<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<TITLE></TITLE>
<META content="MSHTML 6.00.2900.2668" name=GENERATOR></HEAD>
<BODY><!-- Converted from text/plain format -->
<P>Hello, team<BR> I'm testing the
2.6.13-rc3 kernel on my board, all is work well except<BR>the FEC.<BR><FONT
color=#00ff00>Board type: PQ3SK
REVB<BR>Kernel :
2.6.13-rc3<BR>toolchain : ELDK 3.1.1<BR>PHY type :
Marvell 88E1111S<BR></FONT><BR>
Compile with "make mpc8540ads_defconfig", change with nothing.<BR>download
uImage file into my board and boot with it, all is ok ! But when<BR>I config the
eth0 , it can't work , same with eth1, both of them are Giga-eth,<BR>but eth2 is
work well, and eth2 is a
10/100-eth.<BR> I checked the
8540ADS's hardware message , it's use 88E1011 PHY<BR>not 88E1111 PHY . And I
checked the kernel code "<FONT color=#0000ff><EM>
driver/net/gianfar_phy.c</EM></FONT>"<BR>it takes 88E1011 and 88E1111 as same
PHY , so I think this is not a hardware<BR>problem, and my board work well
with a 2.4.18 DEMO kernel.<BR> Here is
the output message of 2.6.13-rc3 kernel:<BR><BR><FONT
color=#0000ff>PuffLinux:root$ifconfig eth0 192.168.1.77<BR>eth0: PHY is Generic
MII (ffffffff)<BR></FONT><BR> If the
PHY config is correct it will recognize my PHY ID, but here is a<BR> wrong
ID number ffffffff .<BR><BR> Please
help me solve this problem!<BR><BR>Thanks a
lot!<BR><BR>
KylongMu<BR><BR></P></BODY></HTML>