<p>Hello all,<br>I am loading a linux kernel onto ML310 board .I want networking support and hence I have a pci enabled design.<br>I am using linux 2.4 powerpc devel kernel. I have also tried the montavista previewkit<br>But I end up with the same problem. I have enabled the option " support for early boot texts: in the kernel debugging.
<br>Now once run the kernel program in powerpc I get the following essages in the serial minicom terminal<br>Enter Desired System ACE CF Configuration <0-7>. <br> 0: ACE-loader. <br> 1: Linux w/PCI. <br> 2: VxWorks w/PCI.
<br> 3: QNX Demo. <br> 4: Linux EDK Base Build. <br> 5: VxWorks EDK Base Build. <br> 6: User Configuration A. <br> 7: User Configuration B. </p>
<p><br>Select: <br>loaded at: 00400000 008CB1E0 <br>board data at: 008C8138 008C8150 <br>relocated to: 00405308 00405320 <br>zimage at: 00405813 004DE42A <br>initrd at: 004DF000 008C7382 <br>avail ram: 008CC000 10000000
</p>
<p><br>Linux/PPC load: console=ttyS0,9600 root=/dev/xsysace/disc0/part2 rw <br>Uncompressing Linux...done. <br>Now booting the kernel </p>
<p> </p>
<p> </p>
<p><br>The prompt goes dead at this point.The board details is available at <a href="http://www.xilinx.com/ml310">www.xilinx.com/ml310</a></p>
<p>Any workarounds?</p>
<p>Thanks,</p>
<p>Nitesh</p>