PPC 440GX with NS DP83865 phy

[Matt Porter]

On Thu, Mar 10, 2005 at 08:03:56AM -0800, Eugene Surovegin wrote:
> On Thu, Mar 10, 2005 at 11:06:53AM +0100, Gerhard Jaeger wrote:
> > the patch has been posted in October last year (wow, thought it was in
> > december or so):
> > http://ozlabs.org/pipermail/linuxppc-embedded/2004-October/015811.html
> > 
> > I think it needs some cleanup to apply correctly, but the issue is still
> > the same -  the RGMII bridge needs to be setup again after the EMAC has 
> > been reset. This problem occurs, when the speed is != 100Mbs, then
> > the clocking for the phy is not correct. 
> > I have attached an updated patch, which first checks the PHY speed, then
> > according to that speed the RGMII and ZMII will be setup...
> 
> [snip]
> 
> OK, from quick look it seems that this is infamous problem with PHYs 
> which don't generate Rx clock if there is no link.

Ok, good, I was just looking an wondering if it was the same issue. 

> Current driver works sometimes probably just by luck.
> 
> Gerhard, there is an experimental NAPI driver for 4xx at 
> http://kernel.ebshome.net (for current 2.4 & 2.6 BK trees). I recently 
> added full 440GX support. We (Matt and I) are thinking about 
> scraping the current driver and using my new version sometimes in the 
> future. It'd be great if you could find some time and try this new 
> driver on your board. Enable "PHY Rx clock workaround" in driver 
> config.

In the meantime, I'll see how this work-around works on some platforms
I have here.

Gerhard: what's the list of 4xx systems (and phys) you have tested
this against? I assume this patch is used on all 4xx platforms you
support in your distro?