[PATCH v1 5/7] s390/pgtable: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE

Gerald Schaefer gerald.schaefer at linux.ibm.com
Thu Mar 17 00:27:22 AEDT 2022


On Wed, 16 Mar 2022 14:01:07 +0100
Christian Borntraeger <borntraeger at linux.ibm.com> wrote:

> 
> 
> Am 16.03.22 um 11:56 schrieb Gerald Schaefer:
> > On Tue, 15 Mar 2022 18:12:16 +0100
> > David Hildenbrand <david at redhat.com> wrote:
> > 
> >> On 15.03.22 17:58, David Hildenbrand wrote:
> >>>
> >>>>> This would mean that it is not OK to have bit 52 not zero for swap PTEs.
> >>>>> But if I read the POP correctly, all bits except for the DAT-protection
> >>>>> would be ignored for invalid PTEs, so maybe this comment needs some update
> >>>>> (for both bits 52 and also 55).
> >>>>>
> >>>>> Heiko might also have some more insight.
> >>>>
> >>>> Indeed, I wonder why we should get a specification exception when the
> >>>> PTE is invalid. I'll dig a bit into the PoP.
> >>>
> >>> SA22-7832-12 6-46 ("Translation-Specification Exception") is clearer
> >>>
> >>> "The page-table entry used for the translation is
> >>> valid, and bit position 52 does not contain zero."
> >>>
> >>> "The page-table entry used for the translation is
> >>> valid, EDAT-1 does not apply, the instruction-exe-
> >>> cution-protection facility is not installed, and bit
> >>> position 55 does not contain zero. It is model
> >>> dependent whether this condition is recognized."
> >>>
> >>
> >> I wonder if the following matches reality:
> >>
> >> diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
> >> index 008a6c856fa4..6a227a8c3712 100644
> >> --- a/arch/s390/include/asm/pgtable.h
> >> +++ b/arch/s390/include/asm/pgtable.h
> >> @@ -1669,18 +1669,16 @@ static inline int has_transparent_hugepage(void)
> >>   /*
> >>    * 64 bit swap entry format:
> >>    * A page-table entry has some bits we have to treat in a special way.
> >> - * Bits 52 and bit 55 have to be zero, otherwise a specification
> >> - * exception will occur instead of a page translation exception. The
> >> - * specification exception has the bad habit not to store necessary
> >> - * information in the lowcore.
> >>    * Bits 54 and 63 are used to indicate the page type.
> >>    * A swap pte is indicated by bit pattern (pte & 0x201) == 0x200
> >> - * This leaves the bits 0-51 and bits 56-62 to store type and offset.
> >> - * We use the 5 bits from 57-61 for the type and the 52 bits from 0-51
> >> - * for the offset.
> >> - * |                     offset                        |01100|type |00|
> >> + * |                     offset                        |XX1XX|type |S0|
> >>    * |0000000000111111111122222222223333333333444444444455|55555|55566|66|
> >>    * |0123456789012345678901234567890123456789012345678901|23456|78901|23|
> >> + *
> >> + * Bits 0-51 store the offset.
> >> + * Bits 57-62 store the type.
> >> + * Bit 62 (S) is used for softdirty tracking.
> >> + * Bits 52, 53, 55 and 56 (X) are unused.
> >>    */
> >>   
> >>   #define __SWP_OFFSET_MASK      ((1UL << 52) - 1)
> >>
> >>
> >> I'm not sure why bit 53 was indicated as "1" and bit 55 was indicated as
> >> "0". At least for 52 and 55 there was a clear description.
> > 
> > Bit 53 is the invalid bit, and that is always 1 for swap ptes, in addition
> > to protection bit 54. Bit 55, along with bit 52, has to be zero according
> > to the (potentially deprecated) comment.
> > 
> > It is interesting that bit 56 seems to be unused, at least according
> > to the comment, but that would also mention bit 62 as unused, so that
> > clearly needs some update.
> > 
> > If bit 56 could be used for _PAGE_SWP_EXCLUSIVE, that would be better
> > than stealing a bit from the offset, or using potentially dangerous
> > bit 52. It is defined as _PAGE_UNUSED and only used for kvm, not sure
> > if this is also relevant for swap ptes, similar to bit 62.
> > 
> > Adding Christian on cc, maybe he has some insight on _PAGE_UNUSED
> > bit 56 and swap ptes.
> 
> I think _PAGE_UNUSED is not used for swap ptes. It is used _before_ swapping
> to decide whether we swap or discard the page.
> 
> Regarding bit 52, the POP says in chapter 3 for the page table entry
> 
> [..]
> Page-Invalid Bit (I): Bit 53 controls whether the
> page associated with the page-table entry is avail-
> able. When the bit is zero, address translation pro-
> ceeds by using the page-table entry. When the bit is
> one, the page-table entry cannot be used for transla-
> tion.
> 
> 
> -->When the page-invalid bit is one, all other bits in the
> -->page-table entry are available for use by program-
> -->ming.
> 
> this was added with the z14 POP, but I guess it was just a clarification
> and should be valid for older machines as well.
> So 52 and 56 should be ok, with 52 probably the better choice.

Ok, bit 55 would then also be an option IIUC, since execution protection
should not be relevant for swap ptes. And Davids clean-up removing the
restriction for bit 52 and 55 in the comment would make sense.

I would also favor bit 52 though (PAGE_LARGE), as in Davids initial patch
version, since this is never used for any real ptes. The PAGE_LARGE flag
is only set in the "virtual" large ptes that the hugetlb code is seeing
from huge_ptep_get(). But it will (and must) never be written as a valid
pte, or else it will generate an exception. IIRC, we only set it to detect
such possible bugs, e.g. hugetlb code writing a pte (which really is a
pmd/pud) directly, instead of using set_huge_pte_at().


More information about the Linuxppc-dev mailing list