_NETCONSOLE is not set<BR>># CONFIG_NETPOLL is not set<BR>># CONFIG_NET_POLL_CONTROLLER is not set<BR>><BR>>#<BR>># ISDN subsystem<BR>>#<BR>>#
CONFIG_ISDN is not set<BR>><BR>>#<BR>># Telephony Support<BR>>#<BR>># CONFIG_PHONE is not set<BR>><BR>>#<BR>># Input device support<BR>>#<BR>>CONFIG_INPUT=y<BR>><BR>>#<BR>># Userland interfaces<BR>>#<BR>>CONFIG_INPUT_MOUSEDEV=y<BR>>CONFIG_INPUT_MOUSEDEV_PSAUX=y<BR>>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024<BR>>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768<BR>># CONFIG_INPUT_JOYDEV is not set<BR>># CONFIG_INPUT_TSDEV is not set<BR>># CONFIG_INPUT_EVDEV is not set<BR>># CONFIG_INPUT_EVBUG is not set<BR>><BR>>#<BR>># Input Device Drivers<BR>>#<BR>># CONFIG_INPUT_KEYBOARD is not set<BR>># CONFIG_INPUT_MOUSE is not set<BR>># CONFIG_INPUT_JOYSTICK is not set<BR>># CONFIG_INPUT_TOUCHSCREEN is not set<BR>># CONFIG_INPUT_MISC is not set<BR>><BR>>#<BR>># Hardware I/O ports<BR>>#<BR>># CONFIG_SERIO is not set<BR>># CONFIG_GAMEPORT is not set<BR>><BR>>#<BR>># Character
devices<BR>>#<BR>>CONFIG_VT=y<BR>>CONFIG_VT_CONSOLE=y<BR>>CONFIG_HW_CONSOLE=y<BR>>CONFIG_SERIAL_NONSTANDARD=y<BR>># CONFIG_COMPUTONE is not set<BR>># CONFIG_ROCKETPORT is not set<BR>># CONFIG_CYCLADES is not set<BR>># CONFIG_DIGIEPCA is not set<BR>># CONFIG_MOXA_INTELLIO is not set<BR>># CONFIG_MOXA_SMARTIO is not set<BR>># CONFIG_ISI is not set<BR>># CONFIG_SYNCLINKMP is not set<BR>># CONFIG_N_HDLC is not set<BR>># CONFIG_RISCOM8 is not set<BR>># CONFIG_SPECIALIX is not set<BR>># CONFIG_SX is not set<BR>># CONFIG_RIO is not set<BR>># CONFIG_STALDRV is not set<BR>><BR>>#<BR>># Serial drivers<BR>>#<BR>># CONFIG_SERIAL_8250 is not set<BR>><BR>>#<BR>># Non-8250 serial port support<BR>>#<BR>>CONFIG_SERIAL_CORE=y<BR>>CONFIG_SERIAL_CORE_CONSOLE=y<BR>>CONFIG_SERIAL_CPM=y<BR>>CONFIG_SERIAL_CPM_CONSOLE=y<BR>># CONFIG_SERIAL_CPM_SCC1 is not set<BR>># CONFIG_SERIAL_CPM_SCC2 is not set<BR>>#
CONFIG_SERIAL_CPM_SCC3 is not set<BR>># CONFIG_SERIAL_CPM_SCC4 is not set<BR>># CONFIG_SERIAL_CPM_SMC1 is not set<BR>>CONFIG_SERIAL_CPM_SMC2=y<BR>>CONFIG_UNIX98_PTYS=y<BR>># CONFIG_LEGACY_PTYS is not set<BR>><BR>>#<BR>># IPMI<BR>>#<BR>># CONFIG_IPMI_HANDLER is not set<BR>><BR>>#<BR>># Watchdog Cards<BR>>#<BR>># CONFIG_WATCHDOG is not set<BR>># CONFIG_NVRAM is not set<BR>># CONFIG_GEN_RTC is not set<BR>># CONFIG_DTLK is not set<BR>># CONFIG_R3964 is not set<BR>><BR>>#<BR>># Ftape, the floppy tape device driver<BR>>#<BR>># CONFIG_AGP is not set<BR>># CONFIG_RAW_DRIVER is not set<BR>><BR>>#<BR>># TPM devices<BR>>#<BR>><BR>>#<BR>># I2C support<BR>>#<BR>># CONFIG_I2C is not set<BR>># CONFIG_I2C_SENSOR is not set<BR>><BR>>#<BR>># Dallas's 1-wire bus<BR>>#<BR>># CONFIG_W1 is not set<BR>><BR>>#<BR>># Hardware Monitoring support<BR>>#<BR>># CONFIG_HWMON is
not set<BR>><BR>>#<BR>># Misc devices<BR>>#<BR>><BR>>#<BR>># Multimedia devices<BR>>#<BR>># CONFIG_VIDEO_DEV is not set<BR>><BR>>#<BR>># Digital Video Broadcasting Devices<BR>>#<BR>># CONFIG_DVB is not set<BR>><BR>>#<BR>># Graphics support<BR>>#<BR>># CONFIG_FB is not set<BR>><BR>>#<BR>># Console display driver support<BR>>#<BR>>CONFIG_DUMMY_CONSOLE=y<BR>><BR>>#<BR>># Sound<BR>>#<BR>># CONFIG_SOUND is not set<BR>><BR>>#<BR>># USB support<BR>>#<BR>># CONFIG_USB_ARCH_HAS_HCD is not set<BR>># CONFIG_USB_ARCH_HAS_OHCI is not set<BR>><BR>>#<BR>># USB Gadget Support<BR>>#<BR>># CONFIG_USB_GADGET is not set<BR>><BR>>#<BR>># MMC/SD Card support<BR>>#<BR>># CONFIG_MMC is not set<BR>><BR>>#<BR>># InfiniBand support<BR>>#<BR>><BR>>#<BR>># SN Devices<BR>>#<BR>><BR>>#<BR>># File
systems<BR>>#<BR>>CONFIG_EXT2_FS=y<BR>>CONFIG_EXT2_FS_XATTR=y<BR>>CONFIG_EXT2_FS_POSIX_ACL=y<BR>>CONFIG_EXT2_FS_SECURITY=y<BR>>CONFIG_EXT2_FS_XIP=y<BR>>CONFIG_FS_XIP=y<BR>># CONFIG_EXT3_FS is not set<BR>># CONFIG_JBD is not set<BR>>CONFIG_FS_MBCACHE=y<BR>># CONFIG_REISERFS_FS is not set<BR>># CONFIG_JFS_FS is not set<BR>>CONFIG_FS_POSIX_ACL=y<BR>><BR>>#<BR>># XFS support<BR>>#<BR>># CONFIG_XFS_FS is not set<BR>># CONFIG_MINIX_FS is not set<BR>>CONFIG_ROMFS_FS=y<BR>>CONFIG_INOTIFY=y<BR>># CONFIG_QUOTA is not set<BR>>CONFIG_DNOTIFY=y<BR>># CONFIG_AUTOFS_FS is not set<BR>># CONFIG_AUTOFS4_FS is not set<BR>><BR>>#<BR>># CD-ROM/DVD Filesystems<BR>>#<BR>># CONFIG_ISO9660_FS is not set<BR>># CONFIG_UDF_FS is not set<BR>><BR>>#<BR>># DOS/FAT/NT Filesystems<BR>>#<BR>># CONFIG_MSDOS_FS is not set<BR>># CONFIG_VFAT_FS is not set<BR>># CONFIG_NTFS_FS is not
set<BR>><BR>>#<BR>># Pseudo filesystems<BR>>#<BR>>CONFIG_PROC_FS=y<BR>># CONFIG_PROC_KCORE is not set<BR>>CONFIG_SYSFS=y<BR>># CONFIG_DEVPTS_FS_XATTR is not set<BR>># CONFIG_TMPFS is not set<BR>># CONFIG_HUGETLB_PAGE is not set<BR>>CONFIG_RAMFS=y<BR>><BR>>#<BR>># Miscellaneous filesystems<BR>>#<BR>># CONFIG_ADFS_FS is not set<BR>># CONFIG_AFFS_FS is not set<BR>># CONFIG_HFS_FS is not set<BR>># CONFIG_HFSPLUS_FS is not set<BR>># CONFIG_BEFS_FS is not set<BR>># CONFIG_BFS_FS is not set<BR>># CONFIG_EFS_FS is not set<BR>># CONFIG_CRAMFS is not set<BR>># CONFIG_VXFS_FS is not set<BR>># CONFIG_HPFS_FS is not set<BR>># CONFIG_QNX4FS_FS is not set<BR>># CONFIG_SYSV_FS is not set<BR>># CONFIG_UFS_FS is not set<BR>><BR>>#<BR>># Network File Systems<BR>>#<BR>>CONFIG_NFS_FS=y<BR>># CONFIG_NFS_V3 is not set<BR>># CONFIG_NFS_V4 is not set<BR>># CONFIG_NFS_DIRECTIO is not set<BR>>#
CONFIG_NFSD is not set<BR>>CONFIG_ROOT_NFS=y<BR>>CONFIG_LOCKD=y<BR>>CONFIG_NFS_COMMON=y<BR>>CONFIG_SUNRPC=y<BR>># CONFIG_RPCSEC_GSS_KRB5 is not set<BR>># CONFIG_RPCSEC_GSS_SPKM3 is not set<BR>># CONFIG_SMB_FS is not set<BR>># CONFIG_CIFS is not set<BR>># CONFIG_NCP_FS is not set<BR>># CONFIG_CODA_FS is not set<BR>># CONFIG_AFS_FS is not set<BR>><BR>>#<BR>># Partition Types<BR>>#<BR>># CONFIG_PARTITION_ADVANCED is not set<BR>>CONFIG_MSDOS_PARTITION=y<BR>><BR>>#<BR>># Native Language Support<BR>>#<BR>># CONFIG_NLS is not set<BR>><BR>>#<BR>># MPC8xx CPM Options<BR>>#<BR>># CONFIG_SCC_ENET is not set<BR>>CONFIG_FEC_ENET=y<BR>>CONFIG_USE_MDIO=y<BR>>CONFIG_FEC_AM79C874=y<BR>># CONFIG_FEC_LXT970 is not set<BR>># CONFIG_FEC_LXT971 is not set<BR>># CONFIG_FEC_QS6612 is not set<BR>>CONFIG_ENET_BIG_BUFFERS=y<BR>><BR>>#<BR>># Generic MPC8xx Options<BR>>#<BR>># CONFIG_8xx_COPYBACK
is not set<BR>># CONFIG_8xx_CPU6 is not set<BR>>CONFIG_NO_UCODE_PATCH=y<BR>># CONFIG_USB_SOF_UCODE_PATCH is not set<BR>># CONFIG_I2C_SPI_UCODE_PATCH is not set<BR>># CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set<BR>><BR>>#<BR>># Library routines<BR>>#<BR>># CONFIG_CRC_CCITT is not set<BR>># CONFIG_CRC32 is not set<BR>># CONFIG_LIBCRC32C is not set<BR>><BR>>#<BR>># Profiling support<BR>>#<BR>># CONFIG_PROFILING is not set<BR>><BR>>#<BR>># Kernel hacking<BR>>#<BR>># CONFIG_PRINTK_TIME is not set<BR>># CONFIG_DEBUG_KERNEL is not set<BR>>CONFIG_LOG_BUF_SHIFT=14<BR>><BR>>#<BR>># Security options<BR>>#<BR>># CONFIG_KEYS is not set<BR>># CONFIG_SECURITY is not set<BR>><BR>>#<BR>># Cryptographic options<BR>>#<BR>># CONFIG_CRYPTO is not set<BR>><BR>>#<BR>># Hardware crypto devices<BR>>#<BR>>
<BR>><BR>>------------------------------------------------------------------------<BR>><BR>>_______________________________________________<BR>>Linuxppc-embedded mailing list<BR>><A href="mailto:Linuxppc-embedded@ozlabs.org">Linuxppc-embedded@ozlabs.org</A><BR>><A href="https://ozlabs.org/mailman/listinfo/linuxppc-embedded">https://ozlabs.org/mailman/listinfo/linuxppc-embedded</A><BR>></div> <div> </div> <div> </div><p>
<hr size=1>Yahoo! Photos<br>
Ring in the New Year with <a href="http://us.rd.yahoo.com/mail_us/taglines/photos/*http://pg.photos.yahoo.com/ph//page?.file=calendar_splash.html&.dir=">Photo Calendars</a>. Add photos, events, holidays, whatever.