<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE></TITLE>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2722" name=GENERATOR></HEAD>
<BODY><!-- Converted from text/plain format -->
<P><FONT size=2>Hi, all<BR> Please
help solve this problem , or give me some advise .<BR>Thanks a lot
!<BR><BR><BR><STRONG>Distribution:</STRONG> kernel from kernel.org , cross
compiler from www.DENX.de<BR><STRONG>Hardware Environment:</STRONG> mpc8540_ads
demo board + promise20268 PCI-IDE chard + HD<BR><STRONG>Software
Environment:</STRONG> kernel from kernel.org , cross compiler for powerpc from
www.DENX.de , and simple file system with busybox.<BR><STRONG>Problem
Description:</STRONG><BR> The kernel shows "lost interrupt"
after the promise20268 PCI-IDE card be<BR>finded , and the /proc/partitions
shows correct message , but when mount the<BR>HD , it shows " lost interrupt "
again<BR><BR><STRONG>Steps to reproduce:</STRONG> Include the .config file and
the steps of boot are below .<BR><BR>.config file<BR>#-----------------start
here------------------------<BR>#<BR># Automatically generated make config:
don't edit<BR># Linux kernel version: 2.6.13<BR># Fri Sep 9 15:48:15
2005<BR>#<BR>CONFIG_MMU=y<BR>CONFIG_GENERIC_HARDIRQS=y<BR>CONFIG_RWSEM_XCHGADD_ALGORITHM=y<BR>CONFIG_GENERIC_CALIBRATE_DELAY=y<BR>CONFIG_HAVE_DEC_LOCK=y<BR>CONFIG_PPC=y<BR>CONFIG_PPC32=y<BR>CONFIG_GENERIC_NVRAM=y<BR>CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y<BR><BR>#<BR>#
Code maturity level
options<BR>#<BR>CONFIG_EXPERIMENTAL=y<BR>CONFIG_CLEAN_COMPILE=y<BR>CONFIG_BROKEN_ON_SMP=y<BR>CONFIG_INIT_ENV_ARG_LIMIT=32<BR><BR>#<BR>#
General
setup<BR>#<BR>CONFIG_LOCALVERSION=""<BR>CONFIG_SWAP=y<BR>CONFIG_SYSVIPC=y<BR>#
CONFIG_POSIX_MQUEUE is not set<BR># CONFIG_BSD_PROCESS_ACCT is not
set<BR>CONFIG_SYSCTL=y<BR># CONFIG_AUDIT is not set<BR># CONFIG_HOTPLUG is not
set<BR>CONFIG_KOBJECT_UEVENT=y<BR># CONFIG_IKCONFIG is not
set<BR>CONFIG_EMBEDDED=y<BR># CONFIG_KALLSYMS is not
set<BR>CONFIG_PRINTK=y<BR>CONFIG_BUG=y<BR>CONFIG_BASE_FULL=y<BR>CONFIG_FUTEX=y<BR>#
CONFIG_EPOLL is not set<BR># CONFIG_CC_OPTIMIZE_FOR_SIZE is not
set<BR>CONFIG_SHMEM=y<BR>CONFIG_CC_ALIGN_FUNCTIONS=0<BR>CONFIG_CC_ALIGN_LABELS=0<BR>CONFIG_CC_ALIGN_LOOPS=0<BR>CONFIG_CC_ALIGN_JUMPS=0<BR>#
CONFIG_TINY_SHMEM is not set<BR>CONFIG_BASE_SMALL=0<BR><BR>#<BR># Loadable
module support<BR>#<BR># CONFIG_MODULES is not set<BR><BR>#<BR>#
Processor<BR>#<BR># CONFIG_6xx is not set<BR># CONFIG_40x is not set<BR>#
CONFIG_44x is not set<BR># CONFIG_POWER3 is not set<BR># CONFIG_POWER4 is not
set<BR># CONFIG_8xx is not set<BR># CONFIG_E200 is not
set<BR>CONFIG_E500=y<BR>CONFIG_BOOKE=y<BR>CONFIG_FSL_BOOKE=y<BR>#
CONFIG_PHYS_64BIT is not set<BR>CONFIG_SPE=y<BR>CONFIG_MATH_EMULATION=y<BR>#
CONFIG_KEXEC is not set<BR># CONFIG_CPU_FREQ is not set<BR>#
CONFIG_WANT_EARLY_SERIAL is not
set<BR>CONFIG_PPC_GEN550=y<BR>CONFIG_85xx=y<BR>CONFIG_PPC_INDIRECT_PCI_BE=y<BR><BR>#<BR>#
Freescale 85xx options<BR>#<BR>CONFIG_MPC8540_ADS=y<BR># CONFIG_MPC8548_CDS is
not set<BR># CONFIG_MPC8555_CDS is not set<BR># CONFIG_MPC8560_ADS is not
set<BR># CONFIG_SBC8560 is not set<BR># CONFIG_STX_GP3 is not
set<BR>CONFIG_MPC8540=y<BR><BR>#<BR># Platform options<BR>#<BR># CONFIG_HIGHMEM
is not set<BR># CONFIG_HZ_100 is not set<BR>CONFIG_HZ_250=y<BR># CONFIG_HZ_1000
is not set<BR>CONFIG_HZ=250<BR>CONFIG_PREEMPT_NONE=y<BR>#
CONFIG_PREEMPT_VOLUNTARY is not set<BR># CONFIG_PREEMPT is not
set<BR>CONFIG_SELECT_MEMORY_MODEL=y<BR>CONFIG_FLATMEM_MANUAL=y<BR>#
CONFIG_DISCONTIGMEM_MANUAL is not set<BR># CONFIG_SPARSEMEM_MANUAL is not
set<BR>CONFIG_FLATMEM=y<BR>CONFIG_FLAT_NODE_MEM_MAP=y<BR>CONFIG_BINFMT_ELF=y<BR>#
CONFIG_BINFMT_MISC is not set<BR># CONFIG_CMDLINE_BOOL is not set<BR># CONFIG_PM
is not set<BR>CONFIG_SECCOMP=y<BR>CONFIG_ISA_DMA_API=y<BR><BR>#<BR># Bus
options<BR>#<BR>CONFIG_PCI=y<BR>CONFIG_PCI_DOMAINS=y<BR># CONFIG_PCI_LEGACY_PROC
is not set<BR>CONFIG_PCI_NAMES=y<BR><BR>#<BR># PCCARD (PCMCIA/CardBus)
support<BR>#<BR># CONFIG_PCCARD is not set<BR><BR>#<BR># Advanced
setup<BR>#<BR># CONFIG_ADVANCED_OPTIONS is not set<BR><BR>#<BR># Default
settings for advanced configuration options are
used<BR>#<BR>CONFIG_HIGHMEM_START=0xfe000000<BR>CONFIG_LOWMEM_SIZE=0x30000000<BR>CONFIG_KERNEL_START=0xc0000000<BR>CONFIG_TASK_SIZE=0x80000000<BR>CONFIG_BOOT_LOAD=0x00800000<BR><BR>#<BR>#
Networking<BR>#<BR>CONFIG_NET=y<BR><BR>#<BR># Networking
options<BR>#<BR>CONFIG_PACKET=y<BR># CONFIG_PACKET_MMAP is not
set<BR>CONFIG_UNIX=y<BR># CONFIG_NET_KEY is not
set<BR>CONFIG_INET=y<BR>CONFIG_IP_MULTICAST=y<BR># CONFIG_IP_ADVANCED_ROUTER is
not
set<BR>CONFIG_IP_FIB_HASH=y<BR>CONFIG_IP_PNP=y<BR>CONFIG_IP_PNP_DHCP=y<BR>CONFIG_IP_PNP_BOOTP=y<BR>#
CONFIG_IP_PNP_RARP is not set<BR># CONFIG_NET_IPIP is not set<BR>#
CONFIG_NET_IPGRE is not set<BR># CONFIG_IP_MROUTE is not set<BR># CONFIG_ARPD is
not set<BR>CONFIG_SYN_COOKIES=y<BR># CONFIG_INET_AH is not set<BR>#
CONFIG_INET_ESP is not set<BR># CONFIG_INET_IPCOMP is not set<BR>#
CONFIG_INET_TUNNEL is not set<BR>CONFIG_IP_TCPDIAG=y<BR># CONFIG_IP_TCPDIAG_IPV6
is not set<BR># CONFIG_TCP_CONG_ADVANCED is not
set<BR>CONFIG_TCP_CONG_BIC=y<BR># CONFIG_IPV6 is not set<BR># CONFIG_NETFILTER
is not set<BR><BR>#<BR># SCTP Configuration (EXPERIMENTAL)<BR>#<BR>#
CONFIG_IP_SCTP is not set<BR># CONFIG_ATM is not set<BR># CONFIG_BRIDGE is not
set<BR># CONFIG_VLAN_8021Q is not set<BR># CONFIG_DECNET is not set<BR>#
CONFIG_LLC2 is not set<BR># CONFIG_IPX is not set<BR># CONFIG_ATALK is not
set<BR># CONFIG_X25 is not set<BR># CONFIG_LAPB is not set<BR>#
CONFIG_NET_DIVERT is not set<BR># CONFIG_ECONET is not set<BR>#
CONFIG_WAN_ROUTER is not set<BR># CONFIG_NET_SCHED is not set<BR>#
CONFIG_NET_CLS_ROUTE is not set<BR><BR>#<BR># Network testing<BR>#<BR>#
CONFIG_NET_PKTGEN is not set<BR># CONFIG_HAMRADIO is not set<BR># CONFIG_IRDA is
not set<BR># CONFIG_BT is not set<BR><BR>#<BR># Device
Drivers<BR>#<BR><BR>#<BR># Generic Driver
Options<BR>#<BR>CONFIG_STANDALONE=y<BR>CONFIG_PREVENT_FIRMWARE_BUILD=y<BR>#
CONFIG_FW_LOADER is not set<BR><BR>#<BR># Memory Technology Devices
(MTD)<BR>#<BR># CONFIG_MTD is not set<BR><BR>#<BR># Parallel port
support<BR>#<BR># CONFIG_PARPORT is not set<BR><BR>#<BR># Plug and Play
support<BR>#<BR><BR>#<BR># Block devices<BR>#<BR># CONFIG_BLK_DEV_FD is not
set<BR># CONFIG_BLK_CPQ_DA is not set<BR># CONFIG_BLK_CPQ_CISS_DA is not
set<BR># CONFIG_BLK_DEV_DAC960 is not set<BR># CONFIG_BLK_DEV_UMEM is not
set<BR># CONFIG_BLK_DEV_COW_COMMON is not set<BR>CONFIG_BLK_DEV_LOOP=y<BR>#
CONFIG_BLK_DEV_CRYPTOLOOP is not set<BR># CONFIG_BLK_DEV_NBD is not set<BR>#
CONFIG_BLK_DEV_SX8 is not
set<BR>CONFIG_BLK_DEV_RAM=y<BR>CONFIG_BLK_DEV_RAM_COUNT=16<BR>CONFIG_BLK_DEV_RAM_SIZE=32768<BR>CONFIG_BLK_DEV_INITRD=y<BR>CONFIG_INITRAMFS_SOURCE=""<BR>CONFIG_LBD=y<BR>#
CONFIG_CDROM_PKTCDVD is not set<BR><BR>#<BR># IO
Schedulers<BR>#<BR>CONFIG_IOSCHED_NOOP=y<BR>CONFIG_IOSCHED_AS=y<BR>CONFIG_IOSCHED_DEADLINE=y<BR>CONFIG_IOSCHED_CFQ=y<BR>#
CONFIG_ATA_OVER_ETH is not set<BR><BR>#<BR># ATA/ATAPI/MFM/RLL
support<BR>#<BR>CONFIG_IDE=y<BR>CONFIG_BLK_DEV_IDE=y<BR><BR>#<BR># Please see
Documentation/ide.txt for help/info on IDE drives<BR>#<BR>#
CONFIG_BLK_DEV_IDE_SATA is not
set<BR>CONFIG_BLK_DEV_IDEDISK=y<BR>CONFIG_IDEDISK_MULTI_MODE=y<BR>CONFIG_BLK_DEV_IDECD=y<BR>#
CONFIG_BLK_DEV_IDETAPE is not set<BR># CONFIG_BLK_DEV_IDEFLOPPY is not set<BR>#
CONFIG_IDE_TASK_IOCTL is not set<BR><BR>#<BR># IDE chipset
support/bugfixes<BR>#<BR>CONFIG_IDE_GENERIC=y<BR>CONFIG_BLK_DEV_IDEPCI=y<BR>CONFIG_IDEPCI_SHARE_IRQ=y<BR>#
CONFIG_BLK_DEV_OFFBOARD is not set<BR>CONFIG_BLK_DEV_GENERIC=y<BR>#
CONFIG_BLK_DEV_OPTI621 is not set<BR># CONFIG_BLK_DEV_SL82C105 is not
set<BR>CONFIG_BLK_DEV_IDEDMA_PCI=y<BR># CONFIG_BLK_DEV_IDEDMA_FORCED is not
set<BR>CONFIG_IDEDMA_PCI_AUTO=y<BR># CONFIG_IDEDMA_ONLYDISK is not set<BR>#
CONFIG_BLK_DEV_AEC62XX is not set<BR># CONFIG_BLK_DEV_ALI15X3 is not set<BR>#
CONFIG_BLK_DEV_AMD74XX is not set<BR># CONFIG_BLK_DEV_CMD64X is not set<BR>#
CONFIG_BLK_DEV_TRIFLEX is not set<BR># CONFIG_BLK_DEV_CY82C693 is not set<BR>#
CONFIG_BLK_DEV_CS5520 is not set<BR># CONFIG_BLK_DEV_CS5530 is not set<BR>#
CONFIG_BLK_DEV_HPT34X is not set<BR># CONFIG_BLK_DEV_HPT366 is not set<BR>#
CONFIG_BLK_DEV_SC1200 is not set<BR># CONFIG_BLK_DEV_PIIX is not set<BR>#
CONFIG_BLK_DEV_IT821X is not set<BR># CONFIG_BLK_DEV_NS87415 is not set<BR>#
CONFIG_BLK_DEV_PDC202XX_OLD is not set<BR>CONFIG_BLK_DEV_PDC202XX_NEW=y<BR>#
CONFIG_PDC202XX_FORCE is not set<BR># CONFIG_BLK_DEV_SVWKS is not set<BR>#
CONFIG_BLK_DEV_SIIMAGE is not set<BR># CONFIG_BLK_DEV_SLC90E66 is not set<BR>#
CONFIG_BLK_DEV_TRM290 is not set<BR># CONFIG_BLK_DEV_VIA82CXXX is not set<BR>#
CONFIG_IDE_ARM is not set<BR>CONFIG_BLK_DEV_IDEDMA=y<BR># CONFIG_IDEDMA_IVB is
not set<BR>CONFIG_IDEDMA_AUTO=y<BR># CONFIG_BLK_DEV_HD is not set<BR><BR>#<BR>#
SCSI device support<BR>#<BR># CONFIG_SCSI is not set<BR><BR>#<BR># Multi-device
support (RAID and LVM)<BR>#<BR># CONFIG_MD is not set<BR><BR>#<BR># Fusion MPT
device support<BR>#<BR># CONFIG_FUSION is not set<BR><BR>#<BR># IEEE 1394
(FireWire) support<BR>#<BR># CONFIG_IEEE1394 is not set<BR><BR>#<BR># I2O device
support<BR>#<BR># CONFIG_I2O is not set<BR><BR>#<BR># Macintosh device
drivers<BR>#<BR><BR>#<BR># Network device
support<BR>#<BR>CONFIG_NETDEVICES=y<BR># CONFIG_DUMMY is not set<BR>#
CONFIG_BONDING is not set<BR># CONFIG_EQUALIZER is not set<BR># CONFIG_TUN is
not set<BR><BR>#<BR># ARCnet devices<BR>#<BR># CONFIG_ARCNET is not
set<BR><BR>#<BR># Ethernet (10 or
100Mbit)<BR>#<BR>CONFIG_NET_ETHERNET=y<BR>CONFIG_MII=y<BR># CONFIG_HAPPYMEAL is
not set<BR># CONFIG_SUNGEM is not set<BR># CONFIG_NET_VENDOR_3COM is not
set<BR><BR>#<BR># Tulip family network device support<BR>#<BR># CONFIG_NET_TULIP
is not set<BR># CONFIG_HP100 is not set<BR># CONFIG_NET_PCI is not
set<BR><BR>#<BR># Ethernet (1000 Mbit)<BR>#<BR># CONFIG_ACENIC is not set<BR>#
CONFIG_DL2K is not set<BR># CONFIG_E1000 is not set<BR># CONFIG_NS83820 is not
set<BR># CONFIG_HAMACHI is not set<BR># CONFIG_YELLOWFIN is not set<BR>#
CONFIG_R8169 is not set<BR># CONFIG_SKGE is not set<BR># CONFIG_SK98LIN is not
set<BR># CONFIG_TIGON3 is not set<BR># CONFIG_BNX2 is not
set<BR>CONFIG_GIANFAR=y<BR>CONFIG_GFAR_NAPI=y<BR><BR>#<BR># Ethernet (10000
Mbit)<BR>#<BR># CONFIG_IXGB is not set<BR># CONFIG_S2IO is not set<BR><BR>#<BR>#
Token Ring devices<BR>#<BR># CONFIG_TR is not set<BR><BR>#<BR># Wireless LAN
(non-hamradio)<BR>#<BR># CONFIG_NET_RADIO is not set<BR><BR>#<BR># Wan
interfaces<BR>#<BR># CONFIG_WAN is not set<BR># CONFIG_FDDI is not set<BR>#
CONFIG_HIPPI is not set<BR># CONFIG_PPP is not set<BR># CONFIG_SLIP is not
set<BR># CONFIG_SHAPER is not set<BR># CONFIG_NETCONSOLE is not set<BR>#
CONFIG_NETPOLL is not set<BR># CONFIG_NET_POLL_CONTROLLER is not
set<BR><BR>#<BR># ISDN subsystem<BR>#<BR># CONFIG_ISDN is not set<BR><BR>#<BR>#
Telephony Support<BR>#<BR># CONFIG_PHONE is not set<BR><BR>#<BR># Input device
support<BR>#<BR>CONFIG_INPUT=y<BR><BR>#<BR># Userland interfaces<BR>#<BR>#
CONFIG_INPUT_MOUSEDEV is not set<BR># CONFIG_INPUT_JOYDEV is not set<BR>#
CONFIG_INPUT_TSDEV is not set<BR># CONFIG_INPUT_EVDEV is not set<BR>#
CONFIG_INPUT_EVBUG is not set<BR><BR>#<BR># Input Device Drivers<BR>#<BR>#
CONFIG_INPUT_KEYBOARD is not set<BR># CONFIG_INPUT_MOUSE is not set<BR>#
CONFIG_INPUT_JOYSTICK is not set<BR># CONFIG_INPUT_TOUCHSCREEN is not set<BR>#
CONFIG_INPUT_MISC is not set<BR><BR>#<BR># Hardware I/O ports<BR>#<BR>#
CONFIG_SERIO is not set<BR># CONFIG_GAMEPORT is not set<BR><BR>#<BR># Character
devices<BR>#<BR># CONFIG_VT is not set<BR># CONFIG_SERIAL_NONSTANDARD is not
set<BR><BR>#<BR># Serial
drivers<BR>#<BR>CONFIG_SERIAL_8250=y<BR>CONFIG_SERIAL_8250_CONSOLE=y<BR>CONFIG_SERIAL_8250_NR_UARTS=4<BR>#
CONFIG_SERIAL_8250_EXTENDED is not set<BR><BR>#<BR># Non-8250 serial port
support<BR>#<BR>CONFIG_SERIAL_CORE=y<BR>CONFIG_SERIAL_CORE_CONSOLE=y<BR>#
CONFIG_SERIAL_JSM is not
set<BR>CONFIG_UNIX98_PTYS=y<BR>CONFIG_LEGACY_PTYS=y<BR>CONFIG_LEGACY_PTY_COUNT=256<BR><BR>#<BR>#
IPMI<BR>#<BR># CONFIG_IPMI_HANDLER is not set<BR><BR>#<BR># Watchdog
Cards<BR>#<BR># CONFIG_WATCHDOG is not set<BR># CONFIG_NVRAM is not
set<BR>CONFIG_GEN_RTC=y<BR># CONFIG_GEN_RTC_X is not set<BR># CONFIG_DTLK is not
set<BR># CONFIG_R3964 is not set<BR># CONFIG_APPLICOM is not set<BR><BR>#<BR>#
Ftape, the floppy tape device driver<BR>#<BR># CONFIG_AGP is not set<BR>#
CONFIG_DRM is not set<BR># CONFIG_RAW_DRIVER is not set<BR><BR>#<BR># TPM
devices<BR>#<BR># CONFIG_TCG_TPM is not set<BR><BR>#<BR># I2C
support<BR>#<BR>CONFIG_I2C=y<BR>CONFIG_I2C_CHARDEV=y<BR><BR>#<BR># I2C
Algorithms<BR>#<BR># CONFIG_I2C_ALGOBIT is not set<BR># CONFIG_I2C_ALGOPCF is
not set<BR># CONFIG_I2C_ALGOPCA is not set<BR><BR>#<BR># I2C Hardware Bus
support<BR>#<BR># CONFIG_I2C_ALI1535 is not set<BR># CONFIG_I2C_ALI1563 is not
set<BR># CONFIG_I2C_ALI15X3 is not set<BR># CONFIG_I2C_AMD756 is not set<BR>#
CONFIG_I2C_AMD8111 is not set<BR># CONFIG_I2C_I801 is not set<BR>#
CONFIG_I2C_I810 is not set<BR># CONFIG_I2C_PIIX4 is not set<BR># CONFIG_I2C_ISA
is not set<BR>CONFIG_I2C_MPC=y<BR># CONFIG_I2C_NFORCE2 is not set<BR>#
CONFIG_I2C_PARPORT_LIGHT is not set<BR># CONFIG_I2C_PROSAVAGE is not set<BR>#
CONFIG_I2C_SAVAGE4 is not set<BR># CONFIG_SCx200_ACB is not set<BR>#
CONFIG_I2C_SIS5595 is not set<BR># CONFIG_I2C_SIS630 is not set<BR>#
CONFIG_I2C_SIS96X is not set<BR># CONFIG_I2C_VIA is not set<BR>#
CONFIG_I2C_VIAPRO is not set<BR># CONFIG_I2C_VOODOO3 is not set<BR>#
CONFIG_I2C_PCA_ISA is not set<BR># CONFIG_I2C_SENSOR is not set<BR><BR>#<BR>#
Miscellaneous I2C Chip support<BR>#<BR># CONFIG_SENSORS_DS1337 is not set<BR>#
CONFIG_SENSORS_DS1374 is not set<BR># CONFIG_SENSORS_EEPROM is not set<BR>#
CONFIG_SENSORS_PCF8574 is not set<BR># CONFIG_SENSORS_PCA9539 is not set<BR>#
CONFIG_SENSORS_PCF8591 is not set<BR># CONFIG_SENSORS_RTC8564 is not set<BR>#
CONFIG_SENSORS_M41T00 is not set<BR># CONFIG_SENSORS_MAX6875 is not set<BR>#
CONFIG_I2C_DEBUG_CORE is not set<BR># CONFIG_I2C_DEBUG_ALGO is not set<BR>#
CONFIG_I2C_DEBUG_BUS is not set<BR># CONFIG_I2C_DEBUG_CHIP is not
set<BR><BR>#<BR># Dallas's 1-wire bus<BR>#<BR># CONFIG_W1 is not
set<BR><BR>#<BR># Hardware Monitoring support<BR>#<BR>CONFIG_HWMON=y<BR>#
CONFIG_SENSORS_ADM1021 is not set<BR># CONFIG_SENSORS_ADM1025 is not set<BR>#
CONFIG_SENSORS_ADM1026 is not set<BR># CONFIG_SENSORS_ADM1031 is not set<BR>#
CONFIG_SENSORS_ADM9240 is not set<BR># CONFIG_SENSORS_ASB100 is not set<BR>#
CONFIG_SENSORS_ATXP1 is not set<BR># CONFIG_SENSORS_DS1621 is not set<BR>#
CONFIG_SENSORS_FSCHER is not set<BR># CONFIG_SENSORS_FSCPOS is not set<BR>#
CONFIG_SENSORS_GL518SM is not set<BR># CONFIG_SENSORS_GL520SM is not set<BR>#
CONFIG_SENSORS_IT87 is not set<BR># CONFIG_SENSORS_LM63 is not set<BR>#
CONFIG_SENSORS_LM75 is not set<BR># CONFIG_SENSORS_LM77 is not set<BR>#
CONFIG_SENSORS_LM78 is not set<BR># CONFIG_SENSORS_LM80 is not set<BR>#
CONFIG_SENSORS_LM83 is not set<BR># CONFIG_SENSORS_LM85 is not set<BR>#
CONFIG_SENSORS_LM87 is not set<BR># CONFIG_SENSORS_LM90 is not set<BR>#
CONFIG_SENSORS_LM92 is not set<BR># CONFIG_SENSORS_MAX1619 is not set<BR>#
CONFIG_SENSORS_PC87360 is not set<BR># CONFIG_SENSORS_SIS5595 is not set<BR>#
CONFIG_SENSORS_SMSC47M1 is not set<BR># CONFIG_SENSORS_SMSC47B397 is not
set<BR># CONFIG_SENSORS_VIA686A is not set<BR># CONFIG_SENSORS_W83781D is not
set<BR># CONFIG_SENSORS_W83L785TS is not set<BR># CONFIG_SENSORS_W83627HF is not
set<BR># CONFIG_SENSORS_W83627EHF is not set<BR># CONFIG_HWMON_DEBUG_CHIP is not
set<BR><BR>#<BR># Misc devices<BR>#<BR><BR>#<BR># Multimedia devices<BR>#<BR>#
CONFIG_VIDEO_DEV is not set<BR><BR>#<BR># Digital Video Broadcasting
Devices<BR>#<BR># CONFIG_DVB is not set<BR><BR>#<BR># Graphics support<BR>#<BR>#
CONFIG_FB is not set<BR><BR>#<BR># Sound<BR>#<BR># CONFIG_SOUND is not
set<BR><BR>#<BR># USB
support<BR>#<BR>CONFIG_USB_ARCH_HAS_HCD=y<BR>CONFIG_USB_ARCH_HAS_OHCI=y<BR>#
CONFIG_USB is not set<BR><BR>#<BR># USB Gadget Support<BR>#<BR>#
CONFIG_USB_GADGET is not set<BR><BR>#<BR># MMC/SD Card support<BR>#<BR>#
CONFIG_MMC is not set<BR><BR>#<BR># InfiniBand support<BR>#<BR>#
CONFIG_INFINIBAND is not set<BR><BR>#<BR># SN Devices<BR>#<BR><BR>#<BR># File
systems<BR>#<BR>CONFIG_EXT2_FS=y<BR># CONFIG_EXT2_FS_XATTR is not set<BR>#
CONFIG_EXT2_FS_XIP is not set<BR>CONFIG_EXT3_FS=y<BR>CONFIG_EXT3_FS_XATTR=y<BR>#
CONFIG_EXT3_FS_POSIX_ACL is not set<BR># CONFIG_EXT3_FS_SECURITY is not
set<BR>CONFIG_JBD=y<BR># CONFIG_JBD_DEBUG is not set<BR>CONFIG_FS_MBCACHE=y<BR>#
CONFIG_REISERFS_FS is not set<BR># CONFIG_JFS_FS is not set<BR>#
CONFIG_FS_POSIX_ACL is not set<BR><BR>#<BR># XFS support<BR>#<BR># CONFIG_XFS_FS
is not set<BR># CONFIG_MINIX_FS is not set<BR># CONFIG_ROMFS_FS is not
set<BR>CONFIG_INOTIFY=y<BR># CONFIG_QUOTA is not set<BR>CONFIG_DNOTIFY=y<BR>#
CONFIG_AUTOFS_FS is not set<BR># CONFIG_AUTOFS4_FS is not set<BR><BR>#<BR>#
CD-ROM/DVD Filesystems<BR>#<BR># CONFIG_ISO9660_FS is not set<BR># CONFIG_UDF_FS
is not set<BR><BR>#<BR># DOS/FAT/NT
Filesystems<BR>#<BR>CONFIG_FAT_FS=y<BR>CONFIG_MSDOS_FS=y<BR>CONFIG_VFAT_FS=y<BR>CONFIG_FAT_DEFAULT_CODEPAGE=437<BR>CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"<BR>CONFIG_NTFS_FS=y<BR>CONFIG_NTFS_DEBUG=y<BR>CONFIG_NTFS_RW=y<BR><BR>#<BR>#
Pseudo
filesystems<BR>#<BR>CONFIG_PROC_FS=y<BR>CONFIG_PROC_KCORE=y<BR>CONFIG_SYSFS=y<BR>#
CONFIG_DEVPTS_FS_XATTR is not set<BR>CONFIG_TMPFS=y<BR># CONFIG_TMPFS_XATTR is
not set<BR># CONFIG_HUGETLB_PAGE is not set<BR>CONFIG_RAMFS=y<BR><BR>#<BR>#
Miscellaneous filesystems<BR>#<BR># CONFIG_ADFS_FS is not set<BR>#
CONFIG_AFFS_FS is not set<BR># CONFIG_HFS_FS is not set<BR># CONFIG_HFSPLUS_FS
is not set<BR># CONFIG_BEFS_FS is not set<BR># CONFIG_BFS_FS is not set<BR>#
CONFIG_EFS_FS is not set<BR># CONFIG_CRAMFS is not set<BR># CONFIG_VXFS_FS is
not set<BR># CONFIG_HPFS_FS is not set<BR># CONFIG_QNX4FS_FS is not set<BR>#
CONFIG_SYSV_FS is not set<BR># CONFIG_UFS_FS is not set<BR><BR>#<BR># Network
File Systems<BR>#<BR>CONFIG_NFS_FS=y<BR># CONFIG_NFS_V3 is not set<BR>#
CONFIG_NFS_V4 is not set<BR># CONFIG_NFS_DIRECTIO is not set<BR># CONFIG_NFSD is
not
set<BR>CONFIG_ROOT_NFS=y<BR>CONFIG_LOCKD=y<BR>CONFIG_NFS_COMMON=y<BR>CONFIG_SUNRPC=y<BR>#
CONFIG_RPCSEC_GSS_KRB5 is not set<BR># CONFIG_RPCSEC_GSS_SPKM3 is not set<BR>#
CONFIG_SMB_FS is not set<BR># CONFIG_CIFS is not set<BR># CONFIG_NCP_FS is not
set<BR># CONFIG_CODA_FS is not set<BR># CONFIG_AFS_FS is not set<BR><BR>#<BR>#
Partition Types<BR>#<BR>CONFIG_PARTITION_ADVANCED=y<BR># CONFIG_ACORN_PARTITION
is not set<BR># CONFIG_OSF_PARTITION is not set<BR># CONFIG_AMIGA_PARTITION is
not set<BR># CONFIG_ATARI_PARTITION is not set<BR># CONFIG_MAC_PARTITION is not
set<BR>CONFIG_MSDOS_PARTITION=y<BR># CONFIG_BSD_DISKLABEL is not set<BR>#
CONFIG_MINIX_SUBPARTITION is not set<BR>CONFIG_SOLARIS_X86_PARTITION=y<BR>#
CONFIG_UNIXWARE_DISKLABEL is not
set<BR>CONFIG_LDM_PARTITION=y<BR>CONFIG_LDM_DEBUG=y<BR># CONFIG_SGI_PARTITION is
not set<BR># CONFIG_ULTRIX_PARTITION is not set<BR># CONFIG_SUN_PARTITION is not
set<BR># CONFIG_EFI_PARTITION is not set<BR><BR>#<BR># Native Language
Support<BR>#<BR>CONFIG_NLS=y<BR>CONFIG_NLS_DEFAULT="iso8859-1"<BR>#
CONFIG_NLS_CODEPAGE_437 is not set<BR># CONFIG_NLS_CODEPAGE_737 is not set<BR>#
CONFIG_NLS_CODEPAGE_775 is not set<BR># CONFIG_NLS_CODEPAGE_850 is not set<BR>#
CONFIG_NLS_CODEPAGE_852 is not set<BR># CONFIG_NLS_CODEPAGE_855 is not set<BR>#
CONFIG_NLS_CODEPAGE_857 is not set<BR># CONFIG_NLS_CODEPAGE_860 is not set<BR>#
CONFIG_NLS_CODEPAGE_861 is not set<BR># CONFIG_NLS_CODEPAGE_862 is not set<BR>#
CONFIG_NLS_CODEPAGE_863 is not set<BR># CONFIG_NLS_CODEPAGE_864 is not set<BR>#
CONFIG_NLS_CODEPAGE_865 is not set<BR># CONFIG_NLS_CODEPAGE_866 is not set<BR>#
CONFIG_NLS_CODEPAGE_869 is not set<BR>CONFIG_NLS_CODEPAGE_936=y<BR>#
CONFIG_NLS_CODEPAGE_950 is not set<BR># CONFIG_NLS_CODEPAGE_932 is not set<BR>#
CONFIG_NLS_CODEPAGE_949 is not set<BR># CONFIG_NLS_CODEPAGE_874 is not set<BR>#
CONFIG_NLS_ISO8859_8 is not set<BR># CONFIG_NLS_CODEPAGE_1250 is not set<BR>#
CONFIG_NLS_CODEPAGE_1251 is not set<BR># CONFIG_NLS_ASCII is not set<BR>#
CONFIG_NLS_ISO8859_1 is not set<BR># CONFIG_NLS_ISO8859_2 is not set<BR>#
CONFIG_NLS_ISO8859_3 is not set<BR># CONFIG_NLS_ISO8859_4 is not set<BR>#
CONFIG_NLS_ISO8859_5 is not set<BR># CONFIG_NLS_ISO8859_6 is not set<BR>#
CONFIG_NLS_ISO8859_7 is not set<BR># CONFIG_NLS_ISO8859_9 is not set<BR>#
CONFIG_NLS_ISO8859_13 is not set<BR># CONFIG_NLS_ISO8859_14 is not set<BR>#
CONFIG_NLS_ISO8859_15 is not set<BR># CONFIG_NLS_KOI8_R is not set<BR>#
CONFIG_NLS_KOI8_U is not set<BR># CONFIG_NLS_UTF8 is not set<BR><BR>#<BR>#
Library routines<BR>#<BR># CONFIG_CRC_CCITT is not set<BR>CONFIG_CRC32=y<BR>#
CONFIG_LIBCRC32C is not set<BR><BR>#<BR># Profiling support<BR>#<BR>#
CONFIG_PROFILING is not set<BR><BR>#<BR># Kernel hacking<BR>#<BR>#
CONFIG_PRINTK_TIME is not set<BR># CONFIG_DEBUG_KERNEL is not
set<BR>CONFIG_LOG_BUF_SHIFT=14<BR># CONFIG_SERIAL_TEXT_DEBUG is not
set<BR><BR>#<BR># Security options<BR>#<BR># CONFIG_KEYS is not set<BR>#
CONFIG_SECURITY is not set<BR><BR>#<BR># Cryptographic options<BR>#<BR>#
CONFIG_CRYPTO is not set<BR><BR>#<BR># Hardware crypto
devices<BR>#<BR>#-----------------config file end
here------------------------<BR><BR><BR>Kernel boot message and opp
steps:<BR><BR>
################################################################# <BR><BR><BR>U-Boot
1.1.2(pq3-20040622-0) (Sep 27 2004 -
16:46:03) <BR>
########################################################## <BR><BR>
Core: E500, Version: 2.0,
(0x80200020) <BR>done <BR>Bytes
transferred = 1292138 (13b76a hex)rsion:
2.0,<BR>(0x80300020) <BR>MPC8540SK=>
bootm 400000 ff800000locks: CPU: 833
MHz <BR>##
Booting image at 00400000
...Hz <BR> <BR>
Image Name:
Linux-2.6.13 <BR>
LBC<BR> Image Type: PowerPC Linux Kernel Image (gzip
compressed)che
32KB<BR>enabled. <BR>
Data Size: 1292074 Bytes = 1.2
MBev.<BR>B. <BR>
Load Address: 00000000ot Flash is
U13 <BR> Entry
Point: 00000000I1: 32
bit <BR>
Image Type: PowerPC Linux RAMDisk Image (gzip
compressed) <BR>
Net: MOTO ENET0: PHY is Marvell 88E111<BR> Data
Size: 4710501 Bytes = 4.5
MB <BR> <BR>
Load Address: 00000000l 88E1111S
(1410cc1) <BR> Entry Point:
00000000 <BR>
Verifying Checksum ... OK is Realtek RTL8201CP (8201)<BR> Loading
Ramdisk to 07750000, end 07bce065 ...
OK <BR>
MOTO ENET0, MOTO ENET1, MOTO ENET2<BR>Memory CAM mapping: CAM0=64Mb, CAM1=64Mb,
CAM2=0Mb residual: 0Mbp
autoboot: <BR>0 <BR><BR>MPC8540SK=> <BR>Linux
version 2.6.13 (root@mqy-linux) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.0,<BR>full
duplex <BR>Using
MOTO ENET0
de <BR>Freeing
initrd memory: 4600k freed<BR> DRAM:
Initializing <BR>NET: Registered
protocol family
16 <BR>
DDR: 128 MB<BR>PCI: Probing PCI hardwareSH: 8
MB <BR>NTFS
driver 2.1.23 [Flags: R/W
DEBUG]. <BR>
In: serial <BR>Generic RTC Driver
v1.07
serial <BR>Serial:
8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabledrvell<BR>88E1111S
(1410cc1) <BR>ttyS0
at MMIO 0xe0004500 (irq = 26) is a
16550A88E1111S<BR>(1410cc1) <BR>ttyS1
at MMIO 0xe0004600 (irq = 26) is a 16550AET2: PHY is Realtek
RTL8201CP<BR>(8201) <BR>io
scheduler noop
registered <BR> <BR>io
scheduler anticipatory
registered <BR>io
scheduler deadline registeredboot:
0 <BR>io
scheduler cfq registered00000
uImage <BR>RAMDISK
driver initialized: 16 RAM disks of 32768K size 1024<BR>Using MOTO ENET0
device <BR> <BR>eth1:
Gianfar Ethernet Controller Version
1.1,<BR>00:e0:0c:40:01:03#################################################### <BR> <BR>eth1:
Running with NAPI
enabled <BR><BR>eth1:
256/256 RX/TX BD ring size################################<BR>eth2: Gianfar
Ethernet Controller Version
1.1,<BR>00:e0:0c:40:02:03 <BR>
####################################<BR>eth2: Running with NAPI
enabled <BR>eth2:
256/256 RX/TX BD ring sizensferred = 1264114 (1349f2 hex)<BR>Uniform
Multi-Platform E-IDE driver Revision: 7.00alpha2
4000000<BR>ff800000 <BR>##
B<BR>ide: Assuming 33MHz system bus speed for
P <BR>Bad
Magic
Nu <BR>
ide2: BM-DMA at 0xffffd0-0xffffd7, BIOS settings:
hde:pio,<BR>hdf:pio <BR>
Load Address:
00000000 <BR>
ide3: BM-DMA at 0xffffd8-0xffffdf, BIOS settings: hdg:pio,<BR>hdh:piohecksum ...
OK <BR>
Uncompressing Kernel Ima<BR>hde: QUANTUM FIREBALL CR8.4A, ATA DISK drive<BR>##
Loading RAMDisk Image at ff800000 ... <BR>ide2 at
0xfffff8-0xffffff,0xfffff6 on irq 50e Name:
MPC85xx<BR>ramdisk <BR>hde:
max request size: 128KiB PowerPC Linux RAMDisk Image<BR>hde: lost
interrupt <BR>hde:
lost
interrupt <BR>hde:
lost interrupt710501 Bytes = 4.5<BR>hde: lost
interrupt <BR>PDC202XX:
Primary channel reset.ux version 2.6.13 (root@mqy-linu<BR>hde: DMA interrupt
recoveryELDK 3.1.1
3.3.3- <BR>hde: lost
interrupt <BR> hde1 <BR>i2c
/dev entries driver #11 Sun Sep 4 12:52:07<BR>NET: Registered protocol family
2 <BR>Built 1
zonelists <BR>IP route cache hash table entries: 2048
(order: 1, 8192
bytes)<BR>0,115200 <BR>TCP
established hash table entries: 8192 (order: 4,
65536<BR>bytes) <BR>PID
h<BR>TCP bind hash table entries: 8192 (order: 3,
32768<BR>bytes) <BR>Dentry
cache<BR>TCP: Hash tables configured
(e <BR>RAMDISK:
Compressed image found at block
0 <BR>Mount-cache
ha<BR>VFS: Mounted root (ext2
filesystem). <BR>checking
if imag<BR>Freeing unused kernel memory: 336k init); looks like an
initrd <BR>INIT:
version 2.78
booting <BR>INIT:
Entering runlevel: 2emory: 4600k
freed <BR><BR>Welcome to Linux on
Puff!NET: Registered protocol<BR>PuffLinux login:
root <BR>PuffLinux:root$cat
/proc/partitions <BR><BR>33
0
hde <BR>33 1
hde1 <BR>PuffLinux:root$cd
/dev<BR>PuffLinux:dev$mknod hde b 33 0<BR>PuffLinux:dev$mknod hde1 b 33
1<BR>PuffLinux:dev$mount /dev/hde1 /mnt<BR>hde: dma_timer_expiry: dma status ==
0x24<BR>PDC202XX: Primary channel reset.<BR>hde: DMA interrupt recovery<BR>hde:
lost interrupt<BR>hde: dma_timer_expiry: dma status == 0x24<BR>PDC202XX: Primary
channel reset.<BR>hde: DMA interrupt recovery<BR>hde: lost interrupt<BR>hde:
dma_timer_expiry: dma status == 0x24<BR>PDC202XX: Primary channel reset.<BR>hde:
DMA interrupt recovery<BR>hde: lost interrupt<BR>hde: dma_timer_expiry: dma
status == 0x24<BR>PDC202XX: Primary channel reset.<BR>hde: DMA interrupt
recovery<BR>hde: lost interrupt<BR>FAT: codepage cp437 not found<BR>mount: wrong
fs type, bad option, bad superblock on
/dev/hde1,<BR> or too many mounted file
systems<BR>PuffLinux:dev$<BR></FONT></P></BODY></HTML>