<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7232.39">
<TITLE>Linux kernel Hangs after transfer</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>Hi All,<BR>
<BR>
My target is MPC8247 board where i tried to load my MPC8272 kernel tested by montavista , i loaded linux image uImage at 100000 and it hangs after transferrinbg linux kernel . when i used to debug it found that it is not able to write to the console the log messages . it is hung at my_write_console ... so can some one help me to debug this .. i am getting following log when i try to bootm 100000<BR>
<BR>
<BR>
Bytes transferred = 644777 (9d6a9 hex)<BR>
=> bootm<BR>
## Booting image at 00100000 ...<BR>
Image Name: Linux-2.4.20_mvl31-8272ads<BR>
Image Type: PowerPC Linux Kernel Image (gzip compressed)<BR>
Data Size: 644713 Bytes = 629.6 kB<BR>
Load Address: 00000000<BR>
Entry Point: 00000000<BR>
Verifying Checksum ... OK<BR>
Uncompressing Kernel Image ... OK<BR>
## Current stack ends at 0x0FBC08D8 => set upper limit to 0x00800000<BR>
## cmdline at 0x007FFF00 ... 0x007FFF68<BR>
bd address = 0x0FBC0BB4<BR>
memstart = 0x00000000<BR>
memsize = 0x10000000<BR>
flashstart = 0xFE000000<BR>
flashsize = 0x02000000<BR>
flashoffset = 0x00000000<BR>
sramstart = 0x00000000<BR>
sramsize = 0x00000000<BR>
immr_base = 0xF0000000<BR>
bootflags = 0x00000001<BR>
vco = 396 MHz<BR>
sccfreq = 99 MHz<BR>
brgfreq = 24.750 MHz<BR>
intfreq = 264 MHz<BR>
cpmfreq = 198 MHz<BR>
busfreq = 66 MHz<BR>
ethaddr = 00:11:22:33:44:55<BR>
IP addr = 192.168.80.196<BR>
baudrate = 115200 bps<BR>
No initrd<BR>
## Transferring control to Linux (at address 00000000) ...<BR>
<BR>
<BR>
Thanks & Regards<BR>
Srideep Reddy D<BR>
<BR>
<BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>
<table><tr><td bgcolor=#ffffff><font color=#000000><br>
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. <br>
<br>
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.<br>
<br>
www.wipro.com<br>
</font></td></tr></table>