linux 2.6 boot failure with rfs installed in the flash disk (xupv2p + ppc)

saadia dhouib saadia_dhouib at yahoo.fr
Tue Nov 4 05:27:30 EST 2008


Finally I created a node for ttyUL0 in /dev
mknod /dev/ttyUL0 c 5 0
mknod /dev/console c 5 1

Then I modified /etc/inittab (from klingauf mkrootfs), I replaced the line
:12345:respawn:/sbin/getty 9600 tts/0
by 
ttyUL0:12345:respawn:/sbin/getty -L ttyUL0 9600 vt100

Then I rebooted the kernel, and there were errors:

zImage starting: loaded at 0x00400000 (sp: 0x0059eefc)
Allocating 0x377124 bytes for kernel ...
gunzipping (0x00000000 <- 0x0040c000:0x0059d133)...done 0x3545e8 bytes

Linux/PowerPC load: console=ttyUL0,9600 root=/dev/xsa3 rw
Finalizing device tree... flat tree at 0x40ae18
Using Xilinx Virtex machine description
Linux version 2.6.27-rc9 (dhouib at lo-lester-030) (gcc version 3.4.5) #29
PREEMPT Mon Nov 3 16:23:09 CET 2008
Zone PFN ranges:
  DMA      0x00000000 -> 0x00010000
  Normal   0x00010000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00010000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyUL0,9600 root=/dev/xsa3 rw
Xilinx intc at 0x41200000 mapped to 0xfdfff000
PID hash table entries: 1024 (order: 10, 4096 bytes)
clocksource: timebase mult[d55555] shift[22] registered
Console: colour dummy device 80x25
console [ttyUL0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256000k/262144k available (3256k kernel code, 5832k reserved, 128k
data, 136k bss, 160k init)
Calibrating delay loop... 598.01 BogoMIPS (lpj=1196032)
Mount-cache hash table entries: 512
net_namespace: 756 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
msgmni has been set to 500
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
40600000.serial: ttyUL0 at MMIO 0x40600003 (irq = 16) is a uartlite
brd: module loaded
loop: module loaded
xsysace 41800000.sysace: Xilinx SystemACE revision 1.0.12
xsysace 41800000.sysace: capacity: 3940272 sectors
 xsa: xsa1 xsa2 xsa3
Xilinx SystemACE device driver, major=254
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 160k init
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: transfer failure
xsysace 41800000.sysace:     ctrl:  0000038a  seccnt/cmd: 0308      ver:100c
    status:0017e31a  mpu_lba:001f91e5  busmode:   1
    error: 00000014  cfg_lba:00000000  fatstat:0000
xsysace 41800000.sysace: transfer failure
xsysace 41800000.sysace:     ctrl:  0000038a  seccnt/cmd: 0308      ver:100c
    status:0017e31a  mpu_lba:001f91e5  busmode:   1
    error: 00000014  cfg_lba:00000000  fatstat:0000
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128
xsysace 41800000.sysace: kicking stalled fsm; state=8 task=2 iter=12 dc=128



Could someone help me please?
Thanks


-- 
View this message in context: http://www.nabble.com/linux-2.6-boot-failure-with-rfs-installed-in-the-flash-disk-%28xupv2p-%2B-ppc%29-tp20306038p20307909.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.



More information about the Linuxppc-embedded mailing list