<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Schaefer-Hutter, Peter wrote:
<blockquote
cite="mid8E342283C2100540AAC5D103097054776F851C@rcexc.racoms.loc"
type="cite">
<pre wrap="">Hello Vitaly,
</pre>
<blockquote type="cite">
<pre wrap="">From: Vitaly Bordug [<a class="moz-txt-link-freetext" href="mailto:vbordug@ru.mvista.com">mailto:vbordug@ru.mvista.com</a>]
Mentioned support should work `out-of-the box`.
Make sure you have console=ttyCPM0,115200 (or whatever baudrate you
have) within bootargs in the U-Boot environment. U-Boot modification
</pre>
</blockquote>
<pre wrap=""><!---->is
</pre>
<blockquote type="cite">
<pre wrap="">needed only if you wish to have both FEC MAC addresses configured via
U-Boot env as well. Also only the related defconfig should be used.
</pre>
</blockquote>
<pre wrap=""><!---->
I have the bootargs, but still nogo - even with the mpc885ads_defconfig.
Besides, in the mpc885ads_defconfig CONFIG_SCC3_ENET is set but in the
patch
description it reads as if only SCC1 is supported...
Best Regards,
Peter
</pre>
</blockquote>
The board does not hang - there's somithing with console since you
don't see anything. Try to change BCSR_ADDR from 0xf4500000 to
0xf80...0 - the newer version of the boards may have this changed.<br>
<br>
<br>
<pre class="moz-signature" cols="72">--
Sincerely,
Vitaly
</pre>
</body>
</html>