[PATCH] powerpc: Drop MPC5200 LocalPlus bus FIFO driver
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Thu Apr 13 16:16:42 AEST 2023
While mpc5200b.dtsi contains a device that this driver can bind to, the
only purpose of a bound device is to be used by the four exported functions
mpc52xx_lpbfifo_submit(), mpc52xx_lpbfifo_abort(), mpc52xx_lpbfifo_poll()
and mpc52xx_lpbfifo_start_xfer(). However there are no callers to this
function and so the driver is effectively superfluous and can be deleted.
Also drop some defines and a struct from <asm/mpc52xx.h> that are unused
now together with the declarations of the four mentioned functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello Michael,
On Thu, Apr 13, 2023 at 10:11:25AM +1000, Michael Ellerman wrote:
> Uwe Kleine-König <u.kleine-koenig at pengutronix.de> writes:
> > On Wed, Dec 28, 2022 at 03:51:29PM +0100, Uwe Kleine-König wrote:
> >> The four exported functions mpc52xx_lpbfifo_submit(),
> >> mpc52xx_lpbfifo_abort(), mpc52xx_lpbfifo_poll(), and
> >> mpc52xx_lpbfifo_start_xfer() are not used. So they can be dropped and the
> >> definitions needed to call them can be moved into the driver file.
> >>
> >> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> >
> > I never got feedback about this driver and it has not appeared in next
> > up to now. Did it fell through the cracks?
>
> Yeah. I was hoping someone would explain what's going on with the
> driver.
>
> Presumably there are some out-of-tree drivers that use the routines
> provided by this driver?
I googled for the function names but the only related hits were
references to this thread :-)
> I think rather than merging this patch, which keeps the code but makes
> it completely useless, do you mind sending a patch to remove the whole
> driver? Maybe that will get someone's attention.
fair enough, here it is.
Best regards
Uwe
arch/powerpc/include/asm/mpc52xx.h | 41 --
arch/powerpc/platforms/52xx/Kconfig | 5 -
arch/powerpc/platforms/52xx/Makefile | 2 -
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 594 ------------------
4 files changed, 642 deletions(-)
delete mode 100644 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 5ea16a71c2f0..01ae6c351e50 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -285,47 +285,6 @@ extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period,
extern u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt);
extern int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt);
-/* mpc52xx_lpbfifo.c */
-#define MPC52XX_LPBFIFO_FLAG_READ (0)
-#define MPC52XX_LPBFIFO_FLAG_WRITE (1<<0)
-#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT (1<<1)
-#define MPC52XX_LPBFIFO_FLAG_NO_DMA (1<<2)
-#define MPC52XX_LPBFIFO_FLAG_POLL_DMA (1<<3)
-
-struct mpc52xx_lpbfifo_request {
- struct list_head list;
-
- /* localplus bus address */
- unsigned int cs;
- size_t offset;
-
- /* Memory address */
- void *data;
- phys_addr_t data_phys;
-
- /* Details of transfer */
- size_t size;
- size_t pos; /* current position of transfer */
- int flags;
- int defer_xfer_start;
-
- /* What to do when finished */
- void (*callback)(struct mpc52xx_lpbfifo_request *);
-
- void *priv; /* Driver private data */
-
- /* statistics */
- int irq_count;
- int irq_ticks;
- u8 last_byte;
- int buffer_not_done_cnt;
-};
-
-extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req);
-extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req);
-extern void mpc52xx_lpbfifo_poll(void);
-extern int mpc52xx_lpbfifo_start_xfer(struct mpc52xx_lpbfifo_request *req);
-
/* mpc52xx_pic.c */
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index b72ed2950ca8..384e4bef2c28 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -54,8 +54,3 @@ config PPC_MPC5200_BUGFIX
for MPC5200B based boards.
It is safe to say 'Y' here
-
-config PPC_MPC5200_LPBFIFO
- tristate "MPC5200 LocalPlus bus FIFO driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select PPC_BESTCOMM_GEN_BD
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index f40d48eab779..1b1f72d83342 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -14,5 +14,3 @@ obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
ifdef CONFIG_PPC_LITE5200
obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o
endif
-
-obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
deleted file mode 100644
index 6d1dd6e87478..000000000000
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ /dev/null
@@ -1,594 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * LocalPlus Bus FIFO driver for the Freescale MPC52xx.
- *
- * Copyright (C) 2009 Secret Lab Technologies Ltd.
- *
- * Todo:
- * - Add support for multiple requests to be queued.
- */
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/mpc52xx.h>
-#include <asm/time.h>
-
-#include <linux/fsl/bestcomm/bestcomm.h>
-#include <linux/fsl/bestcomm/bestcomm_priv.h>
-#include <linux/fsl/bestcomm/gen_bd.h>
-
-MODULE_AUTHOR("Grant Likely <grant.likely at secretlab.ca>");
-MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");
-MODULE_LICENSE("GPL");
-
-#define LPBFIFO_REG_PACKET_SIZE (0x00)
-#define LPBFIFO_REG_START_ADDRESS (0x04)
-#define LPBFIFO_REG_CONTROL (0x08)
-#define LPBFIFO_REG_ENABLE (0x0C)
-#define LPBFIFO_REG_BYTES_DONE_STATUS (0x14)
-#define LPBFIFO_REG_FIFO_DATA (0x40)
-#define LPBFIFO_REG_FIFO_STATUS (0x44)
-#define LPBFIFO_REG_FIFO_CONTROL (0x48)
-#define LPBFIFO_REG_FIFO_ALARM (0x4C)
-
-struct mpc52xx_lpbfifo {
- struct device *dev;
- phys_addr_t regs_phys;
- void __iomem *regs;
- int irq;
- spinlock_t lock;
-
- struct bcom_task *bcom_tx_task;
- struct bcom_task *bcom_rx_task;
- struct bcom_task *bcom_cur_task;
-
- /* Current state data */
- struct mpc52xx_lpbfifo_request *req;
- int dma_irqs_enabled;
-};
-
-/* The MPC5200 has only one fifo, so only need one instance structure */
-static struct mpc52xx_lpbfifo lpbfifo;
-
-/**
- * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transferred
- *
- * @req: Pointer to request structure
- */
-static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
-{
- size_t transfer_size = req->size - req->pos;
- struct bcom_bd *bd;
- void __iomem *reg;
- u32 *data;
- int i;
- int bit_fields;
- int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
- int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
- int poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA;
-
- /* Set and clear the reset bits; is good practice in User Manual */
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
-
- /* set master enable bit */
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000001);
- if (!dma) {
- /* While the FIFO can be setup for transfer sizes as large as
- * 16M-1, the FIFO itself is only 512 bytes deep and it does
- * not generate interrupts for FIFO full events (only transfer
- * complete will raise an IRQ). Therefore when not using
- * Bestcomm to drive the FIFO it needs to either be polled, or
- * transfers need to constrained to the size of the fifo.
- *
- * This driver restricts the size of the transfer
- */
- if (transfer_size > 512)
- transfer_size = 512;
-
- /* Load the FIFO with data */
- if (write) {
- reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
- data = req->data + req->pos;
- for (i = 0; i < transfer_size; i += 4)
- out_be32(reg, *data++);
- }
-
- /* Unmask both error and completion irqs */
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000301);
- } else {
- /* Choose the correct direction
- *
- * Configure the watermarks so DMA will always complete correctly.
- * It may be worth experimenting with the ALARM value to see if
- * there is a performance impact. However, if it is wrong there
- * is a risk of DMA not transferring the last chunk of data
- */
- if (write) {
- out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1e4);
- out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 7);
- lpbfifo.bcom_cur_task = lpbfifo.bcom_tx_task;
- } else {
- out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1ff);
- out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 0);
- lpbfifo.bcom_cur_task = lpbfifo.bcom_rx_task;
-
- if (poll_dma) {
- if (lpbfifo.dma_irqs_enabled) {
- disable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task));
- lpbfifo.dma_irqs_enabled = 0;
- }
- } else {
- if (!lpbfifo.dma_irqs_enabled) {
- enable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task));
- lpbfifo.dma_irqs_enabled = 1;
- }
- }
- }
-
- bd = bcom_prepare_next_buffer(lpbfifo.bcom_cur_task);
- bd->status = transfer_size;
- if (!write) {
- /*
- * In the DMA read case, the DMA doesn't complete,
- * possibly due to incorrect watermarks in the ALARM
- * and CONTROL regs. For now instead of trying to
- * determine the right watermarks that will make this
- * work, just increase the number of bytes the FIFO is
- * expecting.
- *
- * When submitting another operation, the FIFO will get
- * reset, so the condition of the FIFO waiting for a
- * non-existent 4 bytes will get cleared.
- */
- transfer_size += 4; /* BLECH! */
- }
- bd->data[0] = req->data_phys + req->pos;
- bcom_submit_next_buffer(lpbfifo.bcom_cur_task, NULL);
-
- /* error irq & master enabled bit */
- bit_fields = 0x00000201;
-
- /* Unmask irqs */
- if (write && (!poll_dma))
- bit_fields |= 0x00000100; /* completion irq too */
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, bit_fields);
- }
-
- /* Set transfer size, width, chip select and READ mode */
- out_be32(lpbfifo.regs + LPBFIFO_REG_START_ADDRESS,
- req->offset + req->pos);
- out_be32(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, transfer_size);
-
- bit_fields = req->cs << 24 | 0x000008;
- if (!write)
- bit_fields |= 0x010000; /* read mode */
- out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, bit_fields);
-
- /* Kick it off */
- if (!lpbfifo.req->defer_xfer_start)
- out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
- if (dma)
- bcom_enable(lpbfifo.bcom_cur_task);
-}
-
-/**
- * mpc52xx_lpbfifo_irq - IRQ handler for LPB FIFO
- * @irq: IRQ number to be handled
- * @dev_id: device ID cookie
- *
- * On transmit, the dma completion irq triggers before the fifo completion
- * triggers. Handle the dma completion here instead of the LPB FIFO Bestcomm
- * task completion irq because everything is not really done until the LPB FIFO
- * completion irq triggers.
- *
- * In other words:
- * For DMA, on receive, the "Fat Lady" is the bestcom completion irq. on
- * transmit, the fifo completion irq is the "Fat Lady". The opera (or in this
- * case the DMA/FIFO operation) is not finished until the "Fat Lady" sings.
- *
- * Reasons for entering this routine:
- * 1) PIO mode rx and tx completion irq
- * 2) DMA interrupt mode tx completion irq
- * 3) DMA polled mode tx
- *
- * Exit conditions:
- * 1) Transfer aborted
- * 2) FIFO complete without DMA; more data to do
- * 3) FIFO complete without DMA; all data transferred
- * 4) FIFO complete using DMA
- *
- * Condition 1 can occur regardless of whether or not DMA is used.
- * It requires executing the callback to report the error and exiting
- * immediately.
- *
- * Condition 2 requires programming the FIFO with the next block of data
- *
- * Condition 3 requires executing the callback to report completion
- *
- * Condition 4 means the same as 3, except that we also retrieve the bcom
- * buffer so DMA doesn't get clogged up.
- *
- * To make things trickier, the spinlock must be dropped before
- * executing the callback, otherwise we could end up with a deadlock
- * or nested spinlock condition. The out path is non-trivial, so
- * extra fiddling is done to make sure all paths lead to the same
- * outbound code.
- *
- * Return: irqreturn code (%IRQ_HANDLED)
- */
-static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id)
-{
- struct mpc52xx_lpbfifo_request *req;
- u32 status = in_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
- void __iomem *reg;
- u32 *data;
- int count, i;
- int do_callback = 0;
- u32 ts;
- unsigned long flags;
- int dma, write, poll_dma;
-
- spin_lock_irqsave(&lpbfifo.lock, flags);
- ts = mftb();
-
- req = lpbfifo.req;
- if (!req) {
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- pr_err("bogus LPBFIFO IRQ\n");
- return IRQ_HANDLED;
- }
-
- dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
- write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
- poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA;
-
- if (dma && !write) {
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- pr_err("bogus LPBFIFO IRQ (dma and not writing)\n");
- return IRQ_HANDLED;
- }
-
- if ((status & 0x01) == 0) {
- goto out;
- }
-
- /* check abort bit */
- if (status & 0x10) {
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
- do_callback = 1;
- goto out;
- }
-
- /* Read result from hardware */
- count = in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
- count &= 0x00ffffff;
-
- if (!dma && !write) {
- /* copy the data out of the FIFO */
- reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
- data = req->data + req->pos;
- for (i = 0; i < count; i += 4)
- *data++ = in_be32(reg);
- }
-
- /* Update transfer position and count */
- req->pos += count;
-
- /* Decide what to do next */
- if (req->size - req->pos)
- mpc52xx_lpbfifo_kick(req); /* more work to do */
- else
- do_callback = 1;
-
- out:
- /* Clear the IRQ */
- out_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS, 0x01);
-
- if (dma && (status & 0x11)) {
- /*
- * Count the DMA as complete only when the FIFO completion
- * status or abort bits are set.
- *
- * (status & 0x01) should always be the case except sometimes
- * when using polled DMA.
- *
- * (status & 0x10) {transfer aborted}: This case needs more
- * testing.
- */
- bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
- }
- req->last_byte = ((u8 *)req->data)[req->size - 1];
-
- /* When the do_callback flag is set; it means the transfer is finished
- * so set the FIFO as idle */
- if (do_callback)
- lpbfifo.req = NULL;
-
- if (irq != 0) /* don't increment on polled case */
- req->irq_count++;
-
- req->irq_ticks += mftb() - ts;
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
-
- /* Spinlock is released; it is now safe to call the callback */
- if (do_callback && req->callback)
- req->callback(req);
-
- return IRQ_HANDLED;
-}
-
-/**
- * mpc52xx_lpbfifo_bcom_irq - IRQ handler for LPB FIFO Bestcomm task
- * @irq: IRQ number to be handled
- * @dev_id: device ID cookie
- *
- * Only used when receiving data.
- *
- * Return: irqreturn code (%IRQ_HANDLED)
- */
-static irqreturn_t mpc52xx_lpbfifo_bcom_irq(int irq, void *dev_id)
-{
- struct mpc52xx_lpbfifo_request *req;
- unsigned long flags;
- u32 status;
- u32 ts;
-
- spin_lock_irqsave(&lpbfifo.lock, flags);
- ts = mftb();
-
- req = lpbfifo.req;
- if (!req || (req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA)) {
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- return IRQ_HANDLED;
- }
-
- if (irq != 0) /* don't increment on polled case */
- req->irq_count++;
-
- if (!bcom_buffer_done(lpbfifo.bcom_cur_task)) {
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
-
- req->buffer_not_done_cnt++;
- if ((req->buffer_not_done_cnt % 1000) == 0)
- pr_err("transfer stalled\n");
-
- return IRQ_HANDLED;
- }
-
- bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
-
- req->last_byte = ((u8 *)req->data)[req->size - 1];
-
- req->pos = status & 0x00ffffff;
-
- /* Mark the FIFO as idle */
- lpbfifo.req = NULL;
-
- /* Release the lock before calling out to the callback. */
- req->irq_ticks += mftb() - ts;
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
-
- if (req->callback)
- req->callback(req);
-
- return IRQ_HANDLED;
-}
-
-/**
- * mpc52xx_lpbfifo_poll - Poll for DMA completion
- */
-void mpc52xx_lpbfifo_poll(void)
-{
- struct mpc52xx_lpbfifo_request *req = lpbfifo.req;
- int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
- int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
-
- /*
- * For more information, see comments on the "Fat Lady"
- */
- if (dma && write)
- mpc52xx_lpbfifo_irq(0, NULL);
- else
- mpc52xx_lpbfifo_bcom_irq(0, NULL);
-}
-EXPORT_SYMBOL(mpc52xx_lpbfifo_poll);
-
-/**
- * mpc52xx_lpbfifo_submit - Submit an LPB FIFO transfer request.
- * @req: Pointer to request structure
- *
- * Return: %0 on success, -errno code on error
- */
-int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req)
-{
- unsigned long flags;
-
- if (!lpbfifo.regs)
- return -ENODEV;
-
- spin_lock_irqsave(&lpbfifo.lock, flags);
-
- /* If the req pointer is already set, then a transfer is in progress */
- if (lpbfifo.req) {
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- return -EBUSY;
- }
-
- /* Setup the transfer */
- lpbfifo.req = req;
- req->irq_count = 0;
- req->irq_ticks = 0;
- req->buffer_not_done_cnt = 0;
- req->pos = 0;
-
- mpc52xx_lpbfifo_kick(req);
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(mpc52xx_lpbfifo_submit);
-
-int mpc52xx_lpbfifo_start_xfer(struct mpc52xx_lpbfifo_request *req)
-{
- unsigned long flags;
-
- if (!lpbfifo.regs)
- return -ENODEV;
-
- spin_lock_irqsave(&lpbfifo.lock, flags);
-
- /*
- * If the req pointer is already set and a transfer was
- * started on submit, then this transfer is in progress
- */
- if (lpbfifo.req && !lpbfifo.req->defer_xfer_start) {
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- return -EBUSY;
- }
-
- /*
- * If the req was previously submitted but not
- * started, start it now
- */
- if (lpbfifo.req && lpbfifo.req == req &&
- lpbfifo.req->defer_xfer_start) {
- out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
- }
-
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(mpc52xx_lpbfifo_start_xfer);
-
-void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&lpbfifo.lock, flags);
- if (lpbfifo.req == req) {
- /* Put it into reset and clear the state */
- bcom_gen_bd_rx_reset(lpbfifo.bcom_rx_task);
- bcom_gen_bd_tx_reset(lpbfifo.bcom_tx_task);
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
- lpbfifo.req = NULL;
- }
- spin_unlock_irqrestore(&lpbfifo.lock, flags);
-}
-EXPORT_SYMBOL(mpc52xx_lpbfifo_abort);
-
-static int mpc52xx_lpbfifo_probe(struct platform_device *op)
-{
- struct resource res;
- int rc = -ENOMEM;
-
- if (lpbfifo.dev != NULL)
- return -ENOSPC;
-
- lpbfifo.irq = irq_of_parse_and_map(op->dev.of_node, 0);
- if (!lpbfifo.irq)
- return -ENODEV;
-
- if (of_address_to_resource(op->dev.of_node, 0, &res))
- return -ENODEV;
- lpbfifo.regs_phys = res.start;
- lpbfifo.regs = of_iomap(op->dev.of_node, 0);
- if (!lpbfifo.regs)
- return -ENOMEM;
-
- spin_lock_init(&lpbfifo.lock);
-
- /* Put FIFO into reset */
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
-
- /* Register the interrupt handler */
- rc = request_irq(lpbfifo.irq, mpc52xx_lpbfifo_irq, 0,
- "mpc52xx-lpbfifo", &lpbfifo);
- if (rc)
- goto err_irq;
-
- /* Request the Bestcomm receive (fifo --> memory) task and IRQ */
- lpbfifo.bcom_rx_task =
- bcom_gen_bd_rx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
- BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC,
- 16*1024*1024);
- if (!lpbfifo.bcom_rx_task)
- goto err_bcom_rx;
-
- rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task),
- mpc52xx_lpbfifo_bcom_irq, 0,
- "mpc52xx-lpbfifo-rx", &lpbfifo);
- if (rc)
- goto err_bcom_rx_irq;
-
- lpbfifo.dma_irqs_enabled = 1;
-
- /* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
- lpbfifo.bcom_tx_task =
- bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
- BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC);
- if (!lpbfifo.bcom_tx_task)
- goto err_bcom_tx;
-
- lpbfifo.dev = &op->dev;
- return 0;
-
- err_bcom_tx:
- free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
- err_bcom_rx_irq:
- bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
- err_bcom_rx:
- free_irq(lpbfifo.irq, &lpbfifo);
- err_irq:
- iounmap(lpbfifo.regs);
- lpbfifo.regs = NULL;
-
- dev_err(&op->dev, "mpc52xx_lpbfifo_probe() failed\n");
- return -ENODEV;
-}
-
-
-static int mpc52xx_lpbfifo_remove(struct platform_device *op)
-{
- if (lpbfifo.dev != &op->dev)
- return 0;
-
- /* Put FIFO in reset */
- out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
-
- /* Release the bestcomm transmit task */
- free_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task), &lpbfifo);
- bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task);
-
- /* Release the bestcomm receive task */
- free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
- bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
-
- free_irq(lpbfifo.irq, &lpbfifo);
- iounmap(lpbfifo.regs);
- lpbfifo.regs = NULL;
- lpbfifo.dev = NULL;
-
- return 0;
-}
-
-static const struct of_device_id mpc52xx_lpbfifo_match[] = {
- { .compatible = "fsl,mpc5200-lpbfifo", },
- {},
-};
-MODULE_DEVICE_TABLE(of, mpc52xx_lpbfifo_match);
-
-static struct platform_driver mpc52xx_lpbfifo_driver = {
- .driver = {
- .name = "mpc52xx-lpbfifo",
- .of_match_table = mpc52xx_lpbfifo_match,
- },
- .probe = mpc52xx_lpbfifo_probe,
- .remove = mpc52xx_lpbfifo_remove,
-};
-module_platform_driver(mpc52xx_lpbfifo_driver);
base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6
--
2.39.2
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20230413/8a15961e/attachment-0001.sig>
More information about the Linuxppc-dev
mailing list