U-Boot 1.0.2 (Apr 29 2004 - 11:17:37)

MPC8260 Reset Status: External Soft, External Hard

MPC8260 Clock Configuration
 - Bus-to-Core Mult 2x, VCO Div 2, 60x Bus Freq  50-150, Core Freq 100-300
 - dfbrg 1, corecnf 0x04, busdf 3, cpmdf 1, plldf 0, pllmf 1
 - vco_out  264000000, scc_clk   66000000, brg_clk   16500000
 - cpu_clk  132000000, cpm_clk  132000000, bus_clk   66000000

CPU:   MPC8260 (HiP3 Rev 01, Mask B.3 3K23A) at 132 MHz
Board: Motorola MPC8260ADS
DRAM:  128 MB
In:    serial
Out:   serial
Err:   serial
DOC:   DiskOnChip Millennium @ 0xFC000000, 32 MB
Net:   FCC3 ETHERNET
Hit any key to stop autoboot:  0

=> bootm 2000000 3000000
checkpoint # 1
## Booting image at 02000000 ...
checkpoint # 2
checkpoint # 3
   Image Name:   IMAS Remote load at 0 entry at c
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    817534 Bytes = 798.4 kB
   Load Address: 00000000
   Entry Point:  0000000c
   Verifying Checksum ... OK
checkpoint # 4
checkpoint # 5
checkpoint # 6
   Uncompressing Kernel Image ... OK
checkpoint # 7
checkpoint # 8
checkpoint # 9
## Current stack ends at 0x07BC5788 => set upper limit to 0x00800000
bd info to linux 0x007ffeb0 uboot copy at 0x07bc5790
## cmdline at 0x007FFF00 ... 0x007FFF23

cmdline:root=/dev/ram rw console=ttyS3,9600
bd address  = 0x07BC5AB4
memstart    = 0x00000000
memsize     = 0x08000000
flashstart  = 0x00000000
flashsize   = 0x00000000
flashoffset = 0x00000000
sramstart   = 0x00000000
sramsize    = 0x00000000
immr_base   = 0xFA200000
bootflags   = 0x00000001
vco         =    264 MHz
sccfreq     =     66 MHz
brgfreq     = 16.500 MHz
intfreq     =    132 MHz
cpmfreq     =    132 MHz
busfreq     =     66 MHz
ethaddr     = 00:90:8E:AB:7C:C4
IP addr     = 192.168.116.66
baudrate    =   9600 bps

## initrd at 0x03000040 ... 0x03186B6A (len=1600299=0x186B2B)
   Loading Ramdisk to 07a3e000, end 07bc4b2b ... OK
## Transferring control to Linux (at address 0000000c) ...
checkpoint # 15
À!p À!p @ÀÀ!pPÀ!pP@À!p 

spew .... spew ... spew