[PATCH v2][POWERPC] Always build setup-bus.c on powerpc

[Kumar Gala]

The common arch/powerpc code calls in to functions in setup-bus.c
so some builds of ppc32 would fail.

Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be
removed when arch/ppc goes away.

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---

Here's the proper diff, will send this via paulus.

 drivers/pci/Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 5550556..f697f3d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,7 +32,7 @@ obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PPC32) += setup-irq.o
-obj-$(CONFIG_PPC64) += setup-bus.o
+obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o

-- 
1.5.3.7