<div>Hi, </div>
<div> We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI interface. The old kernel on the boards worked quite well with Vxworks BSP and Linux 2.4.2 kernel. But it failed to boot with the new kernel version
2.6.8(I had tested other versions too). Here is the message I got from the HyperTerminal.</div>
<div> </div>
<div>-------------------------------------------------------------</div>
<div>Attaching to ATA disk device... done.<br>Loading /ata0/tftpboot/zImage.elf...1425876<br>Starting at 0x800000...</div>
<div><br>id mach(): done</div>
<div>
<p>MMU:enter</p>
<p>MMU:hw init</p>
<p>hash:enter</p>
<p>hash:find piece</p>
<p>hash:patch</p>
<p>hash:done</p>
<p>MMU:mapin</p>
<p>MMU:setio</p>
<p>MMU:exit</p>
<p>setup_arch: enter</p>
<p>setup_arch: bootmem</p>
<p>arch: exit</p>
<p>-----------------------------------</p>
<p>What's the problems of these failure?</p>
<p>Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards?</p></div>
<div> Thanks in advanced!</div>
<div> </div>
<div> Jianjie Ma</div>
<div> 2005.6.27<br> </div>